Wraps by car

Kia Ceed wrap

The Kia Ceed wrap page covers all three generations of the compact car, from the first hatchback built in 2006 to the current range that started in 2018. A full wrap of the newest Ceed body needs about 49 ft (15 m) of vinyl for the hatchback and up to 56 ft (17 m) for the wagon. We use 60-inch (1.52 m) cast film, which stretches cleanly over bumpers and the tailgate with its built-in rear glass.

3generations17 mof film for a full wrap

Kia Ceed, third generation, factory photo
Kia Ceed, third generation. Factory color shown.

Kia Ceed wrap colors and ideas

  • Ceed black wrap
  • Ceed white wrap
  • Ceed gray wrap
  • Ceed silver wrap
  • Ceed red wrap
  • Ceed blue wrap
  • Ceed green wrap
  • Ceed yellow wrap
  • Ceed orange wrap
  • Ceed purple wrap
  • Ceed pink wrap
  • Ceed teal wrap
  • Ceed brown wrap
  • Ceed gold wrap
  • Ceed chrome wrap
  • Ceed color shift wrap
  • Ceed carbon fiber wrap
  • Ceed camo and patterned wrap

How much vinyl to wrap a Kia Ceed

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowhatchback, wagon (5 doors)169.7 in (4,310 mm) to 181.1 in (4,600 mm)about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)
2012–2018hatchback, wagon (3 or 5 doors)169.7 in (4,310 mm) to 177.4 in (4,505 mm)about 56 ft (17 m) for the hatchback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
2006–2013hatchback, wagon (3 or 5 doors)166.7 in (4,235 mm) to 176.0 in (4,470 mm)about 54 ft (16.5 m) for the hatchback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Ceed wrap cost factors

Ceed wrap cost depends on the film estimate, the body style, and the number of parts that need extra labor. A wagon takes more material than a hatchback, from 56 ft (17 m) up to 59 ft (18 m) on the newest body. Chrome or patterned film can push the figure to about 72 ft (22 m) on the current Ceed because the pattern must be matched. Cut-outs for sensors, cameras, and roof rails add time, and the wrap cost reflects that extra work.

  • Film for a full wrap: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: hatchback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

Ceed wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Ceed, third generation, factory photo
Factory color shown

2018–now Ceed hatchback, wagon (third generation)

2018–nowhatchback, wagon (5 doors)169.7 in (4,310 mm) to 181.1 in (4,600 mm)

The third generation Kia Ceed runs from 2018 onward and was restyled in 2021, so bumpers and lights changed and film cut for one version does not fit the other. The restyling did not alter the body length, which stays from 169.7 in (4,310 mm) for the hatchback to 181.1 in (4,600 mm) for the wagon. A full wrap uses about 49 ft (15 m) to 56 ft (17 m) of 60-inch cast film. When you count film for this generation, check whether the car has the pre-2021 or post-2021 bumpers before ordering the kit.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Kia Ceed, second generation, factory photo
Factory color shown

2012–2018 Ceed hatchback, wagon (second generation)

2012–2018hatchback, wagon (3 or 5 doors)169.7 in (4,310 mm) to 177.4 in (4,505 mm)

The second generation Kia Ceed from 2012 to 2018 offers a hatchback and a wagon, and some trims have a panoramic glass roof that is not wrapped. The roof film ends at the roof rails, so the dark glass stays visible no matter what color the wrap is. A restyling in 2015 changed the front and rear ends, which means the bumpers need different film cuts. The wagon is longer at 177.4 in (4,505 mm), and a full wrap takes about 59 ft (18 m) of vinyl.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) for the hatchback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Kia Ceed, first generation, factory photo
Factory color shown

2006–2013 Ceed hatchback, wagon (first generation)

2006–2013hatchback, wagon (3 or 5 doors)166.7 in (4,235 mm) to 176.0 in (4,470 mm)

The first generation Kia Ceed was made from 2006 to 2013, and paint age matters on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to make sure the vinyl will not lift old paint when it is removed. The hatchback and wagon share the same tailgate with the glass, and the film ends at the glass edge. Only some trims have fog lamps in the front bumper, so cut-outs are needed on those versions.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) for the hatchback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Ceed

A partial wrap on a Kia Ceed covers the roof, hood, or mirror caps, and it is a smaller job than a full color change. Chrome delete on the Ceed means covering the bright window trim and badges with black film. Paint protection film (PPF) is a clear film that goes on the front end to protect the paint from stone chips. These partial jobs use less material than a full wrap and can be done without touching the tailgate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Ceed: body, cut-outs and film

The Kia Ceed vinyl wrap is shaped by the body style and the overall length of the car, which runs from 169.7 in (4,310 mm) to 181.1 in (4,600 mm) on the latest generation. Hatchbacks and wagons share the same front end, but the wagon adds film over the longer roof and rear pillars. The tailgate includes the rear glass, so the film stops at the glass edge instead of wrapping around it. A compact body like this one takes less material than a large SUV, yet the deep bumpers need careful stretching of the cast film.

Ceed wrap ideas start with the parts that need cut-outs or come off before the vinyl goes on. Roof rails on some trims are removed first so the film can go under them cleanly, or the film is cut along the rail base. Parking sensors and cameras in the bumpers require precise cut-outs for each sensor and lens, and fog lamps need openings in the front bumper film. On plug-in and electric versions, the charge port door is wrapped as a separate small piece.

Knowing how much vinyl to wrap a Ceed helps you plan between generations, because the film estimate changes with the body style. The second and third generations are close in size, with the hatchback staying at 169.7 in (4,310 mm) long. The first generation is shorter, from 166.7 in (4,235 mm) to 176.0 in (4,470 mm), so the wagon needs about 59 ft (18 m) of film just like the later wagon. The newest hatchback takes about 49 ft (15 m), while older hatchbacks need about 54 ft (16.5 m) to 56 ft (17 m) because of their taller rear ends.

Questions about wrapping a Kia Ceed

How much vinyl does it take to wrap a Kia Ceed?

It takes about 49 ft (15 m) of vinyl to wrap a Kia Ceed hatchback from the newest generation, and the wagon needs about 56 ft (17 m). These figures are for 60-inch (1.52 m) cast film, which is the standard width for vehicle wraps. The estimate goes up to about 72 ft (22 m) if you choose chrome or patterned film because the pattern must be matched at the seams.

Which years of the Ceed take the same film cuts?

The Ceed years that take the same film cuts are 2012 to 2014, before the second generation was restyled in 2015, and 2018 to 2020, before the third generation's restyling in 2021. A restyling changed the bumpers and lights, so the film pieces for the older style do not fit the newer style. The first generation was restyled in 2009 and 2010, which means early cars from 2006 to 2008 use different bumper film than later ones from 2009 to 2013.

Which Ceed body takes more film?

The Ceed wagon takes more film than the hatchback on every generation, because the wagon body is longer and has a taller roof. On the newest generation, the wagon needs about 56 ft (17 m) of vinyl, while the hatchback needs about 49 ft (15 m). The difference is smaller on the first generation, where the wagon takes about 59 ft (18 m) and the hatchback about 54 ft (16.5 m).

Can I wrap only the hood or the roof of a Ceed?

Yes, you can wrap only the hood or the roof of a Ceed, and that is called a partial wrap. The roof is a common partial wrap because the roof rails on some trims can be removed or the film can be cut along them. A hood wrap protects the paint and changes the look without covering the whole car. Mirror caps are another small piece that can be wrapped separately, and the film for a partial job is much less than a full wrap.