Wraps by car

Mazda R360 wrap

The Mazda R360 wrap page covers the first generation of this pioneering mini car, produced from 1960 to 1966. A full vinyl wrap of the two-door coupe body takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 5 ft (1.5 m), totaling about 36 ft (11 m).

1generations9.5 mof film for a full wrap

Mazda R360, first generation, factory photo
Mazda R360, first generation. Factory color shown.

Mazda R360 wrap colors and ideas

  • Mazda R360 black wrap
  • Mazda R360 white wrap
  • Mazda R360 gray wrap
  • Mazda R360 silver wrap
  • Mazda R360 red wrap
  • Mazda R360 blue wrap
  • Mazda R360 green wrap
  • Mazda R360 yellow wrap
  • Mazda R360 orange wrap
  • Mazda R360 purple wrap
  • Mazda R360 pink wrap
  • Mazda R360 teal wrap
  • Mazda R360 brown wrap
  • Mazda R360 gold wrap
  • Mazda R360 chrome wrap
  • Mazda R360 color shift wrap
  • Mazda R360 carbon fiber wrap
  • Mazda R360 camo and patterned wrap

How much vinyl to wrap a Mazda R360

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1960–1966coupe (2 doors)117.3 in (2,980 mm)about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m)

Mazda R360 wrap cost factors

Mazda R360 wrap cost depends on the condition of the body, the film type, and the size of the job. The car is 117.3 in (2,980 mm) long, so a full wrap takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the amount to about 36 ft (11 m), which raises material cost. Labor on the two long doors also affects the final amount.

  • Film for a full wrap: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mazda R360 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda R360, first generation, factory photo
Factory color shown

1960–1966 Mazda R360 coupe (first generation)

1960–1966coupe (2 doors)117.3 in (2,980 mm)

The first generation Mazda R360 was produced from 1960 to 1966 as a two-door coupe. On a car of these years the panels may be original or repainted. A test spot comes before a full wrap to check that the paint can hold the film. The body length of 117.3 in (2,980 mm) keeps the wrap area small.

Two long side doors: each door is one large piece of film.

Film: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m).

Roof, hood, chrome delete and PPF on a Mazda R360

A partial wrap on a Mazda R360 can cover the roof, hood, or mirror caps alone. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than the full 31 ft (9.5 m) estimate for a complete wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda R360: body, cut-outs and film

A Mazda R360 vinyl wrap starts with a small two-door coupe body measuring 117.3 in (2,980 mm) long. The compact size keeps the main body simple to cover with large film pieces. Each of the two long side doors is one large piece of film. Installers can wrap the roof and rear panel with single sheets as well.

Mazda R360 wrap ideas must account for the two long doors, which are the largest panels on the car. The door handles and locks need cut-outs, so the film is trimmed carefully around them. The front and rear bumpers are separate chrome parts that can be wrapped or left exposed. The window trim and badges are small parts that can be covered for a chrome delete.

How much vinyl to wrap a Mazda R360 depends on the body dimensions of this first generation. The coupe is the only body style, with a length of 117.3 in (2,980 mm). A standard color change wrap uses about 31 ft (9.5 m) of 60-inch (1.52 m) cast film. If the wrap includes chrome or patterned film, plan for about 36 ft (11 m).

Questions about wrapping a Mazda R360

How much vinyl does it take to wrap a Mazda R360?

It takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film to wrap a Mazda R360. Chrome or patterned film raises the amount to about 36 ft (11 m). The figure is for the first generation coupe body. The two long side doors are each one large piece of film.

Can I wrap only the hood or the roof of a Mazda R360?

Yes, you can wrap only the hood or the roof of a Mazda R360. Partial wraps on this car commonly cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges. Paint protection film is another partial option for the front end.

Is a Mazda R360 hard to wrap?

The Mazda R360 is not hard to wrap because of its small size and simple shape. The two long side doors are each one large piece of film, which makes them straightforward to cover. Door handles and locks need cut-outs. The bumpers are separate chrome parts that can be wrapped or left exposed.

How many generations of the Mazda R360 does this page cover?

This page covers one generation of the Mazda R360. The first generation was produced from 1960 to 1966. The only body style is a two-door coupe. The wrap estimate is based on that body.