Wraps by car

Mazda Proceed wrap

The Mazda Proceed wrap guide covers all five generations of this SUV, from the 1961–1965 first generation to the 1998–2006 fifth generation. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 70 ft (21.5 m).

5generations18.5 mof film for a full wrap

Mazda Proceed, fifth generation, factory photo
Mazda Proceed, fifth generation. Factory color shown.

Mazda Proceed wrap colors and ideas

  • Proceed black wrap
  • Proceed white wrap
  • Proceed gray wrap
  • Proceed silver wrap
  • Proceed red wrap
  • Proceed blue wrap
  • Proceed green wrap
  • Proceed yellow wrap
  • Proceed orange wrap
  • Proceed purple wrap
  • Proceed pink wrap
  • Proceed teal wrap
  • Proceed brown wrap
  • Proceed gold wrap
  • Proceed chrome wrap
  • Proceed color shift wrap
  • Proceed carbon fiber wrap
  • Proceed camo and patterned wrap

How much vinyl to wrap a Mazda Proceed

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2006pickup (2 or 4 doors)184.5 in (4,686 mm) to 202.7 in (5,149 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1985–1998pickup (2 doors)196.7 in (4,995 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1977–1985pickup (2 or 4 doors)175.0 in (4,445 mm) to 186.6 in (4,740 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1965–1977pickup (2 doors)172.0 in (4,370 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1961–1965pickup, van (2 or 3 doors)163.4 in (4,150 mm) to 167.1 in (4,245 mm)about 52 ft (16 m) for the pickup to 62 ft (19 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Proceed wrap cost factors

Proceed wrap cost depends on the size of the chosen body and the extra work from the pickup bed, the side doors, or the sliding door tracks. A fifth generation pickup needs about 61 ft (18.5 m) of film, while a first generation van can use up to 62 ft (19 m). The number of cut-outs for handles, badges, and mirror caps also affects the labor. Overall cost follows the film amount and the time on the body’s hardest areas.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: pickup (2 or 4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Proceed wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Proceed, fifth generation, factory photo
Factory color shown

1998–2006 Proceed pickup (fifth generation)

1998–2006pickup (2 or 4 doors)184.5 in (4,686 mm) to 202.7 in (5,149 mm)

The fifth generation Mazda Proceed is a pickup with a bed, so the cab and the bed are wrapped as two bodies for the film. The inside of the bed stays bare, which keeps the wrap coverage on the outside surfaces only. This generation runs from 1998 to 2006 with two or four doors, adding door cut lines. The wrap estimate is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Mazda Proceed, fourth generation, factory photo
Factory color shown

1985–1998 Proceed pickup (fourth generation)

1985–1998pickup (2 doors)196.7 in (4,995 mm)

On a fourth generation Proceed from 1985 to 1998, paint age may mean panels are original or repainted, and a test spot comes before a full wrap. The two long side doors are each wrapped as one large piece of film, which shows any surface flaw underneath. This pickup also has a bed that is wrapped separately from the cab. The estimate for this generation is about 61 ft (18.5 m) of cast film.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Mazda Proceed, third generation, factory photo
Factory color shown

1977–1985 Proceed pickup (third generation)

1977–1985pickup (2 or 4 doors)175.0 in (4,445 mm) to 186.6 in (4,740 mm)

The third generation Proceed is a compact pickup with a length of 175.0 in (4,445 mm) to 186.6 in (4,740 mm) and a bed that increases the panel count. The cab and the bed are wrapped as two bodies, so the film amount covers both sections separately. This generation from 1977 to 1985 uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The shorter body means fewer square feet than the later generations.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Mazda Proceed, second generation, factory photo
Factory color shown

1965–1977 Proceed pickup (second generation)

1965–1977pickup (2 doors)172.0 in (4,370 mm)

The second generation Proceed from 1965 to 1977 is a two-door pickup with a length of 172.0 in (4,370 mm) and a bed that adds a second wrap section. Two long side doors are each covered with one large piece of film, which reduces seams on the cab. The film estimate is about 52 ft (16 m) of 60-inch (1.52 m) cast film. The smaller body keeps the total film amount lower than on later pickups.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Mazda Proceed, first generation, factory photo
Factory color shown

1961–1965 Proceed pickup, van (first generation)

1961–1965pickup, van (2 or 3 doors)163.4 in (4,150 mm) to 167.1 in (4,245 mm)

The first generation Mazda Proceed offered a van with sliding side doors, and the tracks stay bare to decide where the film is cut. Installers must cut the film along the track lines and avoid covering the sliding mechanism. This generation from 1961 to 1965 also included a pickup with a bed that is wrapped separately. The van body can take up to about 62 ft (19 m) of cast film.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 52 ft (16 m) for the pickup to 62 ft (19 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Proceed

A partial wrap on a Proceed can cover the roof, hood, or mirror caps as separate jobs without wrapping the whole body. Proceed chrome delete works on the window trim and badges, turning bright metal into a black satin or gloss finish. Paint protection film (PPF) is a clear option for the front end to guard against stone chips. Each of these jobs uses less film than a full wrap and focuses on high-wear areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Proceed: body, cut-outs and film

A Mazda Proceed vinyl wrap is planned around the pickup body styles and the lengths that range from 163.4 in (4,150 mm) to 202.7 in (5,149 mm) across generations. The pickup cab and the bed are wrapped as two separate bodies, so the installer handles more panels than on a one-piece SUV body. Two-door and four-door versions add door seams that change the number of pieces. The film estimate for each generation reflects these dimensional differences.

Proceed wrap ideas must include the pickup bed, because the cab and the bed are wrapped as two bodies and the inside of the bed stays bare. On generations with two long side doors, each door is one large piece of film that needs careful handling. The first generation van has sliding side doors, and the door tracks stay bare with the film cut along them. These details shape the layout of any wrap design.

To know how much vinyl to wrap a Proceed, compare the film estimates between generations and note the body style changes. The first generation offered a pickup and a van, with the van needing up to about 62 ft (19 m) of cast film, while the pickup used about 52 ft (16 m). The fifth generation pickup reaches 202.7 in (5,149 mm) in length and uses about 61 ft (18.5 m) of film. Counting film means matching the estimate to the specific body and year range.

Questions about wrapping a Mazda Proceed

How much vinyl does it take to wrap a Mazda Proceed?

To wrap a Mazda Proceed you need about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for the newest fifth generation pickup. Chrome or patterned film on that body takes about 70 ft (21.5 m). The bed is wrapped as a separate section, which adds to the total film compared to a single-body vehicle.

Is the bed of a Proceed wrapped?

No, the bed of a Proceed is not wrapped on the inside, but the outside of the bed is wrapped. The cab and the bed are treated as two bodies for the film, so both get coverage on their outer surfaces. The inside of the bed stays bare because it is a cargo area that sees heavy wear.

Can I wrap only the hood or the roof of a Proceed?

Yes, you can wrap only the hood or the roof of a Proceed as a partial wrap. A partial wrap can also include the mirror caps, and chrome delete covers the window trim and badges. Paint protection film is another targeted option for the front end, applied as a clear film.

Is a Proceed hard to wrap?

A Proceed is harder to wrap than a standard SUV because of the pickup bed, which divides the body into two sections. On generations with two long side doors, each door is one large piece of film that needs careful alignment. The first generation van has sliding side doors with tracks that stay bare, adding extra cutting work.