Wraps by car

Mazda Cosmo wrap

The Mazda Cosmo wrap page covers the 1981–1985 first generation sedan. This catalog lists one generation, the HB series four-door body, as the only Cosmo in production records. A full vinyl wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Mazda Cosmo, first generation, factory photo
Mazda Cosmo, first generation. Factory color shown.

Mazda Cosmo wrap colors and ideas

  • Cosmo black wrap
  • Cosmo white wrap
  • Cosmo gray wrap
  • Cosmo silver wrap
  • Cosmo red wrap
  • Cosmo blue wrap
  • Cosmo green wrap
  • Cosmo yellow wrap
  • Cosmo orange wrap
  • Cosmo purple wrap
  • Cosmo pink wrap
  • Cosmo teal wrap
  • Cosmo brown wrap
  • Cosmo gold wrap
  • Cosmo chrome wrap
  • Cosmo color shift wrap
  • Cosmo carbon fiber wrap
  • Cosmo camo and patterned wrap

How much vinyl to wrap a Mazda Cosmo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1985sedan (4 doors)182.7 in (4,640 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Cosmo wrap cost factors

Cosmo wrap cost depends on the fixed body length of 182.7 in (4,640 mm) and the single four-door style. A full color change uses about 49 ft (15 m) of cast film, so the installer's time and the film area set the price. Repaint condition on a car of these years can add surface preparation work before the vinyl wrap.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Cosmo wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Cosmo, first generation, factory photo
Factory color shown

1981–1985 Cosmo sedan (first generation)

1981–1985sedan (4 doors)182.7 in (4,640 mm)

The first generation Mazda Cosmo of 1981–1985 is the only one in this catalog. On a car of these years panels may be original or repainted, so an installer does a test spot before a full wrap. The sedan shape means the roof, hood, and doors need the largest film panels.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cosmo

The Mazda Cosmo can take smaller jobs than a full vinyl wrap. A partial wrap covers the roof, hood, or mirror caps separately. Chrome delete films the window trim and badges in black, and paint protection film (PPF) adds a clear layer on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Cosmo: body, cut-outs and film

The Mazda Cosmo vinyl wrap has to cover a single sedan body with four doors. At 182.7 in (4,640 mm) long, the car is a mid-size design that needs careful panel planning. The flat rear deck and long hood use film efficiently, while the door areas take the largest pieces.

Cosmo wrap ideas from an installer start with the parts that need cut-outs or come off. Door handles, mirrors, badges, and trim should be removed before the film goes on. The wrap installer also makes precise cuts around the fuel filler flap and antenna base.

How much vinyl to wrap a Cosmo is simple because the page covers only one generation. Owners of the 1981–1985 sedan all measure film the same way, with no body style changes between years. The catalog therefore gives one film estimate of about 49 ft (15 m) for a full wrap.

Questions about wrapping a Mazda Cosmo

How much vinyl does it take to wrap a Mazda Cosmo?

A full Mazda Cosmo wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. That estimate from the catalog covers the 1981–1985 first generation body. Patterned or chrome film needs more material, around 64 ft (19.5 m).

Can I wrap only the hood or the roof of a Cosmo?

Yes, you can wrap only the hood or the roof of a Cosmo. The partial wrap options for this car list the roof, hood, and mirror caps as separate jobs. A vinyl wrap installer can quote just one of those panels without doing the rest of the car.

Is a Cosmo hard to wrap?

A Cosmo is not especially hard to wrap, but the four-door sedan shape adds some work. The doors, handles, and mirror caps must come off or be cut around, which takes extra time. At 182.7 in (4,640 mm) long, the body needs careful panel alignment for a clean vinyl wrap.

How many generations of the Cosmo does this page cover?

This page covers one generation of the Mazda Cosmo. The catalog lists only the 1981–1985 first generation sedan with the HB body code. No other Cosmo generations are included in this guide.