Wraps by car

Mazda 1000 wrap

Mazda 1000 wrap options cover the first generation sedan produced from 1967 to 1977. This page includes vinyl wrap information for the single generation in the catalog. A full wrap of the newest body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 49 ft (15 m).

1generations12.5 mof film for a full wrap

Mazda 1000, first generation, factory photo
Mazda 1000, first generation. Factory color shown.

Mazda 1000 wrap colors and ideas

  • Mazda 1000 black wrap
  • Mazda 1000 white wrap
  • Mazda 1000 gray wrap
  • Mazda 1000 silver wrap
  • Mazda 1000 red wrap
  • Mazda 1000 blue wrap
  • Mazda 1000 green wrap
  • Mazda 1000 yellow wrap
  • Mazda 1000 orange wrap
  • Mazda 1000 purple wrap
  • Mazda 1000 pink wrap
  • Mazda 1000 teal wrap
  • Mazda 1000 brown wrap
  • Mazda 1000 gold wrap
  • Mazda 1000 chrome wrap
  • Mazda 1000 color shift wrap
  • Mazda 1000 carbon fiber wrap
  • Mazda 1000 camo and patterned wrap

How much vinyl to wrap a Mazda 1000

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1977sedan (4 doors)145.7 in (3,700 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Mazda 1000 wrap cost factors

Mazda 1000 wrap cost depends on the size of the sedan and the amount of film used. The full color change wrap takes about 41 ft (12.5 m) of film, while chrome or patterned film takes about 49 ft (15 m). Labor cost changes with the number of cut-outs for the four doors and the many small trim parts. Paint condition also matters, because older repainted panels need more prep work.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: sedan (4 doors).

Mazda 1000 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 1000, first generation, factory photo
Factory color shown

1967–1977 Mazda 1000 sedan (first generation)

1967–1977sedan (4 doors)145.7 in (3,700 mm)

The first generation Mazda 1000 is a subcompact sedan built from 1967 to 1977. A wrap on these years calls for a close look at the paint before any film goes on. Original or repainted panels may be brittle, so a test spot in an unseen area is a good idea. This shows whether the film will stay stuck without pulling paint when removed.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Mazda 1000

Mazda 1000 chrome delete and partial wrap jobs are available for single sections of the car. A partial wrap covers the roof, hood, or mirror caps in a film of your choice. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end for protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda 1000: body, cut-outs and film

Mazda 1000 vinyl wrap planning starts with the subcompact sedan body style. The car measures 145.7 in (3,700 mm) long, which sets the size of the film panels. A full color change wrap uses cast film for the flat and curved sections. The four-door layout gives separate panels that are cut and applied edge to edge.

Mazda 1000 wrap ideas include cut-outs around door handles, mirrors, and badges. The window trim and badges can be covered with black film for a chrome delete. The bumpers and grille may need extra handling because of their older chrome parts. Clip-on trims come off for a cleaner install where the film wraps around edges.

How much vinyl to wrap a Mazda 1000 depends on the production year, but this page lists one generation. The catalog covers the first generation from 1967 to 1977. A full wrap of this body uses about 41 ft (12.5 m) of 60-inch cast film. Adding chrome or patterned film raises the figure to about 49 ft (15 m).

Questions about wrapping a Mazda 1000

How much vinyl does it take to wrap a Mazda 1000?

A Mazda 1000 takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the figure goes up to about 49 ft (15 m). These numbers are for the newest body style in the catalog, the first generation sedan.

Can I wrap only the hood or the roof of a Mazda 1000?

Yes, you can wrap only the hood or the roof of a Mazda 1000. Partial wrap jobs cover the roof, hood, or mirror caps. You can also choose a chrome delete on the window trim and badges, or paint protection film on the front end.

Is a Mazda 1000 hard to wrap?

A Mazda 1000 is not hard to wrap, but it has some extra work. The car is a subcompact sedan with four doors, so the door handles, mirrors, and badges need careful cut-outs. The chrome trim pieces can be wrapped or removed for a smoother finish. The older paint may be weak, so a test spot helps avoid damage.

How many generations of the Mazda 1000 does this page cover?

This page covers one generation of the Mazda 1000. It is the first generation sedan, produced from 1967 to 1977.