Wraps by car

Mazda AZ-1 wrap

The Mazda AZ-1 wrap page covers the first generation, made from 1992 to 1995. It lists the body sizes and tells how much vinyl wrap a full wrap of the coupe takes. The newest body needs about 34 ft (10.5 m) of 60-inch (1.52 m) cast film.

1generations10.5 mof film for a full wrap

Mazda AZ-1, first generation, factory photo
Mazda AZ-1, first generation. Factory color shown.

Mazda AZ-1 wrap colors and ideas

  • Mazda AZ-1 black wrap
  • Mazda AZ-1 white wrap
  • Mazda AZ-1 gray wrap
  • Mazda AZ-1 silver wrap
  • Mazda AZ-1 red wrap
  • Mazda AZ-1 blue wrap
  • Mazda AZ-1 green wrap
  • Mazda AZ-1 yellow wrap
  • Mazda AZ-1 orange wrap
  • Mazda AZ-1 purple wrap
  • Mazda AZ-1 pink wrap
  • Mazda AZ-1 teal wrap
  • Mazda AZ-1 brown wrap
  • Mazda AZ-1 gold wrap
  • Mazda AZ-1 chrome wrap
  • Mazda AZ-1 color shift wrap
  • Mazda AZ-1 carbon fiber wrap
  • Mazda AZ-1 camo and patterned wrap

How much vinyl to wrap a Mazda AZ-1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1995coupe (2 doors)129.7 in (3,295 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

Mazda AZ-1 wrap cost factors

Mazda AZ-1 wrap cost is set by film width, the wrap area, and the work on the two long side doors. A full wrap uses about 34 ft (10.5 m) of 60-inch (1.52 m) cast film, or about 44 ft (13.5 m) for chrome or patterned film. The small coupe body keeps the area low, but each door is one large piece. Removal of old paint or wrap adds time to the job.

  • Film for a full wrap: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mazda AZ-1 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda AZ-1, first generation, factory photo
Factory color shown

1992–1995 Mazda AZ-1 coupe (first generation)

1992–1995coupe (2 doors)129.7 in (3,295 mm)

The first generation (1992–1995) Mazda AZ-1 is a coupe often found with original or repainted panels after these years. A test spot on the paint comes before a full wrap. The side doors remain one large piece of film regardless of paint age.

Two long side doors: each door is one large piece of film.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on a Mazda AZ-1

Mazda AZ-1 chrome delete and partial wrap jobs fit the small coupe body. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end is another option.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda AZ-1: body, cut-outs and film

A Mazda AZ-1 vinyl wrap is planned around one body style, a two-door coupe. Its length of 129.7 in (3,295 mm) makes the AZ-1 a small car. That size keeps the wrap area low, but every panel still needs clean film lines.

Mazda AZ-1 wrap ideas often start with the two long side doors. Each door is one large piece of film, so a cast film is needed for a smooth finish. The door handles and mirrors come off for a clean edge. The side windows are small and leave little room for trimming.

How much vinyl to wrap a Mazda AZ-1 depends on the year, since all AZ-1s share the same coupe body from 1992 to 1995. A full wrap of the newest body takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. Find a partial wrap uses less film and suits the small panels.

Questions about wrapping a Mazda AZ-1

How much vinyl does it take to wrap a Mazda AZ-1?

It takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast film to wrap a Mazda AZ-1 fully. That figure is for the newest body of the first generation, the coupe from 1992 to 1995. Chrome or patterned film needs about 44 ft (13.5 m).

Can I wrap only the hood or the roof of a Mazda AZ-1?

Yes, you can wrap only the hood or the roof of a Mazda AZ-1. A partial wrap on this car also covers mirror caps. Chrome delete on the window trim and badges is another smaller job. Paint protection film on the front end is a third option.

Is a Mazda AZ-1 hard to wrap?

The Mazda AZ-1 is not the easiest car to wrap because of its two long side doors. Each door is one large piece of film, which calls for careful handling. The car's small size of 129.7 in (3,295 mm) leaves little room for trimming around the glass. A cast film helps the door pieces sit flat.

How many generations of the Mazda AZ-1 does this page cover?

This page covers one generation of the Mazda AZ-1, the first generation made from 1992 to 1995. This generation includes the coupe body style with two doors. All AZ-1s share the same small body for those years.