Wraps by car

Mazda AZ-Wagon wrap

The Mazda AZ-Wagon wrap page covers all four generations of this minivan, from 1994 to 2012. A full wrap of the newest body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 57 ft (17.5 m).

4generations15 mof film for a full wrap

Mazda AZ-Wagon, fourth generation, factory photo
Mazda AZ-Wagon, fourth generation. Factory color shown.

Mazda AZ-Wagon wrap colors and ideas

  • AZ-Wagon black wrap
  • AZ-Wagon white wrap
  • AZ-Wagon gray wrap
  • AZ-Wagon silver wrap
  • AZ-Wagon red wrap
  • AZ-Wagon blue wrap
  • AZ-Wagon green wrap
  • AZ-Wagon yellow wrap
  • AZ-Wagon orange wrap
  • AZ-Wagon purple wrap
  • AZ-Wagon pink wrap
  • AZ-Wagon teal wrap
  • AZ-Wagon brown wrap
  • AZ-Wagon gold wrap
  • AZ-Wagon chrome wrap
  • AZ-Wagon color shift wrap
  • AZ-Wagon carbon fiber wrap
  • AZ-Wagon camo and patterned wrap

How much vinyl to wrap a Mazda AZ-Wagon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2012van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2003–2008van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1999–2003van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1994–1998van (5 doors)129.7 in (3,295 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

AZ-Wagon wrap cost factors

AZ-Wagon wrap cost depends on the amount of film, the labor for the sliding doors, and the condition of the paint. The first generation is slightly shorter and needs about 48 ft (14.5 m), while later ones need about 49 ft (15 m). A partial wrap or chrome delete takes less film and fewer hours than a full wrap.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

AZ-Wagon wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda AZ-Wagon, fourth generation, factory photo
Factory color shown

2008–2012 AZ-Wagon van (fourth generation)

2008–2012van (5 doors)133.7 in (3,395 mm)

The fourth generation Mazda AZ-Wagon (2008–2012) has sliding side doors whose tracks stay bare and decide where the film is cut. Installers run the vinyl to the edge of the track recess and trim it there. The door itself is wrapped as one panel without covering the track.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mazda AZ-Wagon, third generation, factory photo
Factory color shown

2003–2008 AZ-Wagon van (third generation)

2003–2008van (5 doors)133.7 in (3,395 mm)

The third generation Mazda AZ-Wagon was restyled in 2005, with new bumpers and lights. Film cut for the pre-2005 version does not fit the post-2005 version. Installers measure each car before printing or cutting patterned film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mazda AZ-Wagon, second generation, factory photo
Factory color shown

1999–2003 AZ-Wagon van (second generation)

1999–2003van (5 doors)133.7 in (3,395 mm)

On a second generation Mazda AZ-Wagon (1999–2003), paint age matters before a full wrap. Panels may be original, faded, or repainted, so a test spot is applied to check adhesion. Any rust or peeling clear coat must be addressed before wrapping.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mazda AZ-Wagon, first generation, factory photo
Factory color shown

1994–1998 AZ-Wagon van (first generation)

1994–1998van (5 doors)129.7 in (3,295 mm)

The first generation Mazda AZ-Wagon (1994–1998) is the shortest at 129.7 in (3,295 mm), so it uses a little less film than later models. Its van body with five doors means the same number of panels as the others. The sliding door tracks still stay bare and need careful cutting.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an AZ-Wagon

For the Mazda AZ-Wagon, a partial wrap can cover the roof, hood, and mirror caps. AZ-Wagon chrome delete targets the window trim and badges. Paint protection film (PPF) is clear film applied to the front end, including the hood, fenders, and bumper.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda AZ-Wagon: body, cut-outs and film

A Mazda AZ-Wagon vinyl wrap follows the boxy van shape, with five doors including the tailgate. The newest three generations are 133.7 in (3,395 mm) long, while the first is 129.7 in (3,295 mm). The tall sides and flat roof need large panels that installers cut from wide rolls.

AZ-Wagon wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The tailgate, bumpers, and door handles are removed or masked for clean edges. Badges and window trim are taken off before applying film, then reinstalled.

To know how much vinyl to wrap an AZ-Wagon, compare the four generations. The first generation uses about 48 ft (14.5 m) of cast film, while the other three use about 49 ft (15 m). Chrome or patterned film adds roughly 8 ft (2.5 m) to either estimate.

Questions about wrapping a Mazda AZ-Wagon

How much vinyl does it take to wrap a Mazda AZ-Wagon?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Mazda AZ-Wagon of the newest body. For chrome or patterned film, you need about 57 ft (17.5 m). The first generation is slightly smaller, needing about 48 ft (14.5 m) of cast film.

Are the sliding doors of an AZ-Wagon wrapped?

Yes, the sliding doors of an AZ-Wagon are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors still slide freely. Installers trim the vinyl at the edge of the track recess for a clean line.

Can I wrap only the hood or the roof of an AZ-Wagon?

Yes, you can wrap only the hood or the roof of an AZ-Wagon. A partial wrap often includes the roof, hood, and mirror caps. The same cast film is used, and the edges are wrapped into the seams for a neat finish.

Is an AZ-Wagon hard to wrap?

An AZ-Wagon is not especially hard to wrap, but the sliding doors add work. The door tracks must stay bare, so the film is cut along them carefully. The tall, flat sides also require large panels that need good technique to avoid wrinkles.