Wraps by car

Kia Forte wrap

The Kia Forte wrap page covers all three generations of the compact sedan from 2008 to now, including the coupe and hatchback styles of earlier years. A full vinyl wrap of the newest body uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 66 ft (20 m).

3generations16 mof film for a full wrap

Kia Forte, third generation, factory photo
Kia Forte, third generation. Factory color shown.

Kia Forte wrap colors and ideas

  • Forte black wrap
  • Forte white wrap
  • Forte gray wrap
  • Forte silver wrap
  • Forte red wrap
  • Forte blue wrap
  • Forte green wrap
  • Forte yellow wrap
  • Forte orange wrap
  • Forte purple wrap
  • Forte pink wrap
  • Forte teal wrap
  • Forte brown wrap
  • Forte gold wrap
  • Forte chrome wrap
  • Forte color shift wrap
  • Forte carbon fiber wrap
  • Forte camo and patterned wrap

How much vinyl to wrap a Kia Forte

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowsedan (4 doors)182.7 in (4,640 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2013–2018coupe, hatchback, sedan (2 or 4 or 5 doors)171.3 in (4,351 mm) to 179.5 in (4,560 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
2008–2013coupe, hatchback, sedan (2 or 4 or 5 doors)170.9 in (4,340 mm) to 178.3 in (4,530 mm)about 49 ft (15 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Forte wrap cost factors

The Forte wrap cost depends on the amount of film, the body style, and the condition of the paint. A full wrap of the newest sedan uses about 52 ft (16 m) of material, while older coupes may use as little as 49 ft (15 m). Chrome or patterned film increases the footage to about 66 ft (20 m), which raises the cost. Older cars may need paint correction before wrapping, adding labor time.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

Forte wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Forte, third generation, factory photo
Factory color shown

2018–now Forte sedan (third generation)

2018–nowsedan (4 doors)182.7 in (4,640 mm)

The third generation Kia Forte was restyled in 2021, and the bumpers and lights changed, so film cut for one version does not fit the other. The restyling means a pre-2021 bumper template will not match a 2021 or later car. Installers must use the correct pattern for the production year of the vehicle. This generation is only available as a sedan with four doors.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Kia Forte, second generation, factory photo
Factory color shown

2013–2018 Forte coupe, hatchback, sedan (second generation)

2013–2018coupe, hatchback, sedan (2 or 4 or 5 doors)171.3 in (4,351 mm) to 179.5 in (4,560 mm)

The second generation Kia Forte came in coupe, hatchback, and sedan body styles, and the style decides the panel plan and the film amount. The coupe needs about 49 ft (15 m) of cast film, while the hatchback needs about 51 ft (15.5 m). The sedan falls between the two, and all use 60-inch (1.52 m) film. This generation was restyled in 2016, but the body styles remained the same.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Kia Forte, first generation, factory photo
Factory color shown

2008–2013 Forte coupe, hatchback, sedan (first generation)

2008–2013coupe, hatchback, sedan (2 or 4 or 5 doors)170.9 in (4,340 mm) to 178.3 in (4,530 mm)

Paint age is a key factor on a first generation Kia Forte because on a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The first generation ran from 2008 to 2013, so the paint has had time to fade or chip. Repainted panels can have uneven adhesion, and a test spot helps check whether the film will stick properly. The coupe and hatchback both have a tailgate with the rear glass in it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Forte

A Forte chrome delete covers the window trim and badges with black film for a darker look. A partial wrap can be just the roof, hood, or mirror caps, which uses much less material than a full wrap. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These smaller jobs are a way to change the car's appearance without committing to a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Forte: body, cut-outs and film

A Kia Forte vinyl wrap must account for the car's compact size and three body styles: sedan, coupe, and hatchback. The newest sedan is 182.7 in (4,640 mm) long, while earlier models range from 170.9 in (4,340 mm) to 179.5 in (4,560 mm). The longer body of the third generation means more film per panel than on the second generation. The hatchback and coupe have a tailgate or trunk lid that changes how the rear is wrapped.

Forte wrap ideas often start with the areas that need extra attention during installation. On the second generation, every trim has fog lamps in the front bumper, so the film must be cut out around them. The hatchback and coupe have a tailgate with the rear glass in it, and the film ends at the edge of the glass. Door handles, mirrors, and badges also require cut-outs or removal for a clean finish.

How much vinyl to wrap a Forte depends on which generation and body style you have. The first generation sedan needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, the most of that generation, while the coupe needs only about 49 ft (15 m). The second generation ranges from 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the hatchback. The third generation sedan is consistent at about 52 ft (16 m) because of its single body style.

Questions about wrapping a Kia Forte

How much vinyl does it take to wrap a Kia Forte?

A Kia Forte full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 66 ft (20 m). The first and second generation models use between 49 ft (15 m) and 56 ft (17 m) depending on body style.

Which years of the Forte take the same film cuts?

The same film cuts fit a third generation Forte from 2018 to 2020, and a different set fits from 2021 onward because of the restyling. For the second generation, 2013 to 2015 models share cuts, and 2016 to 2018 models share cuts after the restyling in 2016. First generation models from 2008 to 2013 use one set of cuts for each body style.

Can I wrap only the hood or the roof of a Forte?

Yes, you can wrap only the hood or the roof of a Forte, and these are common partial wrap jobs along with mirror caps. A chrome delete for the window trim and badges is another way to wrap only part of the car. Clear paint protection film on the front end is also a partial wrap option.

Is a Forte hard to wrap?

A Forte is not especially hard to wrap, but some details add work. The second generation has fog lamps in the front bumper on every trim, so cut-outs are needed in the bumper film. The hatchback and coupe have a tailgate with the rear glass in it, so the film ends at the edge of the glass. Its compact size means fewer panels, but the front and rear bumpers have many curves.