Wraps by car

Kia Shuma wrap

The Kia Shuma wrap page covers the first and second generations of this compact liftback. We explain how much vinyl wrap a full body needs for each generation. The newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

2generations15.5 mof film for a full wrap

Kia Shuma, second generation, factory photo
Kia Shuma, second generation. Factory color shown.

Kia Shuma wrap colors and ideas

  • Shuma black wrap
  • Shuma white wrap
  • Shuma gray wrap
  • Shuma silver wrap
  • Shuma red wrap
  • Shuma blue wrap
  • Shuma green wrap
  • Shuma yellow wrap
  • Shuma orange wrap
  • Shuma purple wrap
  • Shuma pink wrap
  • Shuma teal wrap
  • Shuma brown wrap
  • Shuma gold wrap
  • Shuma chrome wrap
  • Shuma color shift wrap
  • Shuma carbon fiber wrap
  • Shuma camo and patterned wrap

How much vinyl to wrap a Kia Shuma

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2004liftback (5 doors)178.1 in (4,525 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1997–2001liftback (5 doors)176.2 in (4,475 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Shuma wrap cost factors

Shuma wrap cost changes with the amount of film, the film type, and the labor on this car. A full wrap on a second generation uses about 51 ft (15.5 m) of cast film, and chrome or patterned film pushes that to about 64 ft (19.5 m). The first generation is 176.2 in (4,475 mm) long and takes a similar base amount. The tailgate glass edge and the bumper openings add installer time.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Shuma wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Shuma, second generation, factory photo
Factory color shown

2001–2004 Shuma liftback (second generation)

2001–2004liftback (5 doors)178.1 in (4,525 mm)

The second generation Kia Shuma was built from 2001 to 2004 as a five-door liftback. Paint age matters on a car of these years, because panels may be original or repainted. A test spot with the film on each panel comes before a full wrap. This checks adhesion and shows any hidden paint lifting.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Kia Shuma, first generation, factory photo
Factory color shown

1997–2001 Shuma liftback (first generation)

1997–2001liftback (5 doors)176.2 in (4,475 mm)

The first generation Kia Shuma was built from 1997 to 2001 with the same five-door liftback body. At 176.2 in (4,475 mm) long, it is slightly shorter than the later generation. That size and the single body style mean the film amount is about 51 ft (15.5 m) for a standard color change. You still plan each panel separately because the tailgate glass edge is a fixed cut line.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Shuma

Partial wrap on a Kia Shuma covers the roof, hood, or mirror caps. Shuma chrome delete covers the window trim and badges with black film. Paint protection film (PPF) goes on the front end as a clear layer. These jobs use less film than a full wrap and change only a few panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Shuma: body, cut-outs and film

A Kia Shuma vinyl wrap covers a compact liftback with one tailgate and four side doors. The car is 178.1 in (4,525 mm) long in the second generation and 176.2 in (4,475 mm) in the first. These dimensions mean a full wrap uses the same 51 ft (15.5 m) base film on either generation.

Shuma wrap ideas start with the body lines and the parts that need extra care. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Door handles, mirrors, and badges usually come off for a clean install. The front and rear bumpers need inlays or relief cuts around fog light openings.

How much vinyl to wrap a Shuma depends on the generation and the film finish. A second generation takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the first takes the same base amount. For chrome or patterned film the second generation needs about 64 ft (19.5 m) and the first about 62 ft (19 m). You count extra material for the roof, mirror caps, and any repaired panels.

Questions about wrapping a Kia Shuma

How much vinyl does it take to wrap a Kia Shuma?

A Kia Shuma full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the newest body. Chrome or patterned film raises the amount to about 64 ft (19.5 m). These figures cover all exterior panels from the second generation.

Can I wrap only the hood or the roof of a Shuma?

Yes, you can wrap only the hood or the roof of a Shuma. A partial wrap covers the roof, hood, or mirror caps as separate jobs. The installer measures those panels and cuts film to fit each one.

Is a Shuma hard to wrap?

A Shuma is not the hardest car to wrap, but a few parts add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. At 178.1 in (4,525 mm) long, the second generation body takes two people to handle large side panels.

How many generations of the Shuma does this page cover?

This page covers two generations of the Kia Shuma: the first from 1997 to 2001 and the second from 2001 to 2004. Both are five-door liftbacks and take about the same base film amount for a full wrap.