Wraps by car

Mazda Axela wrap

This page covers a Mazda Axela wrap across the three generations in the catalog. The Mazda Axela appeared from 2003 to 2019 as a compact hatchback and sedan. A full wrap of the newest body takes about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan with 60-inch (1.52 m) vinyl wrap. Chrome or patterned film can require up to about 66 ft (20 m).

3generations17 mof film for a full wrap

Mazda Axela, third generation, factory photo
Mazda Axela, third generation. Factory color shown.

Mazda Axela wrap colors and ideas

  • Axela black wrap
  • Axela white wrap
  • Axela gray wrap
  • Axela silver wrap
  • Axela red wrap
  • Axela blue wrap
  • Axela green wrap
  • Axela yellow wrap
  • Axela orange wrap
  • Axela purple wrap
  • Axela pink wrap
  • Axela teal wrap
  • Axela brown wrap
  • Axela gold wrap
  • Axela chrome wrap
  • Axela color shift wrap
  • Axela carbon fiber wrap
  • Axela camo and patterned wrap

How much vinyl to wrap a Mazda Axela

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019hatchback, sedan (4 or 5 doors)175.6 in (4,460 mm) to 180.5 in (4,585 mm)about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
2009–2013hatchback, sedan (4 or 5 doors)177.4 in (4,506 mm) to 180.9 in (4,595 mm)about 56 ft (17 m) for the sedan to 57 ft (17.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
2003–2009hatchback, sedan (4 or 5 doors)173.4 in (4,405 mm) to 176.6 in (4,485 mm)about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Axela wrap cost factors

An Axela wrap cost depends mainly on the size of the job and the film you pick. A full car uses between 51 ft (15.5 m) and 57 ft (17.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned films run up to about 66 ft (20 m). Preparation time matters too: a first-generation car may need paint correction before the vinyl goes on. Removing and refitting parts like door handles and mirrors also adds shop hours.

  • Film for a full wrap: about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Axela wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Axela, third generation, factory photo
Factory color shown

2013–2019 Axela hatchback, sedan (third generation)

2013–2019hatchback, sedan (4 or 5 doors)175.6 in (4,460 mm) to 180.5 in (4,585 mm)

The third generation Axela ran from 2013 to 2019 with a restyling in 2016. For the restyling, Mazda changed the bumpers and lights, so film cut for one version does not fit the other. A wrapper needs the correct template for a 2013–2016 or 2016–2019 body. The panel count stays the same, but the front and rear templates are not interchangeable.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Mazda Axela, second generation, factory photo
Factory color shown

2009–2013 Axela hatchback, sedan (second generation)

2009–2013hatchback, sedan (4 or 5 doors)177.4 in (4,506 mm) to 180.9 in (4,595 mm)

The second generation Axela from 2009 to 2013 came as a hatchback and a sedan. The body style decides the panel plan and the film amount: the hatchback takes about 57 ft (17.5 m) and the sedan about 56 ft (17 m). The tailgate on the hatchback is larger and includes the rear glass, so the film piece is wider. Sedan trunks are simpler, but the decklid and rear bumper still need separate pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the sedan to 57 ft (17.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Mazda Axela, first generation, factory photo
Factory color shown

2003–2009 Axela hatchback, sedan (first generation)

2003–2009hatchback, sedan (4 or 5 doors)173.4 in (4,405 mm) to 176.6 in (4,485 mm)

The first generation Axela was sold from 2003 to 2009, so paint age is the first thing a wrapper checks. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A repainted panel may have softer paint that lifts when the film is repositioned. If the paint is weak, the shop may recommend a paint correction or a partial wrap instead.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Axela

An Axela chrome delete covers the bright window trim and badges with black film. A partial wrap often includes the roof, hood or mirror caps as a color accent. Paint protection film on the front end uses clear film on the hood, bumper, fenders and mirrors. These jobs use far less material than a full wrap and can be done body style by body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Axela: body, cut-outs and film

A Mazda Axela vinyl wrap uses the same core layout for every generation: hood, roof, bumpers, doors, fenders, rockers and the tailgate. The car is compact, measuring 173.4 in (4,405 mm) to 180.9 in (4,595 mm) long depending on generation and body style. Both the hatchback and the sedan are counted as 4 or 5 door styles. That size keeps the panel count modest and the film joins short.

Axela wrap ideas start with the tailgate glass sitting right in the liftgate panel. The film ends at the edge of the glass, so the installer trims the opening and tucks the edge cleanly. Door handles, badges and the front grille surround also need cut-outs, and the mirrors are best done off the car. The roof rails on higher trims need a careful relief cut before the roof panel is laid.

To calculate how much vinyl to wrap an Axela, generation matters more than the badge. The first generation from 2003 to 2009 uses about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan. The second generation from 2009 to 2013 takes about 56 ft (17 m) for the sedan to 57 ft (17.5 m) for the hatchback. The third generation from 2013 to 2019 is back to 51 ft (15.5 m) for the hatchback and 56 ft (17 m) for the sedan, all with 60-inch (1.52 m) film.

Questions about wrapping a Mazda Axela

How much vinyl does it take to wrap a Mazda Axela?

A Mazda Axela takes about 51 ft (15.5 m) for the hatchback to 56 ft (17 m) for the sedan of the newest body, using 60-inch (1.52 m) cast film. Chrome or patterned film can push that up to about 66 ft (20 m).

Which years of the Axela take the same film cuts?

The third generation has two film cuts because of the 2016 restyling, so 2013–2016 and 2016–2019 are different. The first generation (2003–2009) and second generation (2009–2013) each take one set of cuts for their whole run.

Which Axela body takes more film?

On the first and third generations, the sedan takes more film: 56 ft (17 m) against 51 ft (15.5 m) for the hatchback. On the second generation it reverses: the hatchback takes 57 ft (17.5 m) and the sedan 56 ft (17 m).

Can I wrap only the hood or the roof of an Axela?

Yes, you can wrap only the hood or the roof of an Axela as a partial wrap. Mirror caps and chrome delete on the window trim and badges are also common smaller jobs, and paint protection film on the front end works alone without a full wrap.