Wraps by car

Kia Potentia wrap

The Kia Potentia wrap page covers the first generation produced from 1992 to 2001. This full-size sedan measures 193.9 in (4,925 mm) in length. A full vinyl wrap of the Potentia requires about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 67 ft (20.5 m).

1generations16.5 mof film for a full wrap

Kia Potentia, first generation, factory photo
Kia Potentia, first generation. Factory color shown.

Kia Potentia wrap colors and ideas

  • Potentia black wrap
  • Potentia white wrap
  • Potentia gray wrap
  • Potentia silver wrap
  • Potentia red wrap
  • Potentia blue wrap
  • Potentia green wrap
  • Potentia yellow wrap
  • Potentia orange wrap
  • Potentia purple wrap
  • Potentia pink wrap
  • Potentia teal wrap
  • Potentia brown wrap
  • Potentia gold wrap
  • Potentia chrome wrap
  • Potentia color shift wrap
  • Potentia carbon fiber wrap
  • Potentia camo and patterned wrap

How much vinyl to wrap a Kia Potentia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–2001sedan (4 doors)193.9 in (4,925 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Potentia wrap cost factors

A Potentia wrap cost depends on how much film the job uses and how much labor the body needs. A full wrap of this 193.9 in (4,925 mm) sedan takes about 54 ft (16.5 m) of film, while chrome or patterned film takes about 67 ft (20.5 m). Paint condition matters more on a 1992 to 2001 car because old finish can need correction before wrapping. The complexity of the front bumper and the door count also change the labor for this full-size Kia.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Potentia wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Potentia, first generation, factory photo
Factory color shown

1992–2001 Potentia sedan (first generation)

1992–2001sedan (4 doors)193.9 in (4,925 mm)

The first generation Kia Potentia from 1992 to 2001 often has paint that is original or repainted. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A test spot shows whether the film will stick well to the old paint. That step is important because repainted areas can lift the wrap later.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Potentia

A partial wrap on a Potentia covers the roof, hood, or mirror caps instead of the whole body. A chrome delete on the Kia Potentia means wrapping the window trim and badges with black film. Paint protection film (PPF) is another option: a clear film on the front end guards against stone chips. These smaller jobs use much less film than a full 54 ft (16.5 m) wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Potentia: body, cut-outs and film

A Kia Potentia vinyl wrap on this full-size sedan uses more film than a compact car. The four-door body sits at 193.9 in (4,925 mm) long, so the roof, hood, and trunk panels are large. The front and rear bumpers add substantial surface area and require careful stretching. A full wrap on this body means working with long, flat panels that show every imperfection.

Potentia wrap ideas start with removing door handles, mirrors, and trim for clean edges. The window trim and badges need cut-outs or removal for a seamless finish. The front grille and bumper are complex shapes that take time to wrap properly. Taking off the front and rear lights gives better access to panel edges.

Knowing how much vinyl to wrap a Potentia helps before starting the project. This page covers only the first generation from 1992 to 2001, so the dimensions stay the same. A stock full wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 67 ft (20.5 m).

Questions about wrapping a Kia Potentia

How much vinyl does it take to wrap a Kia Potentia?

A Kia Potentia takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the amount rises to about 67 ft (20.5 m).

Can I wrap only the hood or the roof of a Potentia?

Yes, you can wrap only the hood or the roof of a Potentia. A partial wrap on this car often covers the roof, hood, or mirror caps instead of the whole body.

Is a Potentia hard to wrap?

A Potentia is not the easiest car to wrap because it is a long full-size sedan. At 193.9 in (4,925 mm), the large roof and hood require careful handling, and the front bumper has complex curves. The age of a 1992 to 2001 model can mean old paint that needs testing before film goes on.

How many generations of the Potentia does this page cover?

This page covers one generation of the Kia Potentia. The information here is for the first generation produced from 1992 to 2001.