Wraps by car

Mazda 121 wrap

The Mazda 121 wrap page covers the three generations of this subcompact car, from 1987 to 2003. A vinyl wrap on the newest body, the third generation hatchback, takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 56 ft (17 m). The older first generation hatchback needs about 41 ft (12.5 m), while the second generation sedan needs about 46 ft (14 m).

3generations13.5 mof film for a full wrap

Mazda 121, third generation, factory photo
Mazda 121, third generation. Factory color shown.

Mazda 121 wrap colors and ideas

  • Mazda 121 black wrap
  • Mazda 121 white wrap
  • Mazda 121 gray wrap
  • Mazda 121 silver wrap
  • Mazda 121 red wrap
  • Mazda 121 blue wrap
  • Mazda 121 green wrap
  • Mazda 121 yellow wrap
  • Mazda 121 orange wrap
  • Mazda 121 purple wrap
  • Mazda 121 pink wrap
  • Mazda 121 teal wrap
  • Mazda 121 brown wrap
  • Mazda 121 gold wrap
  • Mazda 121 chrome wrap
  • Mazda 121 color shift wrap
  • Mazda 121 carbon fiber wrap
  • Mazda 121 camo and patterned wrap

How much vinyl to wrap a Mazda 121

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2003hatchback (3 or 5 doors)150.7 in (3,828 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1991–1996sedan (4 doors)150.0 in (3,810 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1987–1991hatchback (3 doors)136.8 in (3,475 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Mazda 121 wrap cost factors

Mazda 121 wrap cost depends on the generation, film type, and job size. The first generation is shorter at 136.8 in (3,475 mm), so it needs about 41 ft (12.5 m) of cast film. The third generation needs about 44 ft (13.5 m) and the second about 46 ft (14 m). Chrome or patterned film adds more material than standard cast film for each generation.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mazda 121 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 121, third generation, factory photo
Factory color shown

1996–2003 Mazda 121 hatchback (third generation)

1996–2003hatchback (3 or 5 doors)150.7 in (3,828 mm)

The third generation Mazda 121 (1996–2003) is a hatchback with three or five doors, and its wrap needs special care for paint age. The body is 150.7 in (3,828 mm) long, and a full wrap uses about 44 ft (13.5 m) of 60-inch cast film. Panels may be original or repainted on a car of these years, so a test spot comes before a full wrap to check adhesion. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Mazda 121, second generation, factory photo
Factory color shown

1991–1996 Mazda 121 sedan (second generation)

1991–1996sedan (4 doors)150.0 in (3,810 mm)

The second generation Mazda 121 (1991–1996) is a four-door sedan with a length of 150.0 in (3,810 mm). Because it is a sedan, the trunk lid is separate from the rear glass, and the roofline is smoother than the hatchback. A full wrap uses about 46 ft (14 m) of 60-inch cast film, which is more than the hatchback generation due to the extra door seams and trunk area.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Mazda 121, first generation, factory photo
Factory color shown

1987–1991 Mazda 121 hatchback (first generation)

1987–1991hatchback (3 doors)136.8 in (3,475 mm)

The first generation Mazda 121 (1987–1991) is a three-door hatchback with a length of 136.8 in (3,475 mm), making it the smallest of the three. A full wrap needs about 41 ft (12.5 m) of 60-inch cast film, the least amount. The two long side doors are each one large piece of film, which speeds up installation but requires careful handling. The tailgate with the rear glass in it means the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Mazda 121

A partial wrap on a Mazda 121 covers the roof, hood, or mirror caps instead of the whole body. Chrome delete covers window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can be mixed on one car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda 121: body, cut-outs and film

A Mazda 121 vinyl wrap works with small dimensions and simple body styles. The third generation hatchback is 150.7 in (3,828 mm) long with three or five doors. The first generation hatchback is the smallest at 136.8 in (3,475 mm) long with three doors. The second generation is a four-door sedan that is 150.0 in (3,810 mm) long.

Mazda 121 wrap ideas start with the tailgate glass on the hatches. The first and third generations have a tailgate with the rear glass in it, so the film ends at the edge of the glass. The first generation also has two long side doors, and each door is one large piece of film. These features mean fewer seams on the sides but careful trimming around the glass.

To figure how much vinyl to wrap a Mazda 121, compare the three generations. The first generation hatchback needs about 41 ft (12.5 m) of 60-inch cast film. The second generation sedan needs about 46 ft (14 m) because it is longer and has four doors. The third generation hatchback falls between them at about 44 ft (13.5 m). All generations use less film with standard cast vinyl than with chrome or patterned film.

Questions about wrapping a Mazda 121

How much vinyl does it take to wrap a Mazda 121?

A Mazda 121 wrap takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for the newest body. That figure is for the third generation hatchback from 1996 to 2003. If you choose chrome or patterned film, the amount needed goes up to about 56 ft (17 m) for that generation.

Can I wrap only the hood or the roof of a Mazda 121?

Yes, you can wrap only the hood or the roof of a Mazda 121 as a partial wrap. The partial wrap text on this page lists roof, hood, and mirror caps as possible smaller jobs. Chrome delete and paint protection film are also options for specific areas. A partial wrap uses less film than a full wrap and is a good way to change one part of the car.

Is a Mazda 121 hard to wrap?

A Mazda 121 is not hard to wrap because it is a small subcompact, but some details add work. The first and third generation hatchbacks have a tailgate with the rear glass in it, so the film must end at the edge of the glass. The first generation also has two long side doors that are each one large piece of film, which can be heavy to handle alone. The small size overall means fewer square feet than a larger car, but the curves around the hatch and doors still need patience.

How many generations of the Mazda 121 does this page cover?

This page covers three generations of the Mazda 121: the first (1987–1991), second (1991–1996), and third (1996–2003). Each generation has its own body style and film estimate. The three generations are all subcompact cars with different lengths and door counts.