Wraps by car

Mazda Cronos wrap

This page covers the Mazda Cronos wrap for the first generation, built from 1991 to 1995. The catalog holds one generation of this mid-size sedan. A full vinyl wrap on that body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 64 ft (19.5 m).

1generations16 mof film for a full wrap

Mazda Cronos, first generation, factory photo
Mazda Cronos, first generation. Factory color shown.

Mazda Cronos wrap colors and ideas

  • Cronos black wrap
  • Cronos white wrap
  • Cronos gray wrap
  • Cronos silver wrap
  • Cronos red wrap
  • Cronos blue wrap
  • Cronos green wrap
  • Cronos yellow wrap
  • Cronos orange wrap
  • Cronos purple wrap
  • Cronos pink wrap
  • Cronos teal wrap
  • Cronos brown wrap
  • Cronos gold wrap
  • Cronos chrome wrap
  • Cronos color shift wrap
  • Cronos carbon fiber wrap
  • Cronos camo and patterned wrap

How much vinyl to wrap a Mazda Cronos

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1995sedan (4 doors)184.8 in (4,695 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Cronos wrap cost factors

Cronos wrap cost depends on the sedan’s size and the film type, not on a fixed price list. A 184.8 in (4,695 mm) body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film, which sets the base material amount. Chrome or patterned film raises the amount to about 64 ft (19.5 m) and adds cutting time. The cost also changes with how many parts come off the car and how much cut-out work the trim needs.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Cronos wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Cronos, first generation, factory photo
Factory color shown

1991–1995 Cronos sedan (first generation)

1991–1995sedan (4 doors)184.8 in (4,695 mm)

The first generation Mazda Cronos ran from 1991 to 1995, so paint age is the first thing to check before a wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The wrap installer tests the film on each panel to see how it sticks to old paint. Any weak paint gets sealed or left unwrapped to avoid lifting the clear coat.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cronos

A partial wrap on the Mazda Cronos covers the roof, hood, or mirror caps as separate jobs. Chrome delete is another option: the window trim and badges covered with black film. Paint protection film (PPF) puts clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can match the sedan’s shape.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Cronos: body, cut-outs and film

The Mazda Cronos vinyl wrap fits one body style: a four-door sedan that is 184.8 in (4,695 mm) long. That single shape makes film estimating straightforward, with no coupe or wagon panels to recalculate. The mid-size body still needs careful work around the long roof and the rear deck. A full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) cast film.

Cronos wrap ideas start with removing the door handles, mirrors, and badges before any film goes on. The window trim and grille need cut-outs or a chrome delete, where bright trim is covered with black film. The side moldings on this sedan often sit low enough to wrap as separate pieces. Take the antenna off the rear quarter for a cleaner roofline.

How much vinyl to wrap a Cronos stays the same for the whole run from 1991 to 1995. The sedan body kept one length of 184.8 in (4,695 mm) in those years. A wrapper counting film can order the same 52 ft (16 m) roll no matter the production year. Panel shapes did not change enough to alter the estimate.

Questions about wrapping a Mazda Cronos

How much vinyl does it take to wrap a Mazda Cronos?

A full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film on the Mazda Cronos. That figure is for the first generation sedan built from 1991 to 1995. For chrome or patterned film, allow about 64 ft (19.5 m). The amount stays close to that for every year of this body.

Can I wrap only the hood or the roof of a Cronos?

Yes, you can wrap only the hood or the roof of a Cronos. The partial wrap list for this car includes the roof, hood, and mirror caps as separate jobs. A roof-only wrap on the sedan needs film for a panel about the width of the car and under 5 ft (1.5 m) long. The hood piece is shorter, so both jobs use much less than a full 52 ft (16 m) roll.

Is a Cronos hard to wrap?

A Cronos is not hard to wrap for a shop, but the mid-size sedan adds work in a few spots. The 184.8 in (4,695 mm) body means long roof sections that need two people to lay flat. The side moldings and window trim require cut-outs or removal before the film goes on. Old paint from 1991 to 1995 can also lift if you skip a test spot.

How many generations of the Cronos does this page cover?

This page covers one generation of the Mazda Cronos. The catalog lists only the first generation, built from 1991 to 1995. That generation is a four-door sedan with the GE body code. All film amounts and wrap notes on this page are for that single body.