Wraps by car

Kia Retona wrap

The Kia Retona wrap page covers the first generation SUV from 1998 to 2003. This one generation includes a restyling in 2000 with new bumpers and lights. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

1generations16.5 mof film for a full wrap

Kia Retona, first generation, factory photo
Kia Retona, first generation. Factory color shown.

Kia Retona wrap colors and ideas

  • Retona black wrap
  • Retona white wrap
  • Retona gray wrap
  • Retona silver wrap
  • Retona red wrap
  • Retona blue wrap
  • Retona green wrap
  • Retona yellow wrap
  • Retona orange wrap
  • Retona purple wrap
  • Retona pink wrap
  • Retona teal wrap
  • Retona brown wrap
  • Retona gold wrap
  • Retona chrome wrap
  • Retona color shift wrap
  • Retona carbon fiber wrap
  • Retona camo and patterned wrap

How much vinyl to wrap a Kia Retona

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003SUV (3 doors)157.5 in (4,000 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Retona wrap cost factors

Retona wrap cost depends on the film type and the amount of surface area. A full wrap uses about 54 ft (16.5 m) of cast film, or about 67 ft (20.5 m) for chrome or patterned film. The tall body, 72.2 in (1,835 mm), adds labor for roof access, and the restyling difference in bumpers and lights can require custom cutting.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.
  • Restyled in 2000: bumpers and lights differ between the versions, and so do the film cuts.

Retona wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Retona, first generation, factory photo
Factory color shown

1998–2003 Retona SUV (first generation)

1998–2003SUV (3 doors)157.5 in (4,000 mm)

The first generation Kia Retona was built from 1998 to 2003 with a restyling in 2000. That restyling changed the bumpers and lights, so film cut for one version does not fit the other. When ordering a pre-cut kit, check whether it is for the early or late front end.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Retona

A partial wrap on a Kia Retona can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Retona: body, cut-outs and film

A Kia Retona vinyl wrap has to cover a compact three-door SUV body. The vehicle is 157.5 in (4,000 mm) long and 72.2 in (1,835 mm) tall, with large flat side panels. These dimensions mean a full wrap uses less film than a larger SUV but still needs careful handling of the tall body.

Retona wrap ideas should account for the tailgate with rear glass. The film ends at the edge of the glass, so the tailgate needs a precise cut around the window. The two long side doors are each covered with one large piece of film, and the roof is wrapped from a platform due to the height.

To work out how much vinyl to wrap a Retona, compare the 1998 to 2000 body with the 2000 to 2003 restyling. The front and rear bumpers and lights changed in 2000, so the film cuts for those areas differ between the versions. For the rest of the body, the panels are the same, so a full wrap estimate stays around 54 ft (16.5 m).

Questions about wrapping a Kia Retona

How much vinyl does it take to wrap a Kia Retona?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap of a Kia Retona. This estimate is for the newest body from 2000 to 2003. Chrome or patterned film would increase the amount to about 67 ft (20.5 m).

Which years of the Retona take the same film cuts?

The years that take the same film cuts are 1998–1999 and 2000–2003. The restyling in 2000 changed the bumpers and lights, so the front and rear cuts are not interchangeable between those periods. The side and roof panels are the same across all years.

Can I wrap only the hood or the roof of a Retona?

Yes, you can wrap only the hood or the roof of a Retona. The roof wrap is done from a platform because the body is 72.2 in (1,835 mm) tall. Mirror caps are another small job that can be done on their own.

Is a Retona hard to wrap?

A Retona is not the easiest wrap because of a few specific points. The tailgate has rear glass in it, so the film must end at the edge of the glass. The two long side doors need one large piece each, and the tall body means the roof is wrapped from a platform.