Wraps by car

Kia Towner wrap

A Kia Towner wrap covers this compact van with vinyl wrap on every painted panel. The catalog lists one generation of the Kia Towner, produced from 1999 to 2002. A full wrap of the newest body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Kia Towner, first generation, factory photo
Kia Towner, first generation. Factory color shown.

Kia Towner wrap colors and ideas

  • Towner black wrap
  • Towner white wrap
  • Towner gray wrap
  • Towner silver wrap
  • Towner red wrap
  • Towner blue wrap
  • Towner green wrap
  • Towner yellow wrap
  • Towner orange wrap
  • Towner purple wrap
  • Towner pink wrap
  • Towner teal wrap
  • Towner brown wrap
  • Towner gold wrap
  • Towner chrome wrap
  • Towner color shift wrap
  • Towner carbon fiber wrap
  • Towner camo and patterned wrap

How much vinyl to wrap a Kia Towner

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2002van (5 doors)132.3 in (3,360 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Towner wrap cost factors

The Towner wrap cost depends on the size of the van and the amount of film it needs. A full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film adds about 6 ft (2 m) more. The tall roof and the sliding door tracks also change the labor time.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Towner wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Towner, first generation, factory photo
Factory color shown

1999–2002 Towner van (first generation)

1999–2002van (5 doors)132.3 in (3,360 mm)

The first generation Kia Towner wrap is built around the sliding side doors of the 1999–2002 van. The door tracks stay bare, so the film is cut along them and the tracks decide where the cut lines go. This keeps the doors working while the wrap is on the rest of the body.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Towner

A partial wrap on a Kia Towner can cover the roof, the hood, or the mirror caps. A Towner chrome delete covers the window trim and badges with black film. Paint protection film (PPF) in clear film can be put on the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Towner: body, cut-outs and film

The Kia Towner vinyl wrap has to follow a tall, boxy body that measures 132.3 in (3,360 mm) long and 73.6 in (1,870 mm) high. The van style has five doors, including two sliding side doors that need precise film cuts. A color change wrap on this minivan uses large panels on the sides and roof.

Towner wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. The tall body means the roof is wrapped from a platform, which adds a step to the job. You can keep the original color on the tracks and still get a clean look.

To know how much vinyl to wrap a Towner, compare the single generation in the catalog. The first generation, from 1999 to 2002, has the same van body and five doors. After 2002 the Kia Towner is not listed, so no later body changes affect the film estimate.

Questions about wrapping a Kia Towner

How much vinyl does it take to wrap a Kia Towner?

A Kia Towner takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the estimate is about 57 ft (17.5 m).

Are the sliding doors of a Towner wrapped?

Yes, the sliding doors of a Kia Towner are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can slide without catching the vinyl.

Can I wrap only the hood or the roof of a Towner?

Yes, you can wrap only the hood or the roof of a Kia Towner as a partial wrap. The hood is a single panel, and the roof is reached from a platform on this tall van.

Is a Towner hard to wrap?

A Kia Towner is not the hardest van to wrap, but two things add work. The sliding door tracks must stay bare, so the film is cut along them, and the tall roof is wrapped from a platform.