Wraps by car

Mazda 5 wrap

The Mazda 5 wrap page covers the compact minivan in its two generations. The first generation ran from 2005 to 2010 and the second from 2010 to 2015. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

2generations20 mof film for a full wrap

Mazda 5, second generation, factory photo
Mazda 5, second generation. Factory color shown.

Mazda 5 wrap colors and ideas

  • Mazda 5 black wrap
  • Mazda 5 white wrap
  • Mazda 5 gray wrap
  • Mazda 5 silver wrap
  • Mazda 5 red wrap
  • Mazda 5 blue wrap
  • Mazda 5 green wrap
  • Mazda 5 yellow wrap
  • Mazda 5 orange wrap
  • Mazda 5 purple wrap
  • Mazda 5 pink wrap
  • Mazda 5 teal wrap
  • Mazda 5 brown wrap
  • Mazda 5 gold wrap
  • Mazda 5 chrome wrap
  • Mazda 5 color shift wrap
  • Mazda 5 carbon fiber wrap
  • Mazda 5 camo and patterned wrap

How much vinyl to wrap a Mazda 5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2015van (5 doors)180.5 in (4,585 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
2005–2010van (5 doors)177.4 in (4,505 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Mazda 5 wrap cost factors

The Mazda 5 wrap cost depends on the film area, the number of cut-outs and the prep work the body needs. The second generation is 180.5 in (4,585 mm) long and the first is 177.4 in (4,505 mm), so both take about 66 ft (20 m) of cast film for a full wrap. Cut-outs for parking sensors and fog lamps add labor, and paint correction or repairs add to the prep time.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Mazda 5 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 5, second generation, factory photo
Factory color shown

2010–2015 Mazda 5 van (second generation)

2010–2015van (5 doors)180.5 in (4,585 mm)

The second generation Mazda 5 from 2010 to 2015 keeps the sliding side doors that define the model. The door tracks stay bare and decide where the film is cut, so a wrap cannot cover the full side of the van. This generation also has parking sensors or fog lamps on some trims, which need extra cut-outs.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Mazda 5, first generation, factory photo
Factory color shown

2005–2010 Mazda 5 van (first generation)

2005–2010van (5 doors)177.4 in (4,505 mm)

The first generation Mazda 5 from 2005 to 2010 needs a check of paint age before a vinyl wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The sliding doors and fog lamps still require careful cutting, but the body is shorter at 177.4 in (4,505 mm).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Mazda 5

A partial wrap on a Mazda 5 can cover the roof and hood or the mirror caps, and a chrome delete turns the window trim and badges black. Paint protection film (PPF) is clear film for the front end to guard the hood and bumper. These smaller jobs use less film than a full wrap and can skip the sliding door areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda 5: body, cut-outs and film

The Mazda 5 vinyl wrap has to handle a tall, slab-sided van body with sliding rear doors. The second generation is 180.5 in (4,585 mm) long and the first is 177.4 in (4,505 mm), so both are compact for a minivan. The large side panels and deep bumpers take wide film, while the sliding doors need careful cutting around their tracks.

Mazda 5 wrap ideas start with the sliding door tracks: the tracks stay bare and the film is cut along them. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Some trims also have fog lamps in the front bumper, which need cut-outs in the bumper film.

To know how much vinyl to wrap a Mazda 5, compare the two generations. The first generation was restyled in 2008, but the body shape stayed the same and the film estimate is about 66 ft (20 m) of 60-inch (1.52 m) cast film. The second generation is slightly longer and takes the same 66 ft (20 m), while chrome or patterned film adds about 10 ft (3 m) on the first generation and 11 ft (3.5 m) on the second.

Questions about wrapping a Mazda 5

How much vinyl does it take to wrap a Mazda 5?

A full wrap of a Mazda 5 takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. That figure is for the newest body, the second generation from 2010 to 2015. Chrome or patterned film needs more, about 77 ft (23.5 m).

Are the sliding doors of a Mazda 5 wrapped?

Yes, the sliding doors of a Mazda 5 are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close freely. The tracks themselves are left unpainted and uncovered.

Can I wrap only the hood or the roof of a Mazda 5?

Yes, you can wrap only the hood or the roof of a Mazda 5. A partial wrap can cover the roof and hood, or the mirror caps. A chrome delete covers the window trim and badges.

Is a Mazda 5 hard to wrap?

A Mazda 5 is not especially hard to wrap, but the sliding doors and the bumpers add work. The door tracks must be left bare and the film cut along them. Some trims have parking sensors or fog lamps, so each sensor and lamp needs a cut-out.