Wraps by car

Mazda 1300 wrap

The Mazda 1300 wrap guide covers the first generation of this compact sedan, produced from 1975 to 1977. A full vinyl wrap of the body uses about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 54 ft (16.5 m). The page includes one generation with body details, wrap film amounts, and typical wrap jobs.

1generations13 mof film for a full wrap

Mazda 1300, first generation, factory photo
Mazda 1300, first generation. Factory color shown.

Mazda 1300 wrap colors and ideas

  • Mazda 1300 black wrap
  • Mazda 1300 white wrap
  • Mazda 1300 gray wrap
  • Mazda 1300 silver wrap
  • Mazda 1300 red wrap
  • Mazda 1300 blue wrap
  • Mazda 1300 green wrap
  • Mazda 1300 yellow wrap
  • Mazda 1300 orange wrap
  • Mazda 1300 purple wrap
  • Mazda 1300 pink wrap
  • Mazda 1300 teal wrap
  • Mazda 1300 brown wrap
  • Mazda 1300 gold wrap
  • Mazda 1300 chrome wrap
  • Mazda 1300 color shift wrap
  • Mazda 1300 carbon fiber wrap
  • Mazda 1300 camo and patterned wrap

How much vinyl to wrap a Mazda 1300

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1977sedan (4 doors)151.8 in (3,855 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Mazda 1300 wrap cost factors

Mazda 1300 wrap cost depends on the film type, wrap complexity, and body condition, not on a fixed price list. A full color change on the first-generation FA3 sedan uses about 43 ft (13 m) of 60-inch cast film. Chrome or patterned film raises the material amount to about 54 ft (16.5 m). A paint protection film on the front end uses a separate clear film and adds labor.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: sedan (4 doors).

Mazda 1300 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 1300, first generation, factory photo
Factory color shown

1975–1977 Mazda 1300 sedan (first generation)

1975–1977sedan (4 doors)151.8 in (3,855 mm)

The first-generation Mazda 1300 was made from 1975 to 1977 as a four-door sedan with the FA3 body code. Paint age is a concern on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. The installer checks paint adhesion on several panels before committing. A repainted area may lift when the film is removed later.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Mazda 1300

A partial wrap on the Mazda 1300 covers the roof, hood, or mirror caps instead of the whole body. A Mazda 1300 chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. Each of these jobs uses less film than a full wrap and can be done separately.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda 1300: body, cut-outs and film

A Mazda 1300 vinyl wrap covers a compact four-door sedan body that is 151.8 in (3,855 mm) long. The sedan style means fewer large flat panels and more door gaps and curved corners than on a hatchback. The wrap installer splits the job into panels: hood, roof, trunk, doors, fenders, and bumpers. Its compact size keeps film use close to the base estimate.

Mazda 1300 wrap ideas start with the parts that need cut-outs or removal for a clean install. Door handles, badges, mirrors, and the antenna come off or are cut around. Window trim is wrapped only if a chrome delete is chosen. The front and rear bumpers can be done in the same color or a contrast film.

How much vinyl to wrap a Mazda 1300 depends on the generation, and this page covers the first generation with the FA3 sedan body code. The car was made from 1975 to 1977, so a later first-generation car has the same dimensions as an earlier one. Someone counting film uses the same base number for any FA3. Chrome or patterned film adds about 11 ft (3.5 m) to the base roll.

Questions about wrapping a Mazda 1300

How much vinyl does it take to wrap a Mazda 1300?

It takes about 43 ft (13 m) of 60-inch (1.52 m) cast film to wrap a Mazda 1300 first-generation sedan. If you choose chrome or patterned film, plan on about 54 ft (16.5 m). The car is 151.8 in (3,855 mm) long, which keeps material use close to the base number.

Can I wrap only the hood or the roof of a Mazda 1300?

Yes, you can wrap only the hood or the roof of a Mazda 1300. A partial wrap covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges, and paint protection film covers the front end.

Is a Mazda 1300 hard to wrap?

The Mazda 1300 is not hard to wrap, but its age adds steps. Paint must be checked with a test spot, especially if panels were repainted. The four-door sedan has door handles, badges, mirrors, and an antenna that need cut-outs or removal. Its compact length of 151.8 in (3,855 mm) keeps the job manageable.

How many generations of the Mazda 1300 does this page cover?

This page covers one generation of the Mazda 1300, the first generation produced from 1975 to 1977. It includes the FA3 four-door sedan. No other generations are listed in the catalog.