Wraps by car

Infiniti QX30 wrap

The Infiniti QX30 wrap is a full vinyl wrap for this compact SUV. The QX30 was produced in one generation, from 2015 to 2020. A complete wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Infiniti QX30, first generation, factory photo
Infiniti QX30, first generation. Factory color shown.

Infiniti QX30 wrap colors and ideas

  • Infiniti QX30 black wrap
  • Infiniti QX30 white wrap
  • Infiniti QX30 gray wrap
  • Infiniti QX30 silver wrap
  • Infiniti QX30 red wrap
  • Infiniti QX30 blue wrap
  • Infiniti QX30 green wrap
  • Infiniti QX30 yellow wrap
  • Infiniti QX30 orange wrap
  • Infiniti QX30 purple wrap
  • Infiniti QX30 pink wrap
  • Infiniti QX30 teal wrap
  • Infiniti QX30 brown wrap
  • Infiniti QX30 gold wrap
  • Infiniti QX30 chrome wrap
  • Infiniti QX30 color shift wrap
  • Infiniti QX30 carbon fiber wrap
  • Infiniti QX30 camo and patterned wrap

How much vinyl to wrap an Infiniti QX30

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2020SUV (5 doors)174.2 in (4,425 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Infiniti QX30 wrap cost factors

Infiniti QX30 wrap cost depends on the size of the body and the amount of film. A full wrap uses about 49 ft (15 m) of 60-inch cast film, while chrome or patterned film uses about 57 ft (17.5 m). The number of cut-outs for sensors and cameras adds labor time.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Infiniti QX30 wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti QX30, first generation, factory photo
Factory color shown

2015–2020 Infiniti QX30 SUV (first generation)

2015–2020SUV (5 doors)174.2 in (4,425 mm)

The first-generation Infiniti QX30 has a panoramic glass roof on every trim. The roof itself is not wrapped, so it stays dark whatever the color of the film. The wrap stops at the roof rails, which remain uncovered or are removed for a seamless look.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Infiniti QX30

Partial wrap on an Infiniti QX30 can cover the hood, mirror caps, or tailgate. Infiniti QX30 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti QX30: body, cut-outs and film

An Infiniti QX30 vinyl wrap covers a 5-door SUV body that is 174.2 in (4,425 mm) long. The straight sides and modest curves keep material use predictable. The tailgate includes the rear glass, so film ends at the glass edge.

Infiniti QX30 wrap ideas start with the parts that need cut-outs or removal. The panoramic glass roof is not wrapped, and the film ends at the roof rails. The roof rails come off before the roof is wrapped, or the film is cut along them. Parking sensors, cameras, and fog lamps need precise cut-outs in the bumper and body film.

How much vinyl to wrap an Infiniti QX30? The QX30 has only one generation, so the film estimate stays the same for all years. A standard color change uses about 49 ft (15 m) of 60-inch cast film. Chrome or patterned film adds up to about 57 ft (17.5 m).

Questions about wrapping an Infiniti QX30

How much vinyl does it take to wrap an Infiniti QX30?

A full wrap of an Infiniti QX30 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 57 ft (17.5 m). These figures cover the entire body of the one-generation QX30.

Can the roof of an Infiniti QX30 be wrapped?

Yes, the roof of an Infiniti QX30 can be wrapped, but only the metal areas. The panoramic glass roof is not wrapped, so the film covers only the edges around the glass. The roof rails must be removed or the film cut along them.

Can I wrap only the hood or the roof of an Infiniti QX30?

Yes, you can wrap only the hood or the roof of an Infiniti QX30. A hood wrap is a common partial job, and the roof can be wrapped except for the glass panel. Other partial options include mirror caps and tailgate.

Is an Infiniti QX30 hard to wrap?

The Infiniti QX30 is moderately difficult to wrap because of several cut-outs. Every trim has parking sensors in the bumpers, cameras in the body, and fog lamps in the front bumper, all requiring precise film trimming. The panoramic glass roof and roof rails also add steps to a roof wrap.