Wraps by car

Kia Avella wrap

The Kia Avella wrap page covers the first-generation subcompact produced from 1994 to 2003. This single generation includes hatchback and sedan body styles with three, four, or five doors. A full vinyl wrap of the newest body takes about 43 ft (13 m) for the hatchback to 51 ft (15.5 m) for the sedan.

1generations15.5 mof film for a full wrap

Kia Avella, first generation, factory photo
Kia Avella, first generation. Factory color shown.

Kia Avella wrap colors and ideas

  • Avella black wrap
  • Avella white wrap
  • Avella gray wrap
  • Avella silver wrap
  • Avella red wrap
  • Avella blue wrap
  • Avella green wrap
  • Avella yellow wrap
  • Avella orange wrap
  • Avella purple wrap
  • Avella pink wrap
  • Avella teal wrap
  • Avella brown wrap
  • Avella gold wrap
  • Avella chrome wrap
  • Avella color shift wrap
  • Avella carbon fiber wrap
  • Avella camo and patterned wrap

How much vinyl to wrap a Kia Avella

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2003hatchback, sedan (3 or 4 or 5 doors)140.4 in (3,565 mm) to 164.0 in (4,165 mm)about 43 ft (13 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Avella wrap cost factors

Avella wrap cost depends on the film amount, the body style, and the condition of the paint. The hatchback uses about 43 ft (13 m) of film, while the sedan uses about 51 ft (15.5 m), so the sedan costs more in material. The small size of the Avella keeps the total film needed lower than on a mid-size car. Labor time is influenced by the tailgate glass and the number of doors, but the panels are flat and simple.

  • Film for a full wrap: about 43 ft (13 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: hatchback, sedan (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Avella wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Avella, first generation, factory photo
Factory color shown

1994–2003 Avella hatchback, sedan (first generation)

1994–2003hatchback, sedan (3 or 4 or 5 doors)140.4 in (3,565 mm) to 164.0 in (4,165 mm)

The first generation Kia Avella from 1994 to 2003 is the only generation sold, and it comes in hatchback and sedan styles. The hatchback is the shorter version and takes about 43 ft (13 m) of 60-inch film. The sedan is longer and takes about 51 ft (15.5 m) of the same film. The style decides the panel plan and the film amount for the installer.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Avella

An Avella chrome delete covers the window trim and badges with black film to change the look. A partial wrap can be the roof, hood, or mirror caps only, and it uses far less film than a full wrap. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips. These smaller jobs are a way to change the Avella without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Avella: body, cut-outs and film

A Kia Avella vinyl wrap is a straightforward job because the car is a compact subcompact with short panels. The hatchback is shorter at 140.4 in (3,565 mm) and needs about 43 ft (13 m) of 60-inch (1.52 m) cast film. The longer sedan measures up to 164.0 in (4,165 mm) and uses about 51 ft (15.5 m) of the same film. The three-door, four-door, and five-door versions all share the same basic panel layout.

Avella wrap ideas should account for the tailgate with integrated rear glass on hatchback models. The film ends at the edge of the glass, leaving a clean border that does not cover the window. The door handles and mirrors can be wrapped in place or removed for a neater edge. The small front and rear bumpers wrap as single pieces without relief cuts.

To know how much vinyl to wrap an Avella, compare the two body styles in the catalog. The hatchback takes about 43 ft (13 m) of cast film, while the sedan takes about 51 ft (15.5 m). A sedan with chrome or patterned film needs up to about 61 ft (18.5 m) because pattern matching adds waste. The generation stayed the same from 1994 to 2003, so these figures hold for every year.

Questions about wrapping a Kia Avella

How much vinyl does it take to wrap a Kia Avella?

A Kia Avella needs about 43 ft (13 m) of vinyl for the hatchback or 51 ft (15.5 m) for the sedan. The figure comes from the newest body in the catalog, which is the first generation produced from 1994 to 2003. The film is 60-inch (1.52 m) cast vinyl, and if you use chrome or patterned film you may need up to about 61 ft (18.5 m).

Which Avella body takes more film?

The Avella sedan takes more film than the hatchback because it is longer and has more surface area. The sedan needs about 51 ft (15.5 m) of 60-inch cast film, while the hatchback needs about 43 ft (13 m). The sedan measures up to 164.0 in (4,165 mm), and the hatchback is 140.4 in (3,565 mm), so the sedan adds about 8 ft (2.5 m) of film.

Can I wrap only the hood or the roof of an Avella?

Yes, you can wrap only the hood or the roof of an Avella as a partial wrap. A partial wrap can also be the mirror caps, and it uses much less film than a full wrap. The roof of the Avella is small and flat, so it is an easy single-piece install. The hood has a gentle curve and takes a piece that is about 4 ft by 5 ft.

Is an Avella hard to wrap?

An Avella is not hard to wrap, but the tailgate with rear glass adds a step on the hatchback. The film ends at the edge of the glass, so the installer must trim a clean line around the window. The car is small and the panels are flat, which speeds up the work. The sedan has a trunk lid with a rear lip that needs a little extra stretching.