Wraps by car

Infiniti Q60 wrap

This Infiniti Q60 wrap page covers the second generation, produced from 2016 to now, and the first generation of 2014–2015. The catalog shows two generations of the Q60 coupe and convertible. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

2generations15.5 mof film for a full wrap

Infiniti Q60, second generation, factory photo
Infiniti Q60, second generation. Factory color shown.

Infiniti Q60 wrap colors and ideas

  • Infiniti Q60 black wrap
  • Infiniti Q60 white wrap
  • Infiniti Q60 gray wrap
  • Infiniti Q60 silver wrap
  • Infiniti Q60 red wrap
  • Infiniti Q60 blue wrap
  • Infiniti Q60 green wrap
  • Infiniti Q60 yellow wrap
  • Infiniti Q60 orange wrap
  • Infiniti Q60 purple wrap
  • Infiniti Q60 pink wrap
  • Infiniti Q60 teal wrap
  • Infiniti Q60 brown wrap
  • Infiniti Q60 gold wrap
  • Infiniti Q60 chrome wrap
  • Infiniti Q60 color shift wrap
  • Infiniti Q60 carbon fiber wrap
  • Infiniti Q60 camo and patterned wrap

How much vinyl to wrap an Infiniti Q60

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowcoupe (2 doors)184.6 in (4,690 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
2014–2015convertible, coupe (2 doors)183.2 in (4,653 mm) to 183.5 in (4,660 mm)about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Infiniti Q60 wrap cost factors

Infiniti Q60 wrap cost depends on the body style, the film type, and how many parts come off. The car is a mid-size coupe, so a full wrap uses about 51 ft (15.5 m) of 60-inch film. Extra cut-outs for sensors, cameras, and fog lamps add labor. A chrome delete adds another layer of work on the bright trim.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Infiniti Q60 wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti Q60, second generation, factory photo
Factory color shown

2016–now Infiniti Q60 coupe (second generation)

2016–nowcoupe (2 doors)184.6 in (4,690 mm)

The second generation Infiniti Q60 is a coupe that measures 184.6 in (4,690 mm) long. Its two side doors are long but each can be covered with one piece of film, so panel count stays low. A full wrap of this body takes about 51 ft (15.5 m) of 60-inch cast film. Some trims have a sunroof that requires a cut-out in the roof panel.

Two long side doors: each door is one large piece of film.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Infiniti Q60, first generation, factory photo
Factory color shown

2014–2015 Infiniti Q60 convertible, coupe (first generation)

2014–2015convertible, coupe (2 doors)183.2 in (4,653 mm) to 183.5 in (4,660 mm)

The first generation Infiniti Q60 offered a convertible whose fabric top is not wrapped, and the film ends where the top begins. If the open top is a folding hard top, it is wrapped as its own separate panels. The convertible body takes less film than the coupe, about 49 ft (15 m). The coupe of this generation measures up to 183.5 in (4,660 mm) and takes about the same film as the newer coupe.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Infiniti Q60

An Infiniti Q60 chrome delete covers the window trim, decorative moldings, and badges in black film. A partial wrap on this car can cover the roof, hood, or mirror caps. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs let you change the look without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti Q60: body, cut-outs and film

The Infiniti Q60 vinyl wrap depends on its mid-size coupe body with two long doors. Each door is one large piece of film, which keeps the side panels simple. A full wrap of the second generation uses about 51 ft (15.5 m) of film. Some trims have a sunroof, so the roof film is cut around its opening.

Infiniti Q60 wrap ideas should account for the factory trim on this car. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Every trim also has cameras in the body and fog lamps in the front bumper, which need cut-outs. Some trims have bright decorative moldings that stay bright unless you order a chrome delete.

How much vinyl to wrap an Infiniti Q60 changes between the two generations. The second generation of 2016–now is a coupe 184.6 in (4,690 mm) long, needing about 51 ft (15.5 m) of film. The first generation of 2014–2015 offered convertible and coupe bodies, from 183.2 in (4,653 mm) to 183.5 in (4,660 mm) long. The convertible takes about 49 ft (15 m), while the coupe takes the same amount as the newer car.

Questions about wrapping an Infiniti Q60

How much vinyl does it take to wrap an Infiniti Q60?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap the second generation Infiniti Q60. That figure covers the full coupe body from 2016 to now. The first generation convertible uses about 49 ft (15 m) of the same width film.

Can the roof of an Infiniti Q60 be wrapped?

Yes, the roof of an Infiniti Q60 can be wrapped. Some trims have a sunroof, so the film is cut around its opening. The roof is also one of the panels offered as a partial wrap, along with the hood and mirror caps.

Can I wrap only the hood or the roof of an Infiniti Q60?

Yes, you can wrap only the hood or the roof of an Infiniti Q60. The partial wrap options on this page include the roof, hood, and mirror caps. You can also order a chrome delete for the window trim and moldings or paint protection film for the front end.

Is an Infiniti Q60 hard to wrap?

The Infiniti Q60 has details that add work, but the body itself is straightforward. The mid-size coupe is 184.6 in (4,690 mm) long on the latest generation, and each long side door is one piece of film. Every trim has parking sensors, cameras, and fog lamps that need cut-outs. Some trims also have a sunroof or bright moldings, which means more cutting or a chrome delete.