Wraps by car

Mazda Protege wrap

The Mazda Protege wrap page covers the compact sedan and hatchback across three generations, from 1989 to 2004. A Mazda Protege wrap uses vinyl film to change the color or finish of the car. The newest body, sold from 1998 to 2004, needs about 48 ft (14.5 m) of 60-inch (1.52 m) film for a full wrap.

3generations14.5 mof film for a full wrap

Mazda Protege, third generation, factory photo
Mazda Protege, third generation. Factory color shown.

Mazda Protege wrap colors and ideas

  • Protege black wrap
  • Protege white wrap
  • Protege gray wrap
  • Protege silver wrap
  • Protege red wrap
  • Protege blue wrap
  • Protege green wrap
  • Protege yellow wrap
  • Protege orange wrap
  • Protege purple wrap
  • Protege pink wrap
  • Protege teal wrap
  • Protege brown wrap
  • Protege gold wrap
  • Protege chrome wrap
  • Protege color shift wrap
  • Protege carbon fiber wrap
  • Protege camo and patterned wrap

How much vinyl to wrap a Mazda Protege

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2004hatchback, sedan (4 or 5 doors)165.4 in (4,200 mm) to 169.9 in (4,315 mm)about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1994–1999sedan (4 doors)170.7 in (4,335 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1989–1994sedan (4 doors)——

Protege wrap cost factors

Protege wrap cost is set by the film amount, the film type, and the labor on this car. A full wrap of the newest body takes about 48 ft (14.5 m) to 49 ft (15 m) of 60-inch (1.52 m) vinyl. Chrome or patterned film increases the material needed to about 61 ft (18.5 m). The condition of the paint and the number of removable parts also change the work time.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Protege wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Protege, third generation, factory photo
Factory color shown

1998–2004 Protege hatchback, sedan (third generation)

1998–2004hatchback, sedan (4 or 5 doors)165.4 in (4,200 mm) to 169.9 in (4,315 mm)

The third-generation Mazda Protege, made from 1998 to 2004, came as a hatchback or a sedan with four or five doors. The body style decides the panel plan and the film amount for a wrap. A hatchback has a large rear panel around the glass, so the film ends at the glass edge. A sedan has a separate trunk lid, which is easier to wrap as one piece.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Mazda Protege, second generation, factory photo
Factory color shown

1994–1999 Protege sedan (second generation)

1994–1999sedan (4 doors)170.7 in (4,335 mm)

The second-generation Mazda Protege, built from 1994 to 1999, is a four-door sedan only. These production years overlap with the third generation from 1998 to 1999, so the owner of a car from those years must check which body it is. The second generation is slightly longer at 170.7 in (4,335 mm). It takes about 49 ft (15 m) of 60-inch (1.52 m) film for a full wrap.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Mazda Protege, first generation, factory photo
Factory color shown

1989–1994 Protege sedan (first generation)

1989–1994sedan (4 doors)

The first-generation Mazda Protege, from 1989 to 1994, is the oldest body in this catalog. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. A test spot shows whether the vinyl will stick well to the old paint. If the paint is weak, the installer may need to do more prep work.

Roof, hood, chrome delete and PPF on a Protege

For a Protege chrome delete, the window trim and badges are covered with black film. A partial wrap on this car can cover the roof, the hood, or the mirror caps. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips. These jobs use less material than a full wrap, so the cost is lower and the work is faster.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Protege: body, cut-outs and film

A Mazda Protege vinyl wrap is planned around the body style and length, which vary by generation. The third-generation sedan runs 165.4 in (4,200 mm) to 169.9 in (4,315 mm) long, while the hatchback is similar in length. The second-generation sedan is slightly longer at 170.7 in (4,335 mm). These sizes mean a wrap uses nearly the same amount of film, about 48 to 49 ft (14.5 to 15 m).

Protege wrap ideas include covering the tailgate, which needs care because the glass is set into it. On the third-generation hatchback, the film ends at the edge of the rear glass. Door handles, mirrors, and trim pieces may be removed for a cleaner finish. Emblems and badges are also taken off before the vinyl goes on.

How much vinyl to wrap a Protege depends on which generation you have. The third generation, from 1998 to 2004, uses about 48 ft (14.5 m) for a sedan and 49 ft (15 m) for a hatchback with 60-inch (1.52 m) film. The second generation from 1994 to 1999 uses about 49 ft (15 m) of the same film. The first generation has no film estimate listed, so a shop measures the panels first.

Questions about wrapping a Mazda Protege

How much vinyl does it take to wrap a Mazda Protege?

A Mazda Protege full wrap takes about 48 ft (14.5 m) to 49 ft (15 m) of 60-inch (1.52 m) vinyl film. The sedan uses about 48 ft (14.5 m) and the hatchback about 49 ft (15 m). For chrome or patterned film, plan on up to 61 ft (18.5 m).

Which Protege body takes more film?

The Mazda Protege hatchback takes more film than the sedan in the third generation. The hatchback needs about 49 ft (15 m) of 60-inch (1.52 m) film, while the sedan needs about 48 ft (14.5 m). The difference is small because the two body styles are nearly the same length.

Can I wrap only the hood or the roof of a Protege?

Yes, you can wrap only the hood or the roof of a Mazda Protege. A partial wrap on this car often covers the roof, the hood, or the mirror caps. You can also get a chrome delete on the window trim and badges, or paint protection film (PPF) on the front end. These smaller jobs use less film than a full wrap.

Is a Protege hard to wrap?

A Mazda Protege has a few parts that add work to a wrap. The third-generation hatchback has a tailgate with the rear glass in it, so the film must end at the edge of the glass. Door handles, mirrors, and emblems need to be removed and reinstalled. The car is compact, so the panel sizes are manageable, but care is needed on the curves.