Wraps by car

Mazda Efini MS-9 wrap

The Mazda Efini MS-9 wrap page covers one generation of this full-size sedan, produced from 1991 to 1993. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 67 ft (20.5 m).

1generations16.5 mof film for a full wrap

Mazda Efini MS-9, first generation, factory photo
Mazda Efini MS-9, first generation. Factory color shown.

Mazda Efini MS-9 wrap colors and ideas

  • Efini MS-9 black wrap
  • Efini MS-9 white wrap
  • Efini MS-9 gray wrap
  • Efini MS-9 silver wrap
  • Efini MS-9 red wrap
  • Efini MS-9 blue wrap
  • Efini MS-9 green wrap
  • Efini MS-9 yellow wrap
  • Efini MS-9 orange wrap
  • Efini MS-9 purple wrap
  • Efini MS-9 pink wrap
  • Efini MS-9 teal wrap
  • Efini MS-9 brown wrap
  • Efini MS-9 gold wrap
  • Efini MS-9 chrome wrap
  • Efini MS-9 color shift wrap
  • Efini MS-9 carbon fiber wrap
  • Efini MS-9 camo and patterned wrap

How much vinyl to wrap a Mazda Efini MS-9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1993sedan (4 doors)193.9 in (4,925 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Efini MS-9 wrap cost factors

Efini MS-9 wrap cost depends on the size of the body and the amount of film in the estimate. A full wrap uses about 54 ft (16.5 m) for solid colors and 67 ft (20.5 m) for chrome or patterned film. Labor changes with panel straightness, cut-outs around trim, and how much disassembly is needed on a 1991–1993 car.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Efini MS-9 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Efini MS-9, first generation, factory photo
Factory color shown

1991–1993 Efini MS-9 sedan (first generation)

1991–1993sedan (4 doors)193.9 in (4,925 mm)

The first-generation Mazda Efini MS-9, built from 1991 to 1993, may have original or repainted panels after decades of use. Paint age affects adhesion because aged clear coat and resprayed areas hold vinyl differently. A test spot on each panel comes before a full wrap to check that the film bonds without lifting paint.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Efini MS-9

An Efini MS-9 chrome delete covers the window trim and badges with black film for a partial change. A partial wrap can do the roof, hood, or mirror caps as separate jobs that use less material than a full wrap. Paint protection film (PPF) as a clear film on the front end guards the hood and bumper from stones.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Efini MS-9: body, cut-outs and film

The Mazda Efini MS-9 vinyl wrap has to cover a long four-door sedan body. The car measures 193.9 in (4,925 mm) in length, so film is cut for large hood, roof, and quarter panels. A 60-inch (1.52 m) roll allows most panels to be wrapped without seams.

Efini MS-9 wrap ideas start with door handles, mirror caps, and badges that need cut-outs or removal. The body-colored trim along the doors and bumpers can stay on if the wrap is cut carefully around it. The front and rear lights are masked before film is applied over the surrounding panels.

How much vinyl to wrap an Efini MS-9 depends on the only body style offered between 1991 and 1993. This generation came as a sedan with four doors, so there are no wagon or coupe panels to compare. Film estimators use the full-size class and 193.9 in (4,925 mm) length to set the material quantity.

Questions about wrapping a Mazda Efini MS-9

How much vinyl does it take to wrap a Mazda Efini MS-9?

A Mazda Efini MS-9 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, the estimate rises to about 67 ft (20.5 m). This is for the one body style in the catalog, the 1991–1993 sedan.

Can I wrap only the hood or the roof of an Efini MS-9?

Yes, you can wrap only the hood or the roof of an Efini MS-9 as a partial wrap. The same partial wrap can cover mirror caps on their own. Each of these jobs uses less vinyl than the full 54 ft (16.5 m) estimate for the whole car.

Is an Efini MS-9 hard to wrap?

An Efini MS-9 is not especially hard to wrap, but its size and trim add work. The full-size sedan at 193.9 in (4,925 mm) means long film runs that are easier with two installers. Cut-outs around the window trim and badges, plus possible paint age on a 1991–1993 car, require extra care.

How many generations of the Efini MS-9 does this page cover?

This page covers one generation of the Mazda Efini MS-9. The first generation ran from 1991 to 1993 and was offered only as a four-door sedan. No other generations of the Efini MS-9 are in the catalog.