Wraps by car

Mazda MX-6 wrap

A Mazda MX-6 wrap covers the mid-size coupe produced from 1992 to 1997 in one generation. This page details the vinyl wrap for the GE-series Mazda MX-6, a two-door body that is about 181.5 in (4,610 mm) long. A full wrap of this body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned vinyl, plan on about 56 ft (17 m) of the same width.

1generations15.5 mof film for a full wrap

Mazda MX-6, first generation, factory photo
Mazda MX-6, first generation. Factory color shown.

Mazda MX-6 wrap colors and ideas

  • Mazda MX-6 black wrap
  • Mazda MX-6 white wrap
  • Mazda MX-6 gray wrap
  • Mazda MX-6 silver wrap
  • Mazda MX-6 red wrap
  • Mazda MX-6 blue wrap
  • Mazda MX-6 green wrap
  • Mazda MX-6 yellow wrap
  • Mazda MX-6 orange wrap
  • Mazda MX-6 purple wrap
  • Mazda MX-6 pink wrap
  • Mazda MX-6 teal wrap
  • Mazda MX-6 brown wrap
  • Mazda MX-6 gold wrap
  • Mazda MX-6 chrome wrap
  • Mazda MX-6 color shift wrap
  • Mazda MX-6 carbon fiber wrap
  • Mazda MX-6 camo and patterned wrap

How much vinyl to wrap a Mazda MX-6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1997coupe (2 doors)181.5 in (4,610 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Mazda MX-6 wrap cost factors

A Mazda MX-6 wrap cost depends on the size of the car, the condition of its paint, and the film you choose. The MX-6 is a mid-size coupe at 181.5 in (4,610 mm) long, so it uses more film than a small hatchback. Paint condition on 1992-1997 cars can vary between original and repainted panels, which affects how much prep work is needed before the vinyl can be applied. A chrome or patterned film adds material and labor because the installer must align the pattern across every panel.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mazda MX-6 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda MX-6, first generation, factory photo
Factory color shown

1992–1997 Mazda MX-6 coupe (first generation)

1992–1997coupe (2 doors)181.5 in (4,610 mm)

The first generation Mazda MX-6 was built from 1992 to 1997 as a mid-size coupe with two doors. Over those years, the paint on these cars may be original, faded, or repainted, and a test spot comes before a full wrap to check adhesion. The body is 181.5 in (4,610 mm) long, and a full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. With aged paint, the installer will deep clean and sometimes clay the surface before applying the vinyl.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Mazda MX-6

For a partial wrap on a Mazda MX-6, the roof, hood, or mirror caps can be covered in vinyl without wrapping the whole car. A chrome delete on the MX-6 replaces the bright window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs are useful when only a section of the 1992-1997 Mazda MX-6 needs a color change or protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda MX-6: body, cut-outs and film

The Mazda MX-6 vinyl wrap is shaped by the car's single coupe body style with two long doors. Because each door is one large piece of film, a color change wrap on an MX-6 needs long, uninterrupted sheets of vinyl. The overall length of 181.5 in (4,610 mm) is typical for a mid-size coupe, so the roof and rear quarters do not add unusual material. A full wrap of the Mazda MX-6 therefore calls for about 51 ft (15.5 m) of standard 60-inch (1.52 m) cast film.

Mazda MX-6 wrap ideas for this body include covering the large side doors or adding a contrasting roof panel. The two long side doors create a smooth canvas for a design that runs from front fender to rear quarter. No parts of the Mazda MX-6 need to be removed for a full wrap, but the badges and window trim can be wrapped in black film for a chrome delete. The 1992-1997 MX-6 has no separate front or rear spoilers from the factory, so film edges at the bumpers need careful trimming.

How much vinyl to wrap a Mazda MX-6 changes only with the film's finish, not with different generations. This page covers the single generation built from 1992 to 1997, so every Mazda MX-6 wrap uses the same panel sizes. A full wrap of the GE-series MX-6 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 56 ft (17 m) because the pattern must be matched at seams.

Questions about wrapping a Mazda MX-6

How much vinyl does it take to wrap a Mazda MX-6?

A full wrap of a Mazda MX-6 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned vinyl, the amount is about 56 ft (17 m) because the pattern must match at the seams. These figures are for the single generation built from 1992 to 1997.

Can I wrap only the hood or the roof of a Mazda MX-6?

Yes, you can wrap only the hood or the roof of a Mazda MX-6. The partial jobs for this car include the roof, hood, mirror caps, chrome delete on the window trim and badges, and clear paint protection film on the front end. A roof or hood wrap is a practical way to change one panel without a full color change.

Is a Mazda MX-6 hard to wrap?

A Mazda MX-6 is not especially hard to wrap, but its two long side doors add some work. Each door is one large piece of film that must be handled without creasing. The overall length of 181.5 in (4,610 mm) is normal for a mid-size coupe, so the roof and bumpers are straightforward. The main challenge is aligning the vinyl cleanly over the long, flat door surfaces.

How many generations of the Mazda MX-6 does this page cover?

This page covers one generation of the Mazda MX-6, built from 1992 to 1997. That single generation includes only the two-door coupe body style. A full wrap of that body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.