Wraps by car

Kia Carens wrap

The Kia Carens wrap page covers the minivan across its three generations, from 1999 to 2019. A full vinyl wrap of the newest third-generation body needs about 66 ft (20 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for roughly 76 ft (23 m).

3generations20 mof film for a full wrap

Kia Carens, third generation, factory photo
Kia Carens, third generation. Factory color shown.

Kia Carens wrap colors and ideas

  • Carens black wrap
  • Carens white wrap
  • Carens gray wrap
  • Carens silver wrap
  • Carens red wrap
  • Carens blue wrap
  • Carens green wrap
  • Carens yellow wrap
  • Carens orange wrap
  • Carens purple wrap
  • Carens pink wrap
  • Carens teal wrap
  • Carens brown wrap
  • Carens gold wrap
  • Carens chrome wrap
  • Carens color shift wrap
  • Carens carbon fiber wrap
  • Carens camo and patterned wrap

How much vinyl to wrap a Kia Carens

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2019van (5 doors)178.1 in (4,525 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2006–2012van (5 doors)178.9 in (4,545 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
1999–2006van (5 doors)175.2 in (4,450 mm) to 176.9 in (4,493 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Carens wrap cost factors

Carens wrap cost depends mainly on the film type, the condition of the paint, and the number of parts removed for a clean installation. The van's five doors and large panels require about 66 ft (20 m) of cast film, and the sliding door tracks must be cut precisely. Additional work like removing mirrors or wrapping chrome trim raises the labor involved.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Carens wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Carens, third generation, factory photo
Factory color shown

2012–2019 Carens van (third generation)

2012–2019van (5 doors)178.1 in (4,525 mm)

The third-generation Kia Carens from 2012 to 2019 has sliding side doors where the tracks stay bare and decide where the film is cut. This van is 178.1 in (4,525 mm) long and needs about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. The installer measures from the track edge to keep the film from peeling when the door opens.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Kia Carens, second generation, factory photo
Factory color shown

2006–2012 Carens van (second generation)

2006–2012van (5 doors)178.9 in (4,545 mm)

On the second-generation Kia Carens from 2006 to 2012, paint age matters more than on newer cars because panels may be original or repainted. A test spot comes before a full wrap to check adhesion on older or mismatched paint. This van is 178.9 in (4,545 mm) long and has the same sliding door tracks that must stay bare. Some trims have fog lamps in the front bumper, so the film needs cut-outs there.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Kia Carens, first generation, factory photo
Factory color shown

1999–2006 Carens van (first generation)

1999–2006van (5 doors)175.2 in (4,450 mm) to 176.9 in (4,493 mm)

The first-generation Kia Carens from 1999 to 2006 was restyled in 2002, and bumpers and lights changed, so film cut for one version does not fit the other. The length ranges from 175.2 in (4,450 mm) to 176.9 in (4,493 mm), but the side panels are similar. A full wrap takes about 66 ft (20 m) of cast film, and the sliding door tracks stay bare on every version.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Carens

A partial wrap on a Kia Carens can cover the roof, hood, and mirror caps for a smaller change. For a Carens chrome delete, the window trim and badges are covered with black film to remove the bright finish. Paint protection film (PPF) is also an option: clear film on the front end guards against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Carens: body, cut-outs and film

A Kia Carens vinyl wrap must cover its five-door van body, which measures 178.1 in (4,525 mm) long on the third generation. The tall sides and large flat panels make film installation straightforward for an experienced wrapper. The sliding side doors require careful cutting around the tracks, and the door handles and mirrors add small but precise sections.

Carens wrap ideas often start with a full color change, but the sliding doors need the film cut along the bare tracks. The third generation has no extra fog lamp cut-outs, while some second-generation trims have fog lamps in the front bumper that require openings in the film. Removing door handles and mirrors gives a cleaner edge around those parts.

If you want to know how much vinyl to wrap a Carens, the answer is about 66 ft (20 m) for standard 60-inch (1.52 m) cast film on any generation. The first generation is shorter at 175.2 in (4,450 mm) to 176.9 in (4,493 mm), and the second is 178.9 in (4,545 mm), so the difference in film is small. Chrome or patterned film adds roughly 10 ft (3 m) because pattern matching creates more waste.

Questions about wrapping a Kia Carens

How much vinyl does it take to wrap a Kia Carens?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a Kia Carens, based on the newest third-generation body. The first and second generations are within a few inches in length, so the same estimate works for all. If you use chrome or patterned film, plan for about 76–77 ft (23–23.5 m) because of extra waste.

Are the sliding doors of a Carens wrapped?

Yes, the sliding doors of a Carens are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close without rubbing. This is a standard part of a full wrap on every generation from 1999 to 2019.

Can I wrap only the hood or the roof of a Carens?

Yes, you can wrap only the hood or the roof of a Carens. A partial wrap often covers the roof, hood, and mirror caps, and a Carens chrome delete covers the window trim and badges. Paint protection film on the front end is another smaller job that leaves the rest of the van unwrapped.

Is a Carens hard to wrap?

A Carens is not especially hard to wrap, but its sliding side doors add work because the tracks must stay bare and the film is cut along them. The van is about 178 in (4.5 m) long, so the large panels are manageable but require care on the edges. Some second-generation trims have fog lamps in the front bumper, which means cut-outs in the film.