Wraps by car

Mazda 323F wrap

The Mazda 323F wrap guide covers all three generations of this subcompact liftback and wagon. A vinyl wrap on the newest body uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body needs about 66 ft (20 m).

3generations16 mof film for a full wrap

Mazda 323F, sixth generation, factory photo
Mazda 323F, sixth generation. Factory color shown.

Mazda 323F wrap colors and ideas

  • Mazda 323F black wrap
  • Mazda 323F white wrap
  • Mazda 323F gray wrap
  • Mazda 323F silver wrap
  • Mazda 323F red wrap
  • Mazda 323F blue wrap
  • Mazda 323F green wrap
  • Mazda 323F yellow wrap
  • Mazda 323F orange wrap
  • Mazda 323F purple wrap
  • Mazda 323F pink wrap
  • Mazda 323F teal wrap
  • Mazda 323F brown wrap
  • Mazda 323F gold wrap
  • Mazda 323F chrome wrap
  • Mazda 323F color shift wrap
  • Mazda 323F carbon fiber wrap
  • Mazda 323F camo and patterned wrap

How much vinyl to wrap a Mazda 323F

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003wagon (5 doors)165.9 in (4,215 mm) to 167.9 in (4,265 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1996–1998liftback (5 doors)167.1 in (4,245 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1989–1994liftback (5 doors)167.7 in (4,260 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Mazda 323F wrap cost factors

A Mazda 323F wrap cost is set by the amount of film, the number of panels and the condition of the paint. The full car takes 49–52 ft (15–16 m) of 60-inch (1.52 m) film, so the material volume is close across all generations. A car with original paint needs only a wash and a tack cloth, but a repainted car may need adhesion tests. Cut-outs for the glass and the removal of handles and badges add labor.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2000: bumpers and lights differ between the versions, and so do the film cuts.

Mazda 323F wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 323F, sixth generation, factory photo
Factory color shown

1998–2003 Mazda 323F wagon (sixth generation)

1998–2003wagon (5 doors)165.9 in (4,215 mm) to 167.9 in (4,265 mm)

The sixth generation Mazda 323F was produced from 1998 to 2003 and restyled in 2000. Bumpers and lights changed at the restyling, so film cut for one version does not fit the other. The later body is up to 167.9 in (4,265 mm) long and needs about 52 ft (16 m) of film. A full wrap on this wagon tailgate means the film ends at the edge of the rear glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Mazda 323F, second generation, factory photo
Factory color shown

1996–1998 Mazda 323F liftback (second generation)

1996–1998liftback (5 doors)167.1 in (4,245 mm)

The second generation Mazda 323F was built from 1996 to 1998 as a five-door liftback. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The body is 167.1 in (4,245 mm) long and takes about 49 ft (15 m) of 60-inch (1.52 m) film. The tailgate with the rear glass has a simple cut-out around the window.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Mazda 323F, first generation, factory photo
Factory color shown

1989–1994 Mazda 323F liftback (first generation)

1989–1994liftback (5 doors)167.7 in (4,260 mm)

The first generation Mazda 323F ran from 1989 to 1994 as a five-door liftback. Its size of 167.7 in (4,260 mm) means the wrap needs about 49 ft (15 m) of 60-inch (1.52 m) film. The body has the same tailgate with the rear glass, so the film ends at the edge of the glass. With only five doors and no separate trunk, the number of panels is the same as the later generations.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Mazda 323F

A partial wrap on a Mazda 323F can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end. These smaller jobs use less film and leave the tailgate and rear quarters untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda 323F: body, cut-outs and film

A Mazda 323F vinyl wrap follows the five-door body shape that all three generations share. The car is 165.9 in (4,215 mm) to 167.9 in (4,265 mm) long, so each full side is a single large panel. The tailgate includes the rear glass, and the film edge stops at the glass. The subcompact size keeps the roof panel easy to cover in one piece.

Mazda 323F wrap ideas start with the tailgate, which must be cut out around the rear glass. The door handles and mirrors come off for cleaner film edges. The bumpers can be wrapped on the car with relief cuts at the corners. Badges are removed before wrapping and reinstalled after the film sets.

How much vinyl to wrap a Mazda 323F depends on the generation you have. The sixth generation (1998–2003) needs about 52 ft (16 m) of cast film. The first and second generations use about 49 ft (15 m) of 60-inch (1.52 m) film. All three bodies are within 1.8 in (45 mm) in length, so the extra film on the newest car is for the wagon tailgate.

Questions about wrapping a Mazda 323F

How much vinyl does it take to wrap a Mazda 323F?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Mazda 323F, using the newest body as the reference. The sixth generation (1998–2003) wagon needs that full amount for the tailgate and the extra 1 in (25 mm) of length. If you choose chrome or patterned film, plan for about 66 ft (20 m).

Which years of the Mazda 323F take the same film cuts?

The Mazda 323F years 1989–1994 and 1996–1998 take different film cuts because the first and second generations have different front ends. Within the sixth generation, the 1998–2000 cars share cuts, and the 2000–2003 restyled cars share different cuts. Bumpers and lights changed at the 2000 restyling, so film cut for one version does not fit the other.

Can I wrap only the hood or the roof of a Mazda 323F?

Yes, you can wrap only the hood or the roof of a Mazda 323F. A partial wrap can also cover the mirror caps. A chrome delete on the window trim and badges is another small job. Paint protection film (PPF) on the front end is a clear option that uses less film than a full wrap.

Is a Mazda 323F hard to wrap?

A Mazda 323F is not hard to wrap, but the tailgate with the rear glass adds work. The film must end at the edge of the glass on all generations. The subcompact size keeps the panels short, so one installer can handle each side. Removing the handles and badges gives cleaner edges but adds time.