Wraps by car

Mazda Lantis wrap

The Mazda Lantis wrap page covers one generation of this compact car and the vinyl wrap it takes. The first generation was made from 1993 to 1997 as a hatchback and a sedan. A full wrap of the newest body uses about 49 ft (15 m) of 60-inch film on the hatchback. The sedan needs slightly more film at around 51 ft (15.5 m).

1generations15.5 mof film for a full wrap

Mazda Lantis, first generation, factory photo
Mazda Lantis, first generation. Factory color shown.

Mazda Lantis wrap colors and ideas

  • Lantis black wrap
  • Lantis white wrap
  • Lantis gray wrap
  • Lantis silver wrap
  • Lantis red wrap
  • Lantis blue wrap
  • Lantis green wrap
  • Lantis yellow wrap
  • Lantis orange wrap
  • Lantis purple wrap
  • Lantis pink wrap
  • Lantis teal wrap
  • Lantis brown wrap
  • Lantis gold wrap
  • Lantis chrome wrap
  • Lantis color shift wrap
  • Lantis carbon fiber wrap
  • Lantis camo and patterned wrap

How much vinyl to wrap a Mazda Lantis

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–1997hatchback, sedan (4 or 5 doors)167.1 in (4,245 mm) to 176.8 in (4,490 mm)about 49 ft (15 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Lantis wrap cost factors

Lantis wrap cost depends on body style, film choice and how much of the car is covered. A full wrap of the hatchback uses about 49 ft (15 m) of 60-inch cast film, while the sedan uses about 51 ft (15.5 m). Chrome or patterned film can push the amount up to about 62 ft (19 m). A partial job on the hood or roof uses less film and less labour.

  • Film for a full wrap: about 49 ft (15 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Lantis wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Lantis, first generation, factory photo
Factory color shown

1993–1997 Lantis hatchback, sedan (first generation)

1993–1997hatchback, sedan (4 or 5 doors)167.1 in (4,245 mm) to 176.8 in (4,490 mm)

The first generation Mazda Lantis came as a hatchback and a sedan with four or five doors. The style decides the panel plan and the film amount from the start. The hatchback has one large tailgate, while the sedan has a separate trunk lid and longer rear quarters. Wrap patterns are cut to each style, so the film estimate changes by a few feet.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Lantis

A partial wrap on a Mazda Lantis covers the roof, hood or mirror caps only. A Lantis chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Lantis: body, cut-outs and film

A Mazda Lantis vinyl wrap starts with the body style you drive. The hatchback and the sedan share the same front doors and hood, but the rear panels differ. The sedan is longer at 176.8 in (4,490 mm), which adds film on the rear quarters and trunk. The hatchback measures 167.1 in (4,245 mm) and has one large tailgate to cover.

Lantis wrap ideas often begin with the tailgate because the rear glass sits inside it. The film ends at the edge of the glass, so the tailgate becomes one smooth panel. Door handles need cut-outs and are best removed for a clean edge. The bumpers stay on the car and are wrapped in place with relief cuts.

If you count how much vinyl to wrap a Lantis, there is only one generation to check. The hatchback takes about 49 ft (15 m) of 60-inch cast film for a full color change. The sedan takes about 51 ft (15.5 m) of the same film because of its longer rear body. Chrome or patterned film needs up to about 62 ft (19 m) on either style.

Questions about wrapping a Mazda Lantis

How much vinyl does it take to wrap a Mazda Lantis?

It takes about 49 ft (15 m) to 51 ft (15.5 m) of 60-inch film to wrap a Mazda Lantis. The hatchback uses about 49 ft (15 m) and the sedan about 51 ft (15.5 m). Those numbers are for a full color change with cast film. Chrome or patterned film can take up to about 62 ft (19 m).

Which Lantis body takes more film?

The sedan takes more film than the hatchback. A Lantis sedan uses about 51 ft (15.5 m) of 60-inch cast film, while the hatchback uses about 49 ft (15 m). The sedan is longer at 176.8 in (4,490 mm), so the rear quarters and trunk add surface area.

Can I wrap only the hood or the roof of a Lantis?

Yes, you can wrap only the hood or the roof of a Lantis. A partial wrap on this car commonly covers the roof, hood or mirror caps. You can also choose a chrome delete for the window trim and badges. Paint protection film is another partial option for the front end.

Is a Lantis hard to wrap?

A Lantis is not hard to wrap, but the tailgate adds one extra step. The rear glass is set inside the tailgate, so the film ends at the edge of the glass. That means a precise cut around the glass on every hatchback model. The compact size also means fewer large panels than on a longer sedan.