Wraps by car

Mazda MX-3 wrap

The Mazda MX-3 wrap page covers this small sports car from a single generation lasting from 1991 to 2000. The coupe body has two doors and a length of 166.1 in (4,220 mm). A full vinyl wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Mazda MX-3, first generation, factory photo
Mazda MX-3, first generation. Factory color shown.

Mazda MX-3 wrap colors and ideas

  • Mazda MX-3 black wrap
  • Mazda MX-3 white wrap
  • Mazda MX-3 gray wrap
  • Mazda MX-3 silver wrap
  • Mazda MX-3 red wrap
  • Mazda MX-3 blue wrap
  • Mazda MX-3 green wrap
  • Mazda MX-3 yellow wrap
  • Mazda MX-3 orange wrap
  • Mazda MX-3 purple wrap
  • Mazda MX-3 pink wrap
  • Mazda MX-3 teal wrap
  • Mazda MX-3 brown wrap
  • Mazda MX-3 gold wrap
  • Mazda MX-3 chrome wrap
  • Mazda MX-3 color shift wrap
  • Mazda MX-3 carbon fiber wrap
  • Mazda MX-3 camo and patterned wrap

How much vinyl to wrap a Mazda MX-3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–2000coupe (2 doors)166.1 in (4,220 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Mazda MX-3 wrap cost factors

The Mazda MX-3 wrap cost depends on the film type, the number of panels, and the paint condition. The car is small at 166.1 in (4,220 mm), so a full wrap uses about 46 ft (14 m) of film. Cast film costs more than calendar film but stretches better on the curved bumpers. Old or repainted panels add preparation work before the vinyl goes on.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mazda MX-3 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda MX-3, first generation, factory photo
Factory color shown

1991–2000 Mazda MX-3 coupe (first generation)

1991–2000coupe (2 doors)166.1 in (4,220 mm)

The first generation Mazda MX-3 from 1991–2000 is the only generation in this catalog. Paint age matters on any car this old: panels may be original or repainted. A test spot on the paint before a full wrap shows if the vinyl will lift old clear coat. It is safer to test on a small area than to rewrap a panel later.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Mazda MX-3

A partial wrap on a Mazda MX-3 can be the roof, the hood, or the mirror caps. For a chrome delete, wrap the window trim and badges with black film. Paint protection film (PPF) works well on the front end, covering the hood edge and bumper from stone chips. Each small job uses less film than the full 46 ft (14 m) estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda MX-3: body, cut-outs and film

The Mazda MX-3 vinyl wrap is a compact job thanks to the car's small coupe shape. The body is 166.1 in (4,220 mm) long, which keeps the side panels short. The two long doors are nearly full-height, so each one uses a single large piece of film. A wrap installer can plan the whole car with fewer seams than on a longer sedan.

For Mazda MX-3 wrap ideas, the two long doors are the main flat areas to cover. Each door takes one large piece of film, and the side mirrors come off for a cleaner edge. The door handles and keyholes need cut-outs, but the bumpers stay on. The roof and hood are small enough to wrap in one piece each.

When counting how much vinyl to wrap a Mazda MX-3, the single generation from 1991–2000 has one body style. Since all years share the same coupe shape, the film estimate stays the same. A full wrap needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 51 ft (15.5 m) because of pattern matching.

Questions about wrapping a Mazda MX-3

How much vinyl does it take to wrap a Mazda MX-3?

A Mazda MX-3 needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, you need about 51 ft (15.5 m) to match the pattern. The coupe is small, so the film estimate is lower than for a sedan.

Can I wrap only the hood or the roof of a Mazda MX-3?

Yes, you can wrap only the hood or the roof of a Mazda MX-3. These are the most common small jobs on this car, along with the mirror caps. A partial wrap uses far less film than the full 46 ft (14 m) needed for the whole body.

Is a Mazda MX-3 hard to wrap?

No, a Mazda MX-3 is not hard to wrap, but the long doors add a step. Each door is one large piece of film, which needs two people to handle without wrinkles. The small size of the car, at 166.1 in (4,220 mm), keeps the other panels simple.

How many generations of the Mazda MX-3 does this page cover?

This page covers one generation of the Mazda MX-3, built from 1991 to 2000. The car stayed as a two-door coupe for its whole run, so there are no other body styles.