Wraps by car

Kia Picanto wrap

This page covers a vinyl wrap for the Kia Picanto, a mini hatchback built in three generations since 2003. The newest Picanto is the third generation from 2017 until now. A full wrap of that body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

3generations14.5 mof film for a full wrap

Kia Picanto, third generation, factory photo
Kia Picanto, third generation. Factory color shown.

Kia Picanto wrap colors and ideas

  • Picanto black wrap
  • Picanto white wrap
  • Picanto gray wrap
  • Picanto silver wrap
  • Picanto red wrap
  • Picanto blue wrap
  • Picanto green wrap
  • Picanto yellow wrap
  • Picanto orange wrap
  • Picanto purple wrap
  • Picanto pink wrap
  • Picanto teal wrap
  • Picanto brown wrap
  • Picanto gold wrap
  • Picanto chrome wrap
  • Picanto color shift wrap
  • Picanto carbon fiber wrap
  • Picanto camo and patterned wrap

How much vinyl to wrap a Kia Picanto

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowhatchback (5 doors)141.5 in (3,595 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2011–2017hatchback (3 or 5 doors)141.5 in (3,595 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2003–2011hatchback (5 doors)137.6 in (3,495 mm) to 139.2 in (3,535 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Picanto wrap cost factors

Picanto wrap cost depends on the film type and the body generation, since the first and second generations use about 46 ft (14 m) and the third uses about 48 ft (14.5 m). Chrome or patterned film raises the amount to about 54 ft (16.5 m) for any generation. A wrap with many cut-outs for sensors, cameras, or a sunroof takes more labor. The cost also changes with the condition of the paint and how many small parts must be removed.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2020, 2023: bumpers and lights differ between the versions, and so do the film cuts.

Picanto wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Picanto, third generation, factory photo
Factory color shown

2017–now Picanto hatchback (third generation)

2017–nowhatchback (5 doors)141.5 in (3,595 mm)

The third generation Kia Picanto can have a panoramic glass roof on some trims. That glass is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails and the glass is left untouched. On trims with a sunroof, the roof film is cut around the opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Kia Picanto, second generation, factory photo
Factory color shown

2011–2017 Picanto hatchback (second generation)

2011–2017hatchback (3 or 5 doors)141.5 in (3,595 mm)

The second generation Kia Picanto was restyled in 2015, and the restyling changed the bumpers and lights. Film cut for one version does not fit the other, so a wrap installer needs to know the production year. The body length stayed at 141.5 in (3,595 mm), but the front and rear shapes differ. A wrap kit for a 2014 car will not match a 2016 car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Kia Picanto, first generation, factory photo
Factory color shown

2003–2011 Picanto hatchback (first generation)

2003–2011hatchback (5 doors)137.6 in (3,495 mm) to 139.2 in (3,535 mm)

The first generation Kia Picanto ran from 2003 to 2011, and paint age matters for a wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A test spot shows whether the paint will hold the film without lifting. The wrap itself takes about 46 ft (14 m) of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Picanto

A partial wrap on a Kia Picanto can cover the hood, mirror caps, or roof on cars without the glass panel. Picanto chrome delete covers window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These smaller jobs work on any generation and can be combined.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Picanto: body, cut-outs and film

A Kia Picanto vinyl wrap covers a small five-door hatchback, and the film estimate is based on the 141.5 in (3,595 mm) body length. The short body keeps the wrap area compact, so it uses less film than larger cars. The hatchback shape means the wrap runs over five doors and the tailgate as separate panels. The roof on this body is a single panel up to the roof rails.

Picanto wrap ideas start with the tailgate, where the rear glass sits in the panel and the film ends at the edge of the glass. Some trims have a panoramic glass roof, and glass is not wrapped, so the film ends at the roof rails. Some trims have a sunroof, and the roof film is then cut around its opening. Some trims have parking sensors or cameras in the body, and the film is cut around each sensor or lens.

For how much vinyl to wrap a Picanto, the third generation from 2017 uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The second generation from 2011 to 2017 is slightly smaller at about 46 ft (14 m) for a full wrap. The first generation from 2003 to 2011 is also about 46 ft (14 m), with a body length of 137.6 in (3,495 mm) to 139.2 in (3,535 mm). If you use chrome or patterned film, add about 8 ft (2.5 m) to each estimate.

Questions about wrapping a Kia Picanto

How much vinyl does it take to wrap a Kia Picanto?

Yes, a full wrap of the newest Kia Picanto takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The third generation from 2017 to now uses this amount for a standard color change wrap. Chrome or patterned film raises the need to about 54 ft (16.5 m). The first and second generations use slightly less, about 46 ft (14 m).

Can the roof of a Picanto be wrapped?

Yes, the roof of a Picanto can be wrapped on every generation. On cars with a panoramic glass roof, the glass is not wrapped, so the roof stays dark whatever the color of the film. On cars with a sunroof, the film is cut around the opening. A plain metal roof is wrapped as one panel.

Which years of the Picanto take the same film cuts?

For the Kia Picanto, film cuts match within each generation but not across the restyling. The first generation from 2003 to 2011 is one cut set, with a restyling in 2010. The second generation from 2011 to 2017 has two cuts because of the 2015 restyling. The third generation from 2017 to now has restyling in 2020 and 2023, so cuts differ across those years.

Can I wrap only the hood or the roof of a Picanto?

Yes, you can wrap only the hood or the roof of a Picanto. A partial wrap can cover the hood, mirror caps, or roof on cars without the glass panel. You can also choose a chrome delete for window trim, decorative moldings, and badges. These smaller jobs are a way to change the look without a full wrap.