Wraps by car

Mazda Eunos 300 wrap

The Mazda Eunos 300 wrap page covers the single-generation, four-door mid-size sedan built from 1989 to 1992. A full vinyl wrap of this car takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Plan for about 62 ft (19 m) if you choose a chrome or patterned film that needs pattern matching.

1generations15.5 mof film for a full wrap

Mazda Eunos 300, first generation, factory photo
Mazda Eunos 300, first generation. Factory color shown.

Mazda Eunos 300 wrap colors and ideas

  • Eunos 300 black wrap
  • Eunos 300 white wrap
  • Eunos 300 gray wrap
  • Eunos 300 silver wrap
  • Eunos 300 red wrap
  • Eunos 300 blue wrap
  • Eunos 300 green wrap
  • Eunos 300 yellow wrap
  • Eunos 300 orange wrap
  • Eunos 300 purple wrap
  • Eunos 300 pink wrap
  • Eunos 300 teal wrap
  • Eunos 300 brown wrap
  • Eunos 300 gold wrap
  • Eunos 300 chrome wrap
  • Eunos 300 color shift wrap
  • Eunos 300 carbon fiber wrap
  • Eunos 300 camo and patterned wrap

How much vinyl to wrap a Mazda Eunos 300

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1992sedan (4 doors)179.1 in (4,550 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Eunos 300 wrap cost factors

The Eunos 300 wrap cost depends on the size, condition, and finish you choose. The car's 179.1 in (4,550 mm) length and four doors put it in a mid-size film bracket. Paint condition on a car from 1989–1992 may require extra prep, and chrome or patterned film adds about 20% more material.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Eunos 300 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Eunos 300, first generation, factory photo
Factory color shown

1989–1992 Eunos 300 sedan (first generation)

1989–1992sedan (4 doors)179.1 in (4,550 mm)

The first generation Mazda Eunos 300 (1989–1992) is the only body this page covers. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. Test the film on each panel type, because old clear coat and resprayed areas can lift differently.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Eunos 300

Partial wrap options for the Eunos 300 include the roof, hood, and mirror caps. An Eunos 300 chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) can be applied as a clear film on the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Eunos 300: body, cut-outs and film

For a Mazda Eunos 300 vinyl wrap, the sedan body and its 179.1 in (4,550 mm) length set the film plan. A full wrap falls into the mid-size range at about 51 ft (15.5 m) of 60-inch cast film. The four doors and long roof add panels, but the simple sedan shape keeps seams easy to hide.

Eunos 300 wrap ideas start with the trim and badges. The door handles, side moldings, and emblems come off for a clean wrap, and the window trim needs cut-outs or chrome delete. On a car of this age, some trim clips may be brittle, so budget time for careful removal.

If you count how much vinyl to wrap an Eunos 300, one generation simplifies the math. The 1989–1992 sedan uses about 51 ft (15.5 m) of 60-inch cast film for a standard color change. Add 11 ft (3.5 m) for chrome or patterned film because of waste from matching directional textures.

Questions about wrapping a Mazda Eunos 300

How much vinyl does it take to wrap a Mazda Eunos 300?

A Mazda Eunos 300 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl for a full wrap. This figure covers the one-generation mid-size sedan with normal waste. If you use chrome or patterned film, plan for about 62 ft (19 m) because of pattern matching.

Can I wrap only the hood or the roof of an Eunos 300?

Yes, you can wrap only the hood or the roof of an Eunos 300. A partial wrap on the roof, hood, or mirror caps is a smaller job that uses less film. A hood alone is roughly a quarter of the full-wrap area, and a roof panel is similar.

Is an Eunos 300 hard to wrap?

An Eunos 300 is not especially hard to wrap, but its age adds work. At 179.1 in (4,550 mm) long, it is a straightforward mid-size sedan with four doors. The trim and badges need removal, and old paint may need a test spot before wrapping.

How many generations of the Eunos 300 does this page cover?

One generation of the Eunos 300 is covered on this page. It is the first generation sedan built from 1989 to 1992, the only body style offered.