Wraps by car

Infiniti FX wrap

The Infiniti FX wrap page covers the first two generations of the Infiniti FX SUV. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The first generation needs slightly less film, about 64 ft (19.5 m) of the same width.

2generations20 mof film for a full wrap

Infiniti FX, second generation, factory photo
Infiniti FX, second generation. Factory color shown.

Infiniti FX wrap colors and ideas

  • Infiniti FX black wrap
  • Infiniti FX white wrap
  • Infiniti FX gray wrap
  • Infiniti FX silver wrap
  • Infiniti FX red wrap
  • Infiniti FX blue wrap
  • Infiniti FX green wrap
  • Infiniti FX yellow wrap
  • Infiniti FX orange wrap
  • Infiniti FX purple wrap
  • Infiniti FX pink wrap
  • Infiniti FX teal wrap
  • Infiniti FX brown wrap
  • Infiniti FX gold wrap
  • Infiniti FX chrome wrap
  • Infiniti FX color shift wrap
  • Infiniti FX carbon fiber wrap
  • Infiniti FX camo and patterned wrap

How much vinyl to wrap an Infiniti FX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2013SUV (5 doors)191.5 in (4,865 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
2002–2009SUV (5 doors)189.2 in (4,805 mm) to 189.8 in (4,820 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Infiniti FX wrap cost factors

Infiniti FX wrap cost depends on the film amount, body size, and the labor for cut-outs. A full wrap uses about 64 to 66 ft (19.5 to 20 m) of cast film, with more for chrome or patterned film. The five-door SUV body has fog lamps, sensors, and cameras that require extra cutting time. Removing roof rails or wrapping around a sunroof also affects the labor.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2011: bumpers and lights differ between the versions, and so do the film cuts.

Infiniti FX wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti FX, second generation, factory photo
Factory color shown

2008–2013 Infiniti FX SUV (second generation)

2008–2013SUV (5 doors)191.5 in (4,865 mm)

The second-generation Infiniti FX from 2008 to 2013 has a glass roof on some trims. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the edge of the glass, and the roof rails remain unwrapped. This leaves a visible contrast between the painted film and the dark glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Infiniti FX, first generation, factory photo
Factory color shown

2002–2009 Infiniti FX SUV (first generation)

2002–2009SUV (5 doors)189.2 in (4,805 mm) to 189.8 in (4,820 mm)

The first-generation Infiniti FX from 2002 to 2009 is an older vehicle with potential paint age issues. Panels may be original or repainted, so a test spot comes before a full wrap to check paint adhesion. The car has a sunroof on every trim, and the roof film is cut around its opening. Every trim also has fog lamps that require cut-outs in the bumper film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Infiniti FX

A partial wrap on an Infiniti FX can cover the hood, mirror caps, or the roof on cars without the glass panel. An Infiniti FX chrome delete covers the window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti FX: body, cut-outs and film

An Infiniti FX vinyl wrap has to cover a large five-door SUV body. The second generation is 191.5 in (4,865 mm) long, while the first generation ranges from 189.2 in (4,805 mm) to 189.8 in (4,820 mm). These dimensions mean a full wrap uses about 64 to 66 ft (19.5 to 20 m) of 60-inch (1.52 m) film. The tall roof and large bumpers require careful film handling.

Infiniti FX wrap ideas must account for several cut-outs and removable parts. Every trim has fog lamps in the front bumper that need cut-outs in the bumper film. The tailgate has rear glass set into it, so the film ends at the edge of the glass. Some trims have parking sensors or cameras, and the film is cut around each sensor or lens. Roof rails on some trims are removed before wrapping the roof or the film is cut along them.

Knowing how much vinyl to wrap an Infiniti FX depends on the generation and the film type. The second generation from 2008 to 2013 needs about 66 ft (20 m) of 60-inch (1.52 m) cast film. The first generation from 2002 to 2009 requires about 64 ft (19.5 m) of the same width. Chrome or patterned film adds about 8 ft (2.5 m) to the total for either generation.

Questions about wrapping an Infiniti FX

How much vinyl does it take to wrap an Infiniti FX?

A full wrap of an Infiniti FX takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for the newest body. This figure covers the second generation from 2008 to 2013. The first generation uses slightly less, about 64 ft (19.5 m) of the same width. Chrome or patterned film adds about 8 ft (2.5 m) to the total.

Can the roof of an Infiniti FX be wrapped?

The roof of an Infiniti FX can be wrapped on cars without a glass roof. Some trims of the second generation have a panoramic glass roof, which is not wrapped and stays dark. Every trim of the first generation has a sunroof, so the roof film is cut around its opening. Roof rails on some trims are removed before wrapping or the film is cut along them.

Which years of the Infiniti FX take the same film cuts?

For the Infiniti FX, the same film cuts apply within each generation and after its restyling year. The first generation, 2002 to 2009, was restyled in 2006, so cuts are the same for 2002–2005 and for 2006–2009. The second generation, 2008 to 2013, was restyled in 2011, so cuts are the same for 2008–2010 and for 2011–2013.

Can I wrap only the hood or the roof of an Infiniti FX?

Yes, you can wrap only the hood or the roof of an Infiniti FX. A partial wrap can cover the hood, mirror caps, or the roof on cars without the glass panel. A chrome delete is another option that covers the window trim, decorative moldings, and badges. Paint protection film (PPF) is clear film applied to the front end for protection.