Wraps by car

Kia Borrego wrap

The Kia Borrego wrap page covers the first-generation Kia Borrego SUV produced from 2008 to 2011. A full vinyl wrap of this body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 82 ft (25 m). Only one generation of the Borrego is in this catalog.

1generations20 mof film for a full wrap

Kia Borrego, first generation, factory photo
Kia Borrego, first generation. Factory color shown.

Kia Borrego wrap colors and ideas

  • Borrego black wrap
  • Borrego white wrap
  • Borrego gray wrap
  • Borrego silver wrap
  • Borrego red wrap
  • Borrego blue wrap
  • Borrego green wrap
  • Borrego yellow wrap
  • Borrego orange wrap
  • Borrego purple wrap
  • Borrego pink wrap
  • Borrego teal wrap
  • Borrego brown wrap
  • Borrego gold wrap
  • Borrego chrome wrap
  • Borrego color shift wrap
  • Borrego carbon fiber wrap
  • Borrego camo and patterned wrap

How much vinyl to wrap a Kia Borrego

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2011SUV (5 doors)192.1 in (4,880 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Borrego wrap cost factors

Borrego wrap cost depends on the film you choose and the size of the body you cover. A full wrap of the 192.1 in (4,880 mm) long SUV needs about 66 ft (20 m) of cast film. The tall roof height of 71.3 in (1,810 mm) adds labor because the installer works from a platform. The tailgate glass and trim removal also affect the hours a shop quotes.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Borrego wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Borrego, first generation, factory photo
Factory color shown

2008–2011 Borrego SUV (first generation)

2008–2011SUV (5 doors)192.1 in (4,880 mm)

The first generation Kia Borrego is a tall SUV at 71.3 in (1,810 mm). That height means the roof is wrapped from a platform, so the installer spends more time on the top. The body length of 192.1 in (4,880 mm) also means long film panels on the sides. The tailgate glass is in the tailgate, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Borrego

A partial wrap on a Kia Borrego can cover the roof, hood, or mirror caps. A Borrego chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end of the SUV. These smaller jobs use less film than a full wrap and change only part of the body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Borrego: body, cut-outs and film

A Kia Borrego vinyl wrap has to cover a five-door SUV body that is 192.1 in (4,880 mm) long. The tall body height of 71.3 in (1,810 mm) means you wrap the roof from a platform. The tailgate has the rear glass in it, so the film ends at the edge of the glass. These sizes and shapes make a full wrap a job for an installer with a ladder and a helper.

Borrego wrap ideas often start with the chrome trim around the side windows and the badges. The chrome delete bright trim is covered with black film to change the look. The tailgate needs careful cutting around the rear glass and the wiper. Door handles, mirrors and the antenna base also come off for a clean install.

When you figure how much vinyl to wrap a Borrego, the first generation is the only body style in the catalog. The 2008–2011 Borrego has the same 192.1 in (4,880 mm) length for every year. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, you need about 82 ft (25 m) because of the pattern match.

Questions about wrapping a Kia Borrego

How much vinyl does it take to wrap a Kia Borrego?

A full wrap of a Kia Borrego takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the estimate goes up to about 82 ft (25 m). The body is 192.1 in (4,880 mm) long and 71.3 in (1,810 mm) tall.

Can I wrap only the hood or the roof of a Borrego?

Yes, you can wrap only the hood or the roof of a Borrego. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film for the front end.

Is a Borrego hard to wrap?

A Borrego is not hard to wrap for an installer, but it has some extra work. The body is 71.3 in (1,810 mm) tall, so the roof is wrapped from a platform. The tailgate has the rear glass in it, and the film ends at the edge of the glass. A full wrap takes about 66 ft (20 m) of film, and the tall sides mean long films panels.

How many generations of the Borrego does this page cover?

This page covers one generation of the Borrego. The first generation ran from 2008 to 2011. Only that SUV body is in this catalog.