Wraps by car

Mazda 818 wrap

The Mazda 818 wrap page covers the 1974–1978 compact, its one generation and vinyl wrap quantities for each body style. A full color change on the coupe uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The wagon needs up to 49 ft (15 m) because of its larger side panels.

1generations15 mof film for a full wrap

Mazda 818, first generation, factory photo
Mazda 818, first generation. Factory color shown.

Mazda 818 wrap colors and ideas

  • Mazda 818 black wrap
  • Mazda 818 white wrap
  • Mazda 818 gray wrap
  • Mazda 818 silver wrap
  • Mazda 818 red wrap
  • Mazda 818 blue wrap
  • Mazda 818 green wrap
  • Mazda 818 yellow wrap
  • Mazda 818 orange wrap
  • Mazda 818 purple wrap
  • Mazda 818 pink wrap
  • Mazda 818 teal wrap
  • Mazda 818 brown wrap
  • Mazda 818 gold wrap
  • Mazda 818 chrome wrap
  • Mazda 818 color shift wrap
  • Mazda 818 carbon fiber wrap
  • Mazda 818 camo and patterned wrap

How much vinyl to wrap a Mazda 818

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1978coupe, sedan, wagon (2 or 4 or 5 doors)160.0 in (4,065 mm)about 44 ft (13.5 m) for the coupe to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Mazda 818 wrap cost factors

A Mazda 818 wrap cost depends on the body style, the vinyl type and the amount of disassembly. The wagon needs up to 49 ft (15 m) of film while the coupe starts at 44 ft (13.5 m), and a chrome delete wrap with patterned film can reach about 62 ft (19 m). A simple color change on the two-door coupe takes less material and fewer hours.

  • Film for a full wrap: about 44 ft (13.5 m) for the coupe to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: coupe, sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mazda 818 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 818, first generation, factory photo
Factory color shown

1974–1978 Mazda 818 coupe, sedan, wagon (first generation)

1974–1978coupe, sedan, wagon (2 or 4 or 5 doors)160.0 in (4,065 mm)

The first generation Mazda 818 from 1974–1978 came as a coupe, sedan or wagon, and the style decides the panel plan and the film amount. The coupe uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, while the wagon takes up to 49 ft (15 m). The sedan sits between those figures with its four doors and standard trunk.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the coupe to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Mazda 818

A partial wrap on a Mazda 818 can cover the roof, hood or mirror caps without a full color change. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear option for the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda 818: body, cut-outs and film

A Mazda 818 vinyl wrap plan starts from the three body styles: two-door coupe, four-door sedan and five-door wagon. The length stays at 160.0 in (4,065 mm) for every style, so the panel count changes rather than the wheelbase. The wagon has the tallest roof and the largest rear side windows, which pushes film use toward 49 ft (15 m). A coupe with its shorter roof can be done with about 44 ft (13.5 m).

Mazda 818 wrap ideas work best when the installer plans cut-outs for the tailgate on the wagon. The rear glass sits in that tailgate, so the film ends at the edge of the glass instead of wrapping around it. Door handles, mirrors and window trim also need careful trimming on every body style.

The question of how much vinyl to wrap a Mazda 818 has one answer for the whole first generation, since the catalog lists only those 1974–1978 cars. The same panel plan applies from the first year to the last, with no facelift or new body to check. Installers can order the same kit for any year and still account for the coupe, sedan or wagon differences.

Questions about wrapping a Mazda 818

How much vinyl does it take to wrap a Mazda 818?

A Mazda 818 needs about 44 ft (13.5 m) to 49 ft (15 m) of 60-inch (1.52 m) cast vinyl for a full wrap. The coupe falls at the lower end and the wagon at the higher end of that range.

Which Mazda 818 body takes more film?

The Mazda 818 wagon takes more film than the coupe or sedan. It needs up to 49 ft (15 m) of 60-inch (1.52 m) film, while the coupe uses about 44 ft (13.5 m).

Can I wrap only the hood or the roof of a Mazda 818?

Yes, you can wrap only the hood or the roof of a Mazda 818 as a partial job. Roof, hood and mirror caps are the usual partial wrap areas on this car.

Is a Mazda 818 hard to wrap?

A Mazda 818 is not especially hard to wrap for a compact car, but the wagon adds work at the tailgate. The rear glass is set into the tailgate, so the film ends at the edge of the glass instead of wrapping cleanly around a separate panel.