Wraps by car

Kia Enterprise wrap

The Kia Enterprise wrap page covers the full-size first-generation sedan made from 1997 to 2002. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. This page lists one generation, its body style, and the film needed to wrap the car.

1generations17 mof film for a full wrap

Kia Enterprise, first generation, factory photo
Kia Enterprise, first generation. Factory color shown.

Kia Enterprise wrap colors and ideas

  • Enterprise black wrap
  • Enterprise white wrap
  • Enterprise gray wrap
  • Enterprise silver wrap
  • Enterprise red wrap
  • Enterprise blue wrap
  • Enterprise green wrap
  • Enterprise yellow wrap
  • Enterprise orange wrap
  • Enterprise purple wrap
  • Enterprise pink wrap
  • Enterprise teal wrap
  • Enterprise brown wrap
  • Enterprise gold wrap
  • Enterprise chrome wrap
  • Enterprise color shift wrap
  • Enterprise carbon fiber wrap
  • Enterprise camo and patterned wrap

How much vinyl to wrap a Kia Enterprise

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2002sedan (4 doors)197.6 in (5,020 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Enterprise wrap cost factors

An Enterprise wrap cost depends on the size of the sedan and the film type. A full wrap of this 197.6 in (5,020 mm) car uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 13 ft (4 m) to the material. The amount of disassembly and the condition of the paint also change the work.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Enterprise wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Enterprise, first generation, factory photo
Factory color shown

1997–2002 Enterprise sedan (first generation)

1997–2002sedan (4 doors)197.6 in (5,020 mm)

The first generation Kia Enterprise ran from 1997 to 2002 as a four-door sedan. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The paint condition affects how the vinyl sticks and how the finish looks. A shop checks a small area first to see if the old paint will hold the film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Enterprise

A partial wrap on a Kia Enterprise can cover the roof, hood, or mirror caps. An Enterprise chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap of the whole sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Enterprise: body, cut-outs and film

The Kia Enterprise vinyl wrap starts with a four-door sedan that is 197.6 in (5,020 mm) long. The single body style means every wrap job follows the same panel layout. A full-size sedan has large doors, a long roof, and a long hood. That size calls for a 60-inch (1.52 m) film roll to cover panels without extra seams.

Enterprise wrap ideas for this sedan include covering the body color and leaving the chrome trim as an accent. The window trim, door handles, and badges can stay in place while the body panels receive vinyl. Cut-outs around the door handles and badges need careful knife work. The front bumper and the mirrors are removed for a clean edge.

To know how much vinyl to wrap an Enterprise, check the generation you have. This catalog covers only the first generation, produced from 1997 to 2002. The estimate of about 56 ft (17 m) of 60-inch (1.52 m) cast film fits the newest body of that generation. A chrome or patterned film on the same car takes about 69 ft (21 m).

Questions about wrapping a Kia Enterprise

How much vinyl does it take to wrap a Kia Enterprise?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Kia Enterprise. This figure is for the newest body of the first generation, a full-size sedan. The amount of film covers the body panels with a standard color change wrap. A chrome or patterned film needs about 69 ft (21 m).

Can I wrap only the hood or the roof of an Enterprise?

You can wrap only the hood or the roof of an Enterprise as a partial wrap. These panels are flat and large, which makes them straightforward to cover. Mirror caps are another small job that changes the look without a full wrap. A partial wrap uses less film and less time than wrapping the whole sedan.

Is an Enterprise hard to wrap?

An Enterprise is a large sedan, and that size adds work to a wrap. The body is 197.6 in (5,020 mm) long, so the roof and the side panels are long. The door handles, badges, and window trim need cut-outs or removal. A shop may take off the front bumper and mirrors to wrap those parts cleanly.

How many generations of the Enterprise does this page cover?

This page covers one generation of the Kia Enterprise. That generation is the first generation, produced from 1997 to 2002. The catalog lists only this generation for the Enterprise. Its body is a four-door full-size sedan.