Wraps by car

Mazda 3 MPS wrap

This Mazda 3 MPS wrap page covers the hot hatch from 2006 to 2013, in two generations and a single five-door hatchback body. A full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. You also get the first-generation estimate of about 56 ft (17 m) and the cut-out details that matter to an installer.

2generations16 mof film for a full wrap

Mazda 3 MPS, second generation, factory photo
Mazda 3 MPS, second generation. Factory color shown.

Mazda 3 MPS wrap colors and ideas

  • Mazda 3 MPS black wrap
  • Mazda 3 MPS white wrap
  • Mazda 3 MPS gray wrap
  • Mazda 3 MPS silver wrap
  • Mazda 3 MPS red wrap
  • Mazda 3 MPS blue wrap
  • Mazda 3 MPS green wrap
  • Mazda 3 MPS yellow wrap
  • Mazda 3 MPS orange wrap
  • Mazda 3 MPS purple wrap
  • Mazda 3 MPS pink wrap
  • Mazda 3 MPS teal wrap
  • Mazda 3 MPS brown wrap
  • Mazda 3 MPS gold wrap
  • Mazda 3 MPS chrome wrap
  • Mazda 3 MPS color shift wrap
  • Mazda 3 MPS carbon fiber wrap
  • Mazda 3 MPS camo and patterned wrap

How much vinyl to wrap a Mazda 3 MPS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2013hatchback (5 doors)177.4 in (4,505 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
2006–2009hatchback (5 doors)174.6 in (4,435 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Mazda 3 MPS wrap cost factors

The Mazda 3 MPS wrap cost depends mainly on the size of the car and the film you choose. A full wrap of the second generation uses about 52 ft (16 m) of cast film, while the first takes about 56 ft (17 m). Chrome or patterned film increases the amount to about 67 ft (20.5 m) and 66 ft (20 m). Any extra work, like the cut-outs for sensors and fog lamps, also adds to the cost.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2011: bumpers and lights differ between the versions, and so do the film cuts.

Mazda 3 MPS wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 3 MPS, second generation, factory photo
Factory color shown

2009–2013 Mazda 3 MPS hatchback (second generation)

2009–2013hatchback (5 doors)177.4 in (4,505 mm)

The second-generation Mazda 3 MPS from 2009 to 2013 has a body that changed at the 2011 restyling. Bumpers and lights changed, so film cut for one version does not fit the other. When you count film, the same 52 ft (16 m) estimate covers both versions, but the templates differ.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Mazda 3 MPS, first generation, factory photo
Factory color shown

2006–2009 Mazda 3 MPS hatchback (first generation)

2006–2009hatchback (5 doors)174.6 in (4,435 mm)

The first-generation Mazda 3 MPS from 2006 to 2009 is a car where paint age matters before a wrap. Panels may be original or repainted, so a test spot comes before a full wrap. The body is 174.6 in (4,435 mm) long and takes about 56 ft (17 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Mazda 3 MPS

A partial wrap on a Mazda 3 MPS can cover the roof, hood, or mirror caps without wrapping the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda 3 MPS: body, cut-outs and film

The Mazda 3 MPS vinyl wrap starts from a compact five-door hatchback that measures 177.4 in (4,505 mm) in the second generation and 174.6 in (4,435 mm) in the first. Each body is a single style, so the film estimate does not change between trim levels of the same generation. The tailgate carries the rear glass, so the wrap ends at the glass edge on both generations.

Mazda 3 MPS wrap ideas must allow for the parts that need cut-outs or removal. The tailgate has the rear glass in it, so the film is trimmed to the edge of the glass. The second generation adds parking sensors in the bumpers on every trim, and each sensor gets a cut-out. Both generations have fog lamps in the front bumper that also need cut-outs.

How much vinyl to wrap a Mazda 3 MPS depends on the generation you have. The first generation, built from 2006 to 2009, takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The second generation, from 2009 to 2013, uses about 52 ft (16 m) of the same film. A chrome or patterned film adds material, with about 66 ft (20 m) for the first and 67 ft (20.5 m) for the second.

Questions about wrapping a Mazda 3 MPS

How much vinyl does it take to wrap a Mazda 3 MPS?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap the newest Mazda 3 MPS, the second generation from 2009 to 2013. The first generation needs slightly more, about 56 ft (17 m) of the same film.

Which years of the Mazda 3 MPS take the same film cuts?

The same film cuts fit a Mazda 3 MPS from 2009 to 2011, and then from 2011 to 2013. The second generation was restyled in 2011, so the bumpers and lights changed and the cuts do not carry over. The first generation, from 2006 to 2009, has its own cuts.

Can I wrap only the hood or the roof of a Mazda 3 MPS?

Yes, you can wrap only the hood or the roof of a Mazda 3 MPS. A partial wrap can also cover the mirror caps, or you can choose a chrome delete for the window trim and badges. Paint protection film (PPF) is another partial option, applied as clear film on the front end.

Is a Mazda 3 MPS hard to wrap?

The Mazda 3 MPS is not especially difficult to wrap, but it has details that add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The second generation has parking sensors in the bumpers on every trim, each needing a cut-out. Both generations have fog lamps in the front bumper that also need cut-outs.