Wraps by car

Mazda Efini MS-6 wrap

The Mazda Efini MS-6 wrap guide covers the single generation sold from 1991 to 1994. A full wrap of this mid-size hatchback uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap. This page explains the body details, film amounts, and wrap options for the Efini MS-6.

1generations16.5 mof film for a full wrap

Mazda Efini MS-6, first generation, factory photo
Mazda Efini MS-6, first generation. Factory color shown.

Mazda Efini MS-6 wrap colors and ideas

  • Efini MS-6 black wrap
  • Efini MS-6 white wrap
  • Efini MS-6 gray wrap
  • Efini MS-6 silver wrap
  • Efini MS-6 red wrap
  • Efini MS-6 blue wrap
  • Efini MS-6 green wrap
  • Efini MS-6 yellow wrap
  • Efini MS-6 orange wrap
  • Efini MS-6 purple wrap
  • Efini MS-6 pink wrap
  • Efini MS-6 teal wrap
  • Efini MS-6 brown wrap
  • Efini MS-6 gold wrap
  • Efini MS-6 chrome wrap
  • Efini MS-6 color shift wrap
  • Efini MS-6 carbon fiber wrap
  • Efini MS-6 camo and patterned wrap

How much vinyl to wrap a Mazda Efini MS-6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1994hatchback (5 doors)184.8 in (4,695 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Efini MS-6 wrap cost factors

The Efini MS-6 wrap cost depends on the film amount, the panel work, and the paint condition. The car needs about 54 ft (16.5 m) of film for a full wrap, or about 69 ft (21 m) for chrome or patterned film. Removing the tailgate trim and testing old paint add labor time.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Efini MS-6 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Efini MS-6, first generation, factory photo
Factory color shown

1991–1994 Efini MS-6 hatchback (first generation)

1991–1994hatchback (5 doors)184.8 in (4,695 mm)

The first generation Efini MS-6 from 1991 to 1994 is the only generation this page covers. On a car of these years the panels may be original or repainted, so a test spot comes before a full wrap. A wrap installer checks paint adhesion on each panel first.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Efini MS-6

A partial wrap on an Efini MS-6 can cover the roof, the hood, or the mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is also an option for this car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Efini MS-6: body, cut-outs and film

The Mazda Efini MS-6 vinyl wrap has to fit one body style: a five-door hatchback with the GE platform code. The car is 184.8 in (4,695 mm) long, which is the main measurement for ordering film. A single body style keeps the panel count steady from one car to the next.

Efini MS-6 wrap ideas start with the tailgate, where the rear glass is set into the panel. The film ends at the edge of the glass, so the installer trims around it carefully. Door handles, mirrors, and badges also need cut-outs or removal before the film goes on.

How much vinyl to wrap an Efini MS-6 depends on the film type and the condition of the paint. A plain color change wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) film on a straight body. Chrome or patterned film needs about 69 ft (21 m) because the pattern must be matched at the seams.

Questions about wrapping a Mazda Efini MS-6

How much vinyl does it take to wrap a Mazda Efini MS-6?

About 54 ft (16.5 m) of 60-inch (1.52 m) cast film wraps a Mazda Efini MS-6. Chrome or patterned film takes about 69 ft (21 m) because of pattern matching. The estimate is for the single hatchback body of the 1991–1994 generation.

Can I wrap only the hood or the roof of an Efini MS-6?

Yes, you can wrap only the hood or the roof of an Efini MS-6. Partial wrap options for this car include the roof, hood, and mirror caps. A smaller job lets you change one panel without ordering film for the whole body.

Is an Efini MS-6 hard to wrap?

An Efini MS-6 is not especially hard to wrap, but the tailgate adds work. The rear glass sits in the tailgate, so the film must end at the edge of the glass. The car is 184.8 in (4,695 mm) long, so a full wrap needs a large enough work area.

How many generations of the Efini MS-6 does this page cover?

This page covers one generation of the Efini MS-6. The generation was sold from 1991 to 1994 as a five-door hatchback. No other generations of the Efini MS-6 are in the catalog.