Wraps by car

Kia Sedona wrap

The Kia Sedona wrap guide covers all three generations of this minivan, from 1998 until today. A full vinyl wrap of the newest body takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. The first and second generations need slightly different amounts, as listed below.

3generations23.5 mof film for a full wrap

Kia Sedona, third generation, factory photo
Kia Sedona, third generation. Factory color shown.

Kia Sedona wrap colors and ideas

  • Sedona black wrap
  • Sedona white wrap
  • Sedona gray wrap
  • Sedona silver wrap
  • Sedona red wrap
  • Sedona blue wrap
  • Sedona green wrap
  • Sedona yellow wrap
  • Sedona orange wrap
  • Sedona purple wrap
  • Sedona pink wrap
  • Sedona teal wrap
  • Sedona brown wrap
  • Sedona gold wrap
  • Sedona chrome wrap
  • Sedona color shift wrap
  • Sedona carbon fiber wrap
  • Sedona camo and patterned wrap

How much vinyl to wrap a Kia Sedona

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowvan (5 doors)201.4 in (5,116 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
2005–2014van (5 doors)189.4 in (4,810 mm) to 202.0 in (5,130 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
1998–2006van (5 doors)192.5 in (4,890 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

Sedona wrap cost factors

Sedona wrap cost depends on the size of the van, the chosen film, and how much of the body is covered. A full wrap of the newest generation uses about 77 ft (23.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned films need about 90 ft (27.5 m). The first generation takes a bit less film, and a second-generation wrap falls between those two. Partial wraps and paint protection film are smaller jobs with lower material needs.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Sedona wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Sedona, third generation, factory photo
Factory color shown

2014–now Sedona van (third generation)

2014–nowvan (5 doors)201.4 in (5,116 mm)

The third-generation Kia Sedona, built from 2014 onward, has sliding side doors with tracks that stay bare. The film is cut along those tracks so the doors can open and close freely. This generation is the longest of the three, which means more film on the lower body. A full wrap of this body takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Kia Sedona, second generation, factory photo
Factory color shown

2005–2014 Sedona van (second generation)

2005–2014van (5 doors)189.4 in (4,810 mm) to 202.0 in (5,130 mm)

The second-generation Kia Sedona was restyled in 2010, and bumpers and lights changed. Film cut for a 2005–2009 version does not fit a 2010–2014 version, and the other way around. The body length ranges from 189.4 in (4,810 mm) to 202.0 in (5,130 mm), so measure the exact van first. This generation also has a tall body, so the roof is wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.5 in (1,815 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Kia Sedona, first generation, factory photo
Factory color shown

1998–2006 Sedona van (first generation)

1998–2006van (5 doors)192.5 in (4,890 mm)

The first-generation Kia Sedona, made from 1998 to 2006, often has older paint and may have repainted panels. A test spot of film checks that the paint will hold the adhesive before a full wrap. This van is 192.5 in (4,890 mm) long and needs about 72 ft (22 m) of 60-inch (1.52 m) cast film. The sliding side doors still have tracks that stay bare.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on a Sedona

A partial wrap on a Kia Sedona can cover the roof, hood, or mirror caps, and it uses much less film than a full wrap. Sedona chrome delete covers the window trim and badges with black film to change the bright parts. Paint protection film (PPF) is a clear film placed on the front end to shield it from stone chips. These smaller jobs still need the same care around the sliding door tracks.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Sedona: body, cut-outs and film

A Kia Sedona vinyl wrap deals with a large five-door van body, which means long panels and a high roof. The newest generation measures 201.4 in (5,116 mm) long, while the first generation is 192.5 in (4,890 mm). These dimensions add up to a lot of film and a full day or more of work. The boxy shape helps installation but demands careful planning of seams.

Sedona wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. The tailgate, hood, and front bumper are wrapped as separate pieces. On the second generation, the tall body means the roof is wrapped from a platform. Badges and door handles come off before film is applied.

How much vinyl to wrap a Sedona depends on the generation, and the film estimates differ by a few meters. The newest body needs about 77 ft (23.5 m) of 60-inch (1.52 m) cast film, while the second generation needs about 79 ft (24 m). The first generation is the smallest at about 72 ft (22 m). Chrome or patterned film requires more material because the pattern must be matched.

Questions about wrapping a Kia Sedona

How much vinyl does it take to wrap a Kia Sedona?

About 77 ft (23.5 m) of 60-inch (1.52 m) cast film is needed to wrap the newest Kia Sedona. That estimate is for a full color change wrap with standard cast film. Chrome or patterned film for the same body takes about 90 ft (27.5 m). The older generations need slightly different amounts.

Are the sliding doors of a Sedona wrapped?

Yes, the sliding doors of a Sedona are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still slide. This is a standard part of a full wrap on every generation of the Sedona.

Can I wrap only the hood or the roof of a Sedona?

Yes, you can wrap only the hood or the roof of a Sedona. A partial wrap can also cover the mirror caps, and a chrome delete covers window trim and badges. Paint protection film on the front end is another partial option.

Is a Sedona hard to wrap?

A Kia Sedona is not especially hard to wrap, but it has a few extra steps. The sliding door tracks must stay bare, so the film is cut along them. The second generation has a tall body, so the roof is wrapped from a platform. The newest body is over 200 inches long, which adds time to every panel.