Wraps by car

Kia Carstar wrap

The Kia Carstar wrap page covers the 1999–2003 first generation minivan. A full vinyl wrap of this van takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 76 ft (23 m) for the same body.

1generations20 mof film for a full wrap

Kia Carstar, first generation, factory photo
Kia Carstar, first generation. Factory color shown.

Kia Carstar wrap colors and ideas

  • Carstar black wrap
  • Carstar white wrap
  • Carstar gray wrap
  • Carstar silver wrap
  • Carstar red wrap
  • Carstar blue wrap
  • Carstar green wrap
  • Carstar yellow wrap
  • Carstar orange wrap
  • Carstar purple wrap
  • Carstar pink wrap
  • Carstar teal wrap
  • Carstar brown wrap
  • Carstar gold wrap
  • Carstar chrome wrap
  • Carstar color shift wrap
  • Carstar carbon fiber wrap
  • Carstar camo and patterned wrap

How much vinyl to wrap a Kia Carstar

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2003van (5 doors)179.9 in (4,570 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Carstar wrap cost factors

A Carstar wrap cost depends on the amount of film and the labor needed for a 179.9 in (4,570 mm) van. A full wrap takes about 66 ft (20 m) of cast film, while chrome film takes about 76 ft (23 m). The sliding door tracks add time for cutting and finishing.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Carstar wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Carstar, first generation, factory photo
Factory color shown

1999–2003 Carstar van (first generation)

1999–2003van (5 doors)179.9 in (4,570 mm)

The first generation Kia Carstar has sliding side doors. The door tracks stay bare, so the installer cuts the film along them. The film is not wrapped into the track area because it would block the sliding movement.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Carstar

For a partial wrap on a Kia Carstar, you can cover just the roof, hood, or mirror caps. A chrome delete involves covering the window trim and badges with black film. You can also add paint protection film (PPF) to the front end as a clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Carstar: body, cut-outs and film

The Kia Carstar is a five-door van body that is 179.9 in (4,570 mm) long. Its size means a full Kia Carstar vinyl wrap uses more film than a small car would. The tall, flat sides make the film easier to apply than on a curved body.

The Carstar has sliding side doors, and their door tracks stay bare. The film is cut along the tracks so the doors can still slide. When you plan Carstar wrap ideas, you need to work around these tracks.

There is only one generation of the Kia Carstar, so how much vinyl to wrap a Carstar does not change between years. All models from 1999 to 2003 share the same van body and dimensions. A wrap shop can order the same amount of film for any Carstar.

Questions about wrapping a Kia Carstar

How much vinyl does it take to wrap a Kia Carstar?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a Kia Carstar. If you choose chrome or patterned film, you need about 76 ft (23 m).

Are the sliding doors of a Carstar wrapped?

No, the sliding door tracks of a Carstar are not wrapped. The tracks stay bare so the doors can slide, and the film is cut along them.

Can I wrap only the hood or the roof of a Carstar?

Yes, you can wrap only the hood or the roof of a Carstar. A partial wrap can also include the mirror caps, or you can do a chrome delete on the window trim and badges.

Is a Carstar hard to wrap?

A Carstar is not the hardest vehicle to wrap, but its size and sliding doors add work. The van is 179.9 in (4,570 mm) long, so you need a large work area. The sliding door tracks have to be kept bare, which means extra cutting and finishing time.