Wraps by car

Mazda Millenia wrap

The Mazda Millenia wrap covers the full-size sedan produced from 1994 to 2003 in a single generation. A full vinyl wrap of this body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 67 ft (20.5 m).

1generations18 mof film for a full wrap

Mazda Millenia, first generation, factory photo
Mazda Millenia, first generation. Factory color shown.

Mazda Millenia wrap colors and ideas

  • Millenia black wrap
  • Millenia white wrap
  • Millenia gray wrap
  • Millenia silver wrap
  • Millenia red wrap
  • Millenia blue wrap
  • Millenia green wrap
  • Millenia yellow wrap
  • Millenia orange wrap
  • Millenia purple wrap
  • Millenia pink wrap
  • Millenia teal wrap
  • Millenia brown wrap
  • Millenia gold wrap
  • Millenia chrome wrap
  • Millenia color shift wrap
  • Millenia carbon fiber wrap
  • Millenia camo and patterned wrap

How much vinyl to wrap a Mazda Millenia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2003sedan (4 doors)189.8 in (4,820 mm) to 190.0 in (4,825 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Millenia wrap cost factors

Millenia wrap cost depends on the film type, the amount of disassembly, and the condition of the paint. This sedan needs about 59 ft (18 m) of cast film for a full color change. Chrome or patterned film raises material needs to about 67 ft (20.5 m). Labor changes with the level of trim removal and surface preparation.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2000: bumpers and lights differ between the versions, and so do the film cuts.

Millenia wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Millenia, first generation, factory photo
Factory color shown

1994–2003 Millenia sedan (first generation)

1994–2003sedan (4 doors)189.8 in (4,820 mm) to 190.0 in (4,825 mm)

The first generation Mazda Millenia ran from 1994 to 2003 with a restyling in 2000. Bumpers and lights changed at that point, so film cut for one version does not fit the other. The sedan body kept the same overall length of 189.8 in (4,820 mm) to 190.0 in (4,825 mm).

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Millenia

A partial wrap on a Millenia can cover the roof, hood, or mirror caps. Millenia chrome delete works well for the window trim and badges. Paint protection film (PPF) in clear is often applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Millenia: body, cut-outs and film

A Mazda Millenia vinyl wrap must account for the sedan body that measures 189.8 in (4,820 mm) to 190.0 in (4,825 mm) long. This full-size four-door shape means long roof and side panels. The hood, trunk, and all four doors are within the standard width of 60-inch film. Only the lower rocker areas need extra material.

Millenia wrap ideas begin with removing the door handles, mirrors, and badges for clean edges. The front and rear bumpers need relief cuts around lights and grille openings. The window trim and badges are typical sites for chrome delete with black film. The antenna base and side moldings must be worked around or removed.

Knowing how much vinyl to wrap a Millenia means checking the production year because the 2000 restyling changed bumpers and lights. Film cut for early years does not fit the revised nose and tail. The overall length stays close, but the bumper shapes differ enough to affect material usage.

Questions about wrapping a Mazda Millenia

How much vinyl does it take to wrap a Mazda Millenia?

A Mazda Millenia takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film requires about 67 ft (20.5 m). These figures cover the sedan body with no extra for mistakes.

Which years of the Millenia take the same film cuts?

The Millenia years 1994 to 1999 share the same film cuts, and 2000 to 2003 share the revised cuts. The restyling in 2000 altered the bumpers and lights. A film kit for one period does not fit the other.

Can I wrap only the hood or the roof of a Millenia?

Yes, you can wrap only the hood or the roof of a Millenia. Partial wraps are common for the roof, hood, and mirror caps. These areas take far less film than a full sedan wrap.

Is a Millenia hard to wrap?

A Millenia is not especially hard to wrap, but the long roof and bumpers add work. The 2000 restyling means two different bumper shapes across the generation. Door handles, mirrors, and badges should be removed for a clean install.