Wraps by car

Mazda Proceed Marvie wrap

The Mazda Proceed Marvie wrap page covers one generation of this SUV, built from 1991 to 1999. A full vinyl wrap of the first generation takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The body is a five-door SUV with a tall, boxy shape. This guide explains the wrap process for the Proceed Marvie.

1generations20 mof film for a full wrap

Mazda Proceed Marvie, first generation, factory photo
Mazda Proceed Marvie, first generation. Factory color shown.

Mazda Proceed Marvie wrap colors and ideas

  • Proceed Marvie black wrap
  • Proceed Marvie white wrap
  • Proceed Marvie gray wrap
  • Proceed Marvie silver wrap
  • Proceed Marvie red wrap
  • Proceed Marvie blue wrap
  • Proceed Marvie green wrap
  • Proceed Marvie yellow wrap
  • Proceed Marvie orange wrap
  • Proceed Marvie purple wrap
  • Proceed Marvie pink wrap
  • Proceed Marvie teal wrap
  • Proceed Marvie brown wrap
  • Proceed Marvie gold wrap
  • Proceed Marvie chrome wrap
  • Proceed Marvie color shift wrap
  • Proceed Marvie carbon fiber wrap
  • Proceed Marvie camo and patterned wrap

How much vinyl to wrap a Mazda Proceed Marvie

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1999SUV (5 doors)196.5 in (4,990 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Proceed Marvie wrap cost factors

The Proceed Marvie wrap cost depends on the film type, the size of the body, and the amount of trim work. A full wrap of this SUV uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. The tall roof needs a platform, which adds labor time. Removing badges and wrapping the tailgate around the glass also affects the final cost.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (71.5 in (1,815 mm)): the roof is wrapped from a platform.

Proceed Marvie wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Proceed Marvie, first generation, factory photo
Factory color shown

1991–1999 Proceed Marvie SUV (first generation)

1991–1999SUV (5 doors)196.5 in (4,990 mm)

The first generation Mazda Proceed Marvie is a tall SUV with a body height of 71.5 in (1,815 mm). The roof is wrapped from a platform, which adds time and care to the job. The body is 196.5 in (4,990 mm) long, so large side panels are installed in one piece. The tailgate glass requires the film to stop at its edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (71.5 in (1,815 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Proceed Marvie

A partial wrap on a Proceed Marvie can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Proceed Marvie: body, cut-outs and film

The Mazda Proceed Marvie vinyl wrap follows the large, flat panels of a full-size SUV body. The body is 196.5 in (4,990 mm) long and 71.5 in (1,815 mm) tall, so the roof area adds material. A five-door layout means four door handles and a tailgate to work around. The tall sides allow long, continuous pieces of film with fewer seams.

Proceed Marvie wrap ideas start with planning cut-outs for the door handles, badges, and the tailgate glass. The tailgate has the rear glass set into it, so the film ends at the edge of the glass. The tall roof is wrapped from a platform, which takes extra time. Mirrors and window trim are small parts that can be wrapped separately.

To work out how much vinyl to wrap a Proceed Marvie, use the first-generation body as the only reference. This page lists one generation, so there is no change in film amount between model years. The estimate of about 66 ft (20 m) of 60-inch (1.52 m) cast film covers a full color change. Adding chrome or patterned film raises the amount to about 82 ft (25 m).

Questions about wrapping a Mazda Proceed Marvie

How much vinyl does it take to wrap a Mazda Proceed Marvie?

Yes, a Mazda Proceed Marvie takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. That amount is for the first-generation SUV body. If you use chrome or patterned film, plan for about 82 ft (25 m). The tall roof and long body are included in that estimate.

Can I wrap only the hood or the roof of a Proceed Marvie?

Yes, you can wrap only the hood or the roof of a Proceed Marvie. A partial wrap may also cover the mirror caps or a chrome delete on the window trim and badges. Paint protection film (PPF) can be applied to just the front end. Each of these jobs uses less film than a full wrap.

Is a Proceed Marvie hard to wrap?

A Proceed Marvie is not the easiest car to wrap because of its tall body and tailgate glass. The roof is 71.5 in (1,815 mm) high, so it must be wrapped from a platform. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The body is 196.5 in (4,990 mm) long, which adds time on the large panels.

How many generations of the Proceed Marvie does this page cover?

This page covers one generation of the Mazda Proceed Marvie. The first generation was built from 1991 to 1999. Only the five-door SUV body style is listed in the catalog.