Wraps by car

Infiniti JX wrap

This Infiniti JX wrap guide covers the 2012–2014 SUV in one generation, with a full vinyl wrap taking about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

1generations20.5 mof film for a full wrap

Infiniti JX, first generation, factory photo
Infiniti JX, first generation. Factory color shown.

Infiniti JX wrap colors and ideas

  • Infiniti JX black wrap
  • Infiniti JX white wrap
  • Infiniti JX gray wrap
  • Infiniti JX silver wrap
  • Infiniti JX red wrap
  • Infiniti JX blue wrap
  • Infiniti JX green wrap
  • Infiniti JX yellow wrap
  • Infiniti JX orange wrap
  • Infiniti JX purple wrap
  • Infiniti JX pink wrap
  • Infiniti JX teal wrap
  • Infiniti JX brown wrap
  • Infiniti JX gold wrap
  • Infiniti JX chrome wrap
  • Infiniti JX color shift wrap
  • Infiniti JX carbon fiber wrap
  • Infiniti JX camo and patterned wrap

How much vinyl to wrap an Infiniti JX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2014SUV (5 doors)196.5 in (4,990 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Infiniti JX wrap cost factors

The Infiniti JX wrap cost depends on the 196.5 in (4,990 mm) long body, which uses about 67 ft (20.5 m) of 60-inch (1.52 m) film, and the work for cut-outs and trim. A chrome delete or a partial wrap uses less film and less labor than a full color change. The final figure also depends on the film you choose, because a patterned or chrome film requires more material and careful alignment.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Infiniti JX wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti JX, first generation, factory photo
Factory color shown

2012–2014 Infiniti JX SUV (first generation)

2012–2014SUV (5 doors)196.5 in (4,990 mm)

The first generation Infiniti JX (2012–2014) has a glass roof on some trims, and that panel is not wrapped, so the roof stays dark whatever the color of the film. If the car has roof rails, they are removed or the film is cut along them before the roof is covered. The film estimate stays the same for every year of this generation because the body length of 196.5 in (4,990 mm) does not change.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an Infiniti JX

A partial wrap on an Infiniti JX covers the hood, mirror caps, and the roof on cars without the glass panel, leaving the rest of the body in its original paint. An Infiniti JX chrome delete covers the window trim, decorative moldings, and badges with black film to change the bright metal look. Clear paint protection film (PPF) on the front end protects the hood, bumper, and mirror caps from stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti JX: body, cut-outs and film

The Infiniti JX vinyl wrap covers a five-door SUV measuring 196.5 in (4,990 mm) long, so film joins fall on large flat panels. Its tall sides and rear bumper add surface area, and the tailgate runs almost the full height of the body. A color change wrap on the JX uses one continuous piece for each side, but the roof, hood, and bumpers are cut separately.

Infiniti JX wrap ideas include cutting the film around the rear glass in the tailgate, so the edge of the film ends at the glass. Some trims have a panoramic glass roof, which is not wrapped, and the film ends at the roof rails, while a sunroof requires a cut-out in the roof film. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them, and bright decorative moldings stay bright unless a chrome delete covers them. Parking sensors, cameras, and fog lamps in the bumpers all need cut-outs in the bumper film.

To know how much vinyl to wrap an Infiniti JX, use the estimate for the only body made from 2012 to 2014: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 77 ft (23.5 m) because the pattern must be matched on the panels. Since this model was built for only three years, the body dimensions do not change between production years.

Questions about wrapping an Infiniti JX

How much vinyl does it take to wrap an Infiniti JX?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap an Infiniti JX fully. For a chrome or patterned film, plan for about 77 ft (23.5 m) because the pattern must be matched across the panels.

Can the roof of an Infiniti JX be wrapped?

Yes, the roof of an Infiniti JX can be wrapped on cars without the panoramic glass panel. On trims with that glass panel, the roof is not wrapped, and the film ends at the roof rails, so the glass stays dark.

Can I wrap only the hood or the roof of an Infiniti JX?

Yes, you can wrap only the hood, the mirror caps, or the roof of an Infiniti JX if it does not have the glass panel. A hood and roof partial wrap uses less film than a full wrap, and the hood is a straightforward flat surface on this SUV.

Is an Infiniti JX hard to wrap?

The Infiniti JX is moderately hard to wrap because its 196.5 in (4,990 mm) body is large and has many trim and sensor details. The tailgate includes the rear glass, and some trims have a panoramic glass roof, sunroof, roof rails, parking sensors, cameras, and fog lamps, all of which need careful film cut-outs or removal.