Wraps by car

Kia Venga wrap

The Kia Venga wrap page covers the first generation of this compact minivan in full. This generation ran from 2009 to 2018 and came as a five-door hatchback. A full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Kia Venga, first generation, factory photo
Kia Venga, first generation. Factory color shown.

Kia Venga wrap colors and ideas

  • Venga black wrap
  • Venga white wrap
  • Venga gray wrap
  • Venga silver wrap
  • Venga red wrap
  • Venga blue wrap
  • Venga green wrap
  • Venga yellow wrap
  • Venga orange wrap
  • Venga purple wrap
  • Venga pink wrap
  • Venga teal wrap
  • Venga brown wrap
  • Venga gold wrap
  • Venga chrome wrap
  • Venga color shift wrap
  • Venga carbon fiber wrap
  • Venga camo and patterned wrap

How much vinyl to wrap a Kia Venga

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2018hatchback (5 doors)160.2 in (4,068 mm) to 160.4 in (4,075 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Venga wrap cost factors

Venga wrap cost depends on the size of the car and the parts on your trim. The length of 160.2 in (4,068 mm) to 160.4 in (4,075 mm) sets the base film amount. A panoramic glass roof or sunroof reduces the roof vinyl area, while a chrome delete or patterned film adds material.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

Venga wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Venga, first generation, factory photo
Factory color shown

2009–2018 Venga hatchback (first generation)

2009–2018hatchback (5 doors)160.2 in (4,068 mm) to 160.4 in (4,075 mm)

The first generation Kia Venga has a glass roof on some trims that is not wrapped. The roof stays dark whatever the color of the film, which can change the look of the car. Installers leave the glass panel exposed and cut the film at its edges.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Venga

A Venga chrome delete or partial wrap targets only part of the car instead of the full body. You can wrap the hood, mirror caps, or roof on cars without the glass panel. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Venga: body, cut-outs and film

The Kia Venga vinyl wrap depends on the hatchback body and its compact size. The car measures 160.2 in (4,068 mm) to 160.4 in (4,075 mm) long, which makes it a smaller job than a full-size van. The five doors and the tall roof add film area, but the short length keeps the total around 52 ft (16 m).

Venga wrap ideas need to account for the parts that require cut-outs or removal. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Some trims have a panoramic glass roof, a sunroof, parking sensors, cameras, or fog lamps, and the film is cut around each of these.

How much vinyl to wrap a Venga stays the same between the years because there is one generation. The body dimensions changed only slightly after the 2014 restyling, from 160.2 in (4,068 mm) to 160.4 in (4,075 mm). The film estimate for a full wrap is about 52 ft (16 m) for the newest body.

Questions about wrapping a Kia Venga

How much vinyl does it take to wrap a Kia Venga?

A full wrap of a Kia Venga takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate goes up to about 62 ft (19 m). The exact amount depends on how much waste is created by the cuts.

Can the roof of a Venga be wrapped?

Yes, the roof of a Venga can be wrapped on cars without the panoramic glass roof or sunroof. On those trims, the roof panel is a good surface for vinyl. If your car has a glass roof, that part is not wrapped and the film ends at the edge of the glass.

Which years of the Venga take the same film cuts?

The years 2009 to 2018 of the Venga take the same film cuts because there is one generation. The car was restyled in 2014, but the body dimensions changed only slightly. Therefore, the same wrap patterns can be used for all years with minor adjustments.

Can I wrap only the hood or the roof of a Venga?

Yes, you can wrap only the hood or the roof of a Venga. A partial wrap can include the hood, mirror caps, or roof on cars without the glass panel. You can also choose a chrome delete for the window trim and badges or paint protection film on the front end.