Wraps by car

Infiniti Q45 wrap

The Infiniti Q45 wrap guide covers all three generations of this luxury sedan, from 1989 to 2006. A full wrap of the 2001–2006 body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 70 ft (21.5 m). The page explains how to plan film, cut-outs and partial jobs.

3generations19 mof film for a full wrap

Infiniti Q45, third generation, factory photo
Infiniti Q45, third generation. Factory color shown.

Infiniti Q45 wrap colors and ideas

  • Infiniti Q45 black wrap
  • Infiniti Q45 white wrap
  • Infiniti Q45 gray wrap
  • Infiniti Q45 silver wrap
  • Infiniti Q45 red wrap
  • Infiniti Q45 blue wrap
  • Infiniti Q45 green wrap
  • Infiniti Q45 yellow wrap
  • Infiniti Q45 orange wrap
  • Infiniti Q45 purple wrap
  • Infiniti Q45 pink wrap
  • Infiniti Q45 teal wrap
  • Infiniti Q45 brown wrap
  • Infiniti Q45 gold wrap
  • Infiniti Q45 chrome wrap
  • Infiniti Q45 color shift wrap
  • Infiniti Q45 carbon fiber wrap
  • Infiniti Q45 camo and patterned wrap

How much vinyl to wrap an Infiniti Q45

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2006sedan (4 doors)199.6 in (5,070 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1996–2001sedan (4 doors)199.6 in (5,070 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1989–1996sedan (4 doors)199.8 in (5,075 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Infiniti Q45 wrap cost factors

Infiniti Q45 wrap cost depends on the amount of film, the chosen finish and the labor for disassembly. The first generation needs about 56 ft (17 m) of 60-inch (1.52 m) film, while the second and third need 61–62 ft (18.5–19 m). Removing chrome parts and door handles adds time. A partial wrap or paint protection film (PPF) on the front end uses less material.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2004: bumpers and lights differ between the versions, and so do the film cuts.

Infiniti Q45 wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti Q45, third generation, factory photo
Factory color shown

2001–2006 Infiniti Q45 sedan (third generation)

2001–2006sedan (4 doors)199.6 in (5,070 mm)

The third generation Infiniti Q45, sold from 2001 to 2006, was restyled in 2004 with new bumpers and lights. A wrapper cannot use the same bumper pattern for a 2001 car and a 2005 car. The body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Plan separate templates for pre- and post-restyling cars.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Infiniti Q45, second generation, factory photo
Factory color shown

1996–2001 Infiniti Q45 sedan (second generation)

1996–2001sedan (4 doors)199.6 in (5,070 mm)

The second generation Infiniti Q45, sold from 1996 to 2001, often has original or repainted panels. A test spot with the vinyl on a hidden area checks whether the paint will hold the adhesive. This body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome delete on this car covers window trim and badges.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Infiniti Q45, first generation, factory photo
Factory color shown

1989–1996 Infiniti Q45 sedan (first generation)

1989–1996sedan (4 doors)199.8 in (5,075 mm)

The first generation Infiniti Q45, sold from 1989 to 1996, is a large sedan at 199.8 in (5,075 mm). Its film estimate is about 56 ft (17 m) of 60-inch (1.52 m) cast film, the lowest of the three generations. The car has four doors, a long hood and a large trunk lid. Fewer complex curves can make this body easier to wrap than later ones.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Infiniti Q45

On an Infiniti Q45, a partial wrap covers the roof, hood or mirror caps. An Infiniti Q45 chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use far less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti Q45: body, cut-outs and film

An Infiniti Q45 vinyl wrap covers a large four-door sedan, so installers plan for long roof and hood panels. The first and second generations measure 199.8 in (5,075 mm) and 199.6 in (5,070 mm) respectively, while the third is 199.6 in (5,070 mm). The third generation can use about 62 ft (19 m) of 60-inch (1.52 m) cast film. The first generation needs only about 56 ft (17 m), so film estimates differ.

Infiniti Q45 wrap ideas work best when you account for chrome trim around the windows and badges. These bright parts need either a chrome delete with black film or careful cut-outs. Door handles and mirrors are removed for a clean edge, and the bumpers of the 2004 restyling have different shapes. A test fit of film on the front bumper saves time.

How much vinyl to wrap an Infiniti Q45 depends on the generation. The first generation from 1989–1996 uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. The second and third generations need about 61 ft (18.5 m) and 62 ft (19 m) respectively. The 2004 restyling of the third generation changed bumper and light shapes, so film cut for a 2001–2003 car will not fit the later version.

Questions about wrapping an Infiniti Q45

How much vinyl does it take to wrap an Infiniti Q45?

About 62 ft (19 m) of 60-inch (1.52 m) cast film wraps the newest Infiniti Q45 body. Chrome or patterned film raises the figure to about 70 ft (21.5 m). The first generation needs about 56 ft (17 m) and the second about 61 ft (18.5 m). Extra film is needed for door jambs and mistakes.

Which years of the Infiniti Q45 take the same film cuts?

The 2001–2003 Infiniti Q45 cars share one set of film cuts. The 2004–2006 cars, with restyled bumpers and lights, need different cuts. The 1996–2001 second generation and the 1989–1996 first generation each have their own templates. No generation shares a bumper pattern with another after a restyling.

Can I wrap only the hood or the roof of an Infiniti Q45?

Yes, you can wrap only the hood or the roof of an Infiniti Q45. A partial wrap is a common smaller job and uses much less film than a full wrap. Mirror caps can also be wrapped on their own. For front-end protection, a clear paint protection film is applied to the bumper and hood.

Is an Infiniti Q45 hard to wrap?

An Infiniti Q45 is not especially hard to wrap, but its size and chrome trim add work. The car is nearly 17 ft long, so you need long runs of film on the roof and hood. The chrome window trim and badges require either removal, masking or a chrome delete. The 2004 restyling creates two bumper shapes that need separate patterns.