Wraps by car

Mazda AZ-Offroad wrap

A Mazda AZ-Offroad wrap changes the look of this compact SUV while protecting its paint. This page covers the only generation of the AZ-Offroad, sold from 2002 to 2014. A full wrap of its three-door body takes about 39 ft (12 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film raises the estimate to about 46 ft (14 m).

1generations12 mof film for a full wrap

Mazda AZ-Offroad, first generation, factory photo
Mazda AZ-Offroad, first generation. Factory color shown.

Mazda AZ-Offroad wrap colors and ideas

  • AZ-Offroad black wrap
  • AZ-Offroad white wrap
  • AZ-Offroad gray wrap
  • AZ-Offroad silver wrap
  • AZ-Offroad red wrap
  • AZ-Offroad blue wrap
  • AZ-Offroad green wrap
  • AZ-Offroad yellow wrap
  • AZ-Offroad orange wrap
  • AZ-Offroad purple wrap
  • AZ-Offroad pink wrap
  • AZ-Offroad teal wrap
  • AZ-Offroad brown wrap
  • AZ-Offroad gold wrap
  • AZ-Offroad chrome wrap
  • AZ-Offroad color shift wrap
  • AZ-Offroad carbon fiber wrap
  • AZ-Offroad camo and patterned wrap

How much vinyl to wrap a Mazda AZ-Offroad

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2014SUV (3 doors)133.7 in (3,395 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

AZ-Offroad wrap cost factors

AZ-Offroad wrap cost depends mostly on the film you pick and how much of the car you wrap. A color change wrap on this 133.7 in (3,395 mm) SUV uses about 39 ft (12 m) of 60-inch (1.52 m) film. Chrome or patterned film raises the amount to about 46 ft (14 m) and costs more per foot. The condition of the paint also matters, because old or repainted panels need more prep work.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

AZ-Offroad wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda AZ-Offroad, first generation, factory photo
Factory color shown

2002–2014 AZ-Offroad SUV (first generation)

2002–2014SUV (3 doors)133.7 in (3,395 mm)

The first generation Mazda AZ-Offroad, sold from 2002 to 2014, is the only body this page covers. Paint age matters on a car of these years, because panels may be original or repainted. A test spot comes before a full wrap to make sure the film will bond well. If the paint is sound, the wrap can go on without extra steps.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on an AZ-Offroad

A partial wrap on a Mazda AZ-Offroad can cover the roof, hood, or mirror caps while leaving the rest of the paint untouched. An AZ-Offroad chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda AZ-Offroad: body, cut-outs and film

A Mazda AZ-Offroad vinyl wrap follows a small three-door SUV body that is 133.7 in (3,395 mm) long. The short length and simple shape keep film use on the lower end for an SUV. The two long side doors each take one large piece of film, which speeds up installation. The tailgate carries the rear glass, so the film ends at the edge of the glass.

AZ-Offroad wrap ideas start with a full color change on the slab-sided body. The tailgate needs a cut-out around the rear glass because the window moves with the tailgate. The two long side doors are each one large piece of film with only the handles and mirrors to trim around. For a clean look, the door handles and mirrors can be removed before the film goes on.

To know how much vinyl to wrap an AZ-Offroad, use the only generation sold from 2002 to 2014. This SUV came only as a three-door with the JM body code, so film estimates stay the same across all years. A full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 46 ft (14 m).

Questions about wrapping a Mazda AZ-Offroad

How much vinyl does it take to wrap a Mazda AZ-Offroad?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Mazda AZ-Offroad fully. If you choose chrome or patterned film, the estimate goes up to about 46 ft (14 m). The SUV is only 133.7 in (3,395 mm) long, which keeps the amount low for a vehicle of its class.

Can I wrap only the hood or the roof of an AZ-Offroad?

Yes, you can wrap only the hood or the roof of an AZ-Offroad. These are listed as partial wrap options, along with mirror caps. This saves film and time compared to a full wrap. You can add a chrome delete on the window trim and badges or clear paint protection film on the front end.

Is an AZ-Offroad hard to wrap?

An AZ-Offroad is not especially hard to wrap, but the tailgate adds a step. The rear glass is inside the tailgate, so the film must end at the edge of the glass. The two long side doors are each one large piece, which makes them easier to handle. The SUV's small size, 133.7 in (3,395 mm) long, also helps keep the job manageable.

How many generations of the AZ-Offroad does this page cover?

This page covers one generation of the Mazda AZ-Offroad, sold from 2002 to 2014. That generation was the only one ever produced for this model. All AZ-Offroad vehicles share the same three-door SUV body. So the wrap estimates on this page apply to every year of this car.