Wraps by car

Kia Besta wrap

Kia Besta wrap covers the first generation of this minivan, produced from 1985 to 1997. A full vinyl wrap on the 184.4 in (4,685 mm) body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 80 ft (24.5 m). The van body has four doors and a tall, boxy shape.

1generations21 mof film for a full wrap

Kia Besta, first generation, factory photo
Kia Besta, first generation. Factory color shown.

Kia Besta wrap colors and ideas

  • Besta black wrap
  • Besta white wrap
  • Besta gray wrap
  • Besta silver wrap
  • Besta red wrap
  • Besta blue wrap
  • Besta green wrap
  • Besta yellow wrap
  • Besta orange wrap
  • Besta purple wrap
  • Besta pink wrap
  • Besta teal wrap
  • Besta brown wrap
  • Besta gold wrap
  • Besta chrome wrap
  • Besta color shift wrap
  • Besta carbon fiber wrap
  • Besta camo and patterned wrap

How much vinyl to wrap a Kia Besta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1997van (4 doors)184.4 in (4,685 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Besta wrap cost factors

The Besta wrap cost depends on the size of the van and the film you choose. A full wrap on the 184.4 in (4,685 mm) body uses about 69 ft (21 m) of film, or 80 ft (24.5 m) for chrome or patterned film. The tall roof and sliding door tracks add labor time. Partial jobs like the hood or roof cost less because they use less film and take less time.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (76.6 in (1,945 mm)): the roof is wrapped from a platform.

Besta wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Besta, first generation, factory photo
Factory color shown

1985–1997 Besta van (first generation)

1985–1997van (4 doors)184.4 in (4,685 mm)

The first generation Kia Besta has sliding side doors where the tracks stay bare and decide where the film is cut. The wrap installer trims the film along the track edges to allow the door to slide freely. This van was built from 1985 to 1997 with a four-door body style. Its length of 184.4 in (4,685 mm) and height of 76.6 in (1,945 mm) make it a sizable project.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (76.6 in (1,945 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Besta

A partial wrap on the Kia Besta can cover the roof, hood, or mirror caps. For a Besta chrome delete, you can cover the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. All of these jobs use less film than a full vinyl wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Besta: body, cut-outs and film

The Kia Besta vinyl wrap needs film sized for a large minivan body. With a length of 184.4 in (4,685 mm) and a height of 76.6 in (1,945 mm), the van has plenty of surface area. The four-door van body has large flat panels that make the wrap straightforward on the sides. However, the tall roof requires a platform for safe installation.

The Besta wrap ideas include handling the sliding side door tracks, which stay bare and guide where the film is cut. Cut-outs are needed around the door handles and window trim. The side mirrors, door handles, and badges come off for a cleaner finish. The front grille and rear hatch opening also require careful trimming.

How much vinyl to wrap a Besta depends on the film type and the body's size. For a full color change wrap, about 69 ft (21 m) of 60-inch (1.52 m) cast film is needed. If you want chrome or patterned film, the estimate rises to about 80 ft (24.5 m). The first generation and only generation lasted from 1985 to 1997, so no differences between generations affect the film count.

Questions about wrapping a Kia Besta

How much vinyl does it take to wrap a Kia Besta?

About 69 ft (21 m) of 60-inch (1.52 m) cast film is needed to wrap a Kia Besta. If you choose chrome or patterned film, plan for about 80 ft (24.5 m). This estimate covers the full body of the first generation van. The amount reflects the length and height of the vehicle.

Are the sliding doors of a Besta wrapped?

No, the sliding door tracks of a Besta are not wrapped. The tracks stay bare to allow the doors to slide properly. The film is cut along the track edges for a neat finish. This is a key part of a Besta wrap.

Can I wrap only the hood or the roof of a Besta?

Yes, you can wrap only the hood or the roof of a Besta. The roof is a common partial wrap choice, but the tall body requires a platform for installation. The hood is a smaller and simpler panel to cover. Mirror caps are another option for a partial wrap.

Is a Besta hard to wrap?

A Besta is moderately hard to wrap because of its tall body and sliding door tracks. The height of 76.6 in (1,945 mm) requires a platform to reach the roof. The sliding door tracks must stay bare, so the film is cut precisely along them. The large flat sides make the work easier, but the overall size adds time.