Wraps by car

Mazda Biante wrap

The Mazda Biante wrap guide covers the first generation of this minivan, produced from 2008 to 2018. A full wrap of the Biante body takes about 69 ft (21 m) of 60-inch (1.52 m) cast vinyl wrap. If you choose chrome or patterned film, plan for about 80 ft (24.5 m) of material. This page explains the film amounts, the body details, and the work involved.

1generations21 mof film for a full wrap

Mazda Biante, first generation, factory photo
Mazda Biante, first generation. Factory color shown.

Mazda Biante wrap colors and ideas

  • Biante black wrap
  • Biante white wrap
  • Biante gray wrap
  • Biante silver wrap
  • Biante red wrap
  • Biante blue wrap
  • Biante green wrap
  • Biante yellow wrap
  • Biante orange wrap
  • Biante purple wrap
  • Biante pink wrap
  • Biante teal wrap
  • Biante brown wrap
  • Biante gold wrap
  • Biante chrome wrap
  • Biante color shift wrap
  • Biante carbon fiber wrap
  • Biante camo and patterned wrap

How much vinyl to wrap a Mazda Biante

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2018van (5 doors)185.6 in (4,715 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Biante wrap cost factors

Biante wrap cost depends on the amount of film, the number of cutouts, and the extra work from the body design. This minivan needs about 69 ft (21 m) of 60-inch (1.52 m) cast film for a full wrap, or about 80 ft (24.5 m) for chrome or patterned film. The sliding door tracks and the tall 72.2 in (1,835 mm) roof add labor for cutting and working from a platform. The final cost also depends on the film brand, the finish, and the condition of the paint.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Biante wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Biante, first generation, factory photo
Factory color shown

2008–2018 Biante van (first generation)

2008–2018van (5 doors)185.6 in (4,715 mm)

The first generation Mazda Biante (2008–2018) is a five-door minivan with sliding side doors. The door tracks stay bare, so the installer cuts the vinyl along the track edges and does not wrap the track itself. This body is 185.6 in (4,715 mm) long and 72.2 in (1,835 mm) tall, which means the roof has to be wrapped from a platform. A full wrap of this generation needs about 69 ft (21 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Biante

A partial wrap on a Mazda Biante can cover the roof, hood, and mirror caps as single panels without wrapping the whole van. Biante chrome delete is a smaller job that covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Biante: body, cut-outs and film

A Mazda Biante vinyl wrap has to follow a tall van body of 185.6 in (4,715 mm) in length and 72.2 in (1,835 mm) in height. The five-door layout means the wrap is split at every door opening, so the film stays clean around the handles and gaps. Because this is a long body, the installer works panel by panel and keeps the seams along natural lines. A roof wrap on this vehicle requires a platform to reach the center safely.

Biante wrap ideas start with the sliding side doors, because the door tracks stay bare and decide where the film is cut. The installer trims the vinyl along the track edges and leaves the mechanism unwrapped, so the doors keep sliding freely. Door handles, badges, and the front grille are removed for a cleaner edge and fewer relief cuts. The tall body also means the roof is wrapped from a platform rather than a ladder.

How much vinyl to wrap a Biante depends on the film type and the number of panels you cover. A full color change on the first generation (2008–2018) uses about 69 ft (21 m) of 60-inch (1.52 m) cast film. If you pick chrome or patterned film, the estimate goes up to about 80 ft (24.5 m) because the pattern has to be matched at the seams. The sliding door tracks and the tall roof do not change the total amount, but they change how the film is cut.

Questions about wrapping a Mazda Biante

How much vinyl does it take to wrap a Mazda Biante?

A full wrap of a Mazda Biante takes about 69 ft (21 m) of 60-inch (1.52 m) cast vinyl film. If you choose chrome or patterned film, the estimate is about 80 ft (24.5 m) because the pattern must be matched at the seams. This amount covers the first generation body, including the roof and the sliding door panels.

Are the sliding doors of a Biante wrapped?

Yes, the sliding doors of a Biante are wrapped, but the door tracks stay bare. The film is cut along the track edges so the door can still slide without catching the vinyl. The installer leaves the track itself unwrapped and works around it for a clean finish.

Can I wrap only the hood or the roof of a Biante?

Yes, you can wrap only the hood or the roof of a Biante. A partial wrap on this van often covers the roof, hood, and mirror caps as single panels. A partial wrap uses less film than a full wrap and can be combined with chrome delete on the window trim and badges.

Is a Biante hard to wrap?

A Biante is not difficult to wrap, but the body design adds work. The sliding side door tracks have to be cut around and left bare, and the tall body of 72.2 in (1,835 mm) means the roof is wrapped from a platform. The long 185.6 in (4,715 mm) body also means more seams and more time spent on each panel.