Wraps by car

Infiniti M wrap

The Infiniti M wrap page covers four generations of the full-size Infiniti M sedan and early convertible. A vinyl wrap changes the color or finish of the car without a respray. The newest Infiniti M body uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap.

4generations18.5 mof film for a full wrap

Infiniti M, fourth generation, factory photo
Infiniti M, fourth generation. Factory color shown.

Infiniti M wrap colors and ideas

  • Infiniti M black wrap
  • Infiniti M white wrap
  • Infiniti M gray wrap
  • Infiniti M silver wrap
  • Infiniti M red wrap
  • Infiniti M blue wrap
  • Infiniti M green wrap
  • Infiniti M yellow wrap
  • Infiniti M orange wrap
  • Infiniti M purple wrap
  • Infiniti M pink wrap
  • Infiniti M teal wrap
  • Infiniti M brown wrap
  • Infiniti M gold wrap
  • Infiniti M chrome wrap
  • Infiniti M color shift wrap
  • Infiniti M carbon fiber wrap
  • Infiniti M camo and patterned wrap

How much vinyl to wrap an Infiniti M

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2013sedan (4 doors)194.7 in (4,945 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2005–2010sedan (4 doors)192.5 in (4,890 mm) to 192.9 in (4,900 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2002–2004sedan (4 doors)197.2 in (5,010 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1989–1992convertible, coupe (2 doors)188.8 in (4,796 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Infiniti M wrap cost factors

An Infiniti M wrap cost depends on the car's size, generation, and the film chosen. The sedan bodies measure between 192.5 in (4,890 mm) and 197.2 in (5,010 mm), which determines the amount of film used. A full wrap on the fourth generation needs about 61 ft (18.5 m) of film, and a chrome or patterned film requires about 70 ft (21.5 m). Extra cut-outs for sunroofs, sensors, and fog lamps add labor time, and a chrome delete adds more wrap work.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Infiniti M wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti M, fourth generation, factory photo
Factory color shown

2010–2013 Infiniti M sedan (fourth generation)

2010–2013sedan (4 doors)194.7 in (4,945 mm)

The fourth generation Infiniti M from 2010 to 2013 is a full-size sedan with a length of 194.7 in (4,945 mm). Its paint age matters because panels may be original or repainted, so a test spot comes before a full wrap. A full wrap needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a standard color change. Every trim has a sunroof, parking sensors, cameras, and fog lamps, so the film is cut around each opening and sensor.

Every trim has a sunroof: the roof film is cut around its opening.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Infiniti M, third generation, factory photo
Factory color shown

2005–2010 Infiniti M sedan (third generation)

2005–2010sedan (4 doors)192.5 in (4,890 mm) to 192.9 in (4,900 mm)

The third generation Infiniti M from 2005 to 2010 is a full-size sedan measuring 192.5 in (4,890 mm) to 192.9 in (4,900 mm). The restyling in 2008 changed the bumpers and lights, so film cut for one version does not fit the other. A full wrap takes about 59 ft (18 m) of standard film, or about 69 ft (21 m) with chrome or patterned film. Some trims have a sunroof, and the roof film is cut around its opening.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Infiniti M, second generation, factory photo
Factory color shown

2002–2004 Infiniti M sedan (second generation)

2002–2004sedan (4 doors)197.2 in (5,010 mm)

The second generation Infiniti M from 2002 to 2004 is a full-size sedan with a length of 197.2 in (5,010 mm). Its size and four-door body mean the roof, hood, and side panels are large, so a full wrap needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The number of panels is standard for a sedan, but the longer body adds a little extra film on the rear quarter panels. Chrome or patterned film raises the total to about 70 ft (21.5 m).

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Infiniti M, first generation, factory photo
Factory color shown

1989–1992 Infiniti M convertible, coupe (first generation)

1989–1992convertible, coupe (2 doors)188.8 in (4,796 mm)

The first generation Infiniti M from 1989 to 1992 came as a convertible or a two-door coupe with a length of 188.8 in (4,796 mm). On a convertible, a fabric top is not wrapped and the film ends where the top begins, while a folding hard top is wrapped as panels of its own. The two long side doors are each one large piece of film, which takes careful handling. A full wrap on this body needs about 49 ft (15 m) of standard film, or about 56 ft (17 m) with chrome or patterned film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Infiniti M

An Infiniti M chrome delete covers window trim, decorative moldings, and badges with black film. A partial wrap can cover the roof, hood, or mirror caps instead of the whole car. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be completed in less time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti M: body, cut-outs and film

The Infiniti M vinyl wrap is shaped by the car's full-size sedan body and its length. The fourth generation measures 194.7 in (4,945 mm), so a full wrap needs large film pieces on the roof, hood, and doors. The earlier third generation is slightly shorter at 192.5 in (4,890 mm) to 192.9 in (4,900 mm), but the panel count stays similar. The second generation is longest at 197.2 in (5,010 mm), and the first generation convertible or coupe is shorter at 188.8 in (4,796 mm).

Infiniti M wrap ideas include chrome delete, partial wraps, and paint protection film (PPF). Every trim of the fourth generation has a sunroof, so the roof film is cut around its opening. Parking sensors and cameras require film cut around each sensor and lens, and fog lamps in the front bumper need cut-outs. Some trims have bright decorative moldings that stay bright next to the film unless a chrome delete covers them.

How much vinyl to wrap an Infiniti M depends on the generation and body style. The first generation convertible or coupe needs about 49 ft (15 m) of standard film, while the sedan generations need roughly 59 to 61 ft (18 to 18.5 m). Film with chrome or patterns adds about 9 to 10 ft (2.7 to 3 m) to the total because of extra waste. The third generation has two versions after the 2008 restyling, and film cut for one version does not fit the other.

Questions about wrapping an Infiniti M

How much vinyl does it take to wrap an Infiniti M?

A full wrap on the newest Infiniti M body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 70 ft (21.5 m) because of extra waste. The estimate is for the fourth generation sedan from 2010 to 2013.

Can the roof of an Infiniti M be wrapped?

Yes, the roof of an Infiniti M can be wrapped. On trims with a sunroof, the film is cut around the opening so the glass stays clear. The roof is often done as a partial wrap in a contrasting color.

Can I wrap only the hood or the roof of an Infiniti M?

Yes, you can wrap only the hood or the roof of an Infiniti M. A partial wrap covers the roof, hood, or mirror caps, and a chrome delete covers window trim, decorative moldings, and badges. Paint protection film (PPF) is a clear option for the front end.

Is an Infiniti M hard to wrap?

An Infiniti M is not especially hard to wrap, but its size and features add work. The full-size sedan is over 192 in (4,890 mm) long, so large panels take more time to lay smoothly. Cut-outs for sunroofs, parking sensors, cameras, and fog lamps require precision, and chrome delete adds finishing detail.