Wraps by car

Kia Visto wrap

The Kia Visto wrap page covers the first generation hatchback built from 1999 to 2004. A full vinyl wrap of this mini car takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 52 ft (16 m).

1generations14 mof film for a full wrap

Kia Visto, first generation, factory photo
Kia Visto, first generation. Factory color shown.

Kia Visto wrap colors and ideas

  • Visto black wrap
  • Visto white wrap
  • Visto gray wrap
  • Visto silver wrap
  • Visto red wrap
  • Visto blue wrap
  • Visto green wrap
  • Visto yellow wrap
  • Visto orange wrap
  • Visto purple wrap
  • Visto pink wrap
  • Visto teal wrap
  • Visto brown wrap
  • Visto gold wrap
  • Visto chrome wrap
  • Visto color shift wrap
  • Visto carbon fiber wrap
  • Visto camo and patterned wrap

How much vinyl to wrap a Kia Visto

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2004hatchback (5 doors)137.6 in (3,495 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Visto wrap cost factors

The Visto wrap cost depends on the film you choose and how much of the car you cover. The mini hatchback takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full color change wrap. A chrome delete or a partial wrap on the roof and hood uses less material but adds time for detailed cutting. The condition of the 1999–2004 paint also affects the preparation work before the vinyl goes on.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Visto wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Visto, first generation, factory photo
Factory color shown

1999–2004 Visto hatchback (first generation)

1999–2004hatchback (5 doors)137.6 in (3,495 mm)

On a 1999–2004 Visto, the paint may be original or repainted after years on the road. Before a full wrap, the installer does a test spot on a panel to check how the film adheres to the surface. If the paint is weak or flaking, the vinyl can lift it when the film is repositioned. A test spot shows whether the car needs more prep work before the wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Visto

A partial wrap on the Visto works well for the roof, hood or mirror caps when you want a smaller change. A chrome delete covers the window trim and badges with black film to remove the bright metal look. Paint protection film (PPF) is a clear film that guards the front end from stone chips and scratches. Each of these jobs uses less material than a full wrap but still needs the same clean edges.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kia Visto: body, cut-outs and film

A Kia Visto vinyl wrap fits one body style: the five-door hatchback that measures 137.6 in (3,495 mm) from bumper to bumper. Its small size keeps the wrap area compact, so one installer can manage the panels without a second pair of hands. The five doors add extra edges and handles compared with a three-door body. The roof and rear pillars are short, which means fewer long stretches of film on the upper body.

Visto wrap ideas often start with the tailgate because the rear glass is set into it. The film must end cleanly at the edge of the glass, so the installer cuts the vinyl along that line. The door handles, mirrors and badges are removed for a cleaner edge before the film is applied. The bumper corners and the fuel filler flap also need careful trimming around their shapes.

For someone who counts film, there is only one generation of the Visto in the catalog, produced from 1999 to 2004. The hatchback body did not change size during those years, so the film estimate stays the same for every car on this page. A full wrap of the 137.6 in (3,495 mm) body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you plan a chrome delete or a patterned wrap, order about 52 ft (16 m) instead.

Questions about wrapping a Kia Visto

How much vinyl does it take to wrap a Kia Visto?

A full vinyl wrap on a Kia Visto takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 52 ft (16 m). These figures cover the first generation hatchback from 1999 to 2004.

Can I wrap only the hood or the roof of a Visto?

Yes, you can wrap only the hood or the roof of a Visto as a partial wrap. The same partial wrap can also cover the mirror caps for a small accent. A chrome delete on the window trim and badges is another focused option.

Is a Visto hard to wrap?

A Visto is not hard to wrap, but the tailgate with the rear glass in it adds a step. The film ends at the edge of the glass, so the installer must cut that line precisely. The car's length of 137.6 in (3,495 mm) keeps the panels small and easy to handle.

How many generations of the Visto does this page cover?

This page covers one generation of the Kia Visto. That first generation was built from 1999 to 2004 as a five-door hatchback. The catalog does not list any other generations.