Wraps by car

Mazda RX-7 wrap

This page covers vinyl wrap for the Mazda RX-7 sports car across three generations. The newest body is the third generation, produced from 1992 to 2002. A full wrap of that body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

3generations14 mof film for a full wrap

Mazda RX-7, third generation, factory photo
Mazda RX-7, third generation. Factory color shown.

Mazda RX-7 wrap colors and ideas

  • Mazda RX-7 black wrap
  • Mazda RX-7 white wrap
  • Mazda RX-7 gray wrap
  • Mazda RX-7 silver wrap
  • Mazda RX-7 red wrap
  • Mazda RX-7 blue wrap
  • Mazda RX-7 green wrap
  • Mazda RX-7 yellow wrap
  • Mazda RX-7 orange wrap
  • Mazda RX-7 purple wrap
  • Mazda RX-7 pink wrap
  • Mazda RX-7 teal wrap
  • Mazda RX-7 brown wrap
  • Mazda RX-7 gold wrap
  • Mazda RX-7 chrome wrap
  • Mazda RX-7 color shift wrap
  • Mazda RX-7 carbon fiber wrap
  • Mazda RX-7 camo and patterned wrap

How much vinyl to wrap a Mazda RX-7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–2002coupe (2 doors)168.7 in (4,285 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1985–1991coupe (2 doors)169.9 in (4,315 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1979–1986coupe (2 doors)168.7 in (4,285 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Mazda RX-7 wrap cost factors

The Mazda RX-7 wrap cost depends on film choice and the amount of disassembly. A full wrap uses about 46 ft (14 m) of cast film, while chrome or patterned film needs about 52 ft (16 m). The two long doors add labor because each panel is large. Paint condition also matters: an older car may need more prep work.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mazda RX-7 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda RX-7, third generation, factory photo
Factory color shown

1992–2002 Mazda RX-7 coupe (third generation)

1992–2002coupe (2 doors)168.7 in (4,285 mm)

The third generation Mazda RX-7 was built from 1992 to 2002 as a two-door coupe. Paint age on a car of these years may be original or repainted. A test spot comes before a full wrap to check adhesion on the existing paint. This generation is the newest body covered on this page.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Mazda RX-7, second generation, factory photo
Factory color shown

1985–1991 Mazda RX-7 coupe (second generation)

1985–1991coupe (2 doors)169.9 in (4,315 mm)

The second generation Mazda RX-7, from 1985 to 1991, is also a two-door coupe. Its size is 169.9 in (4,315 mm) long, which is close to the other generations. The amount of film remains about 46 ft (14 m) of 60-inch (1.52 m) cast film. The number of panels is the same because the body style has not changed.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Mazda RX-7, first generation, factory photo
Factory color shown

1979–1986 Mazda RX-7 coupe (first generation)

1979–1986coupe (2 doors)168.7 in (4,285 mm)

The first generation Mazda RX-7 covers 1979 to 1986, overlapping with the newer body from 1985 to 1986. The owner of a car from those years checks which body it is by looking at the shape and the VIN. This generation is also a two-door coupe with the same film estimate of about 46 ft (14 m).

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Mazda RX-7

A partial wrap on a Mazda RX-7 can cover the roof, hood, or mirror caps. Chrome delete is another option, covering window trim and badges with black film. Paint protection film (PPF) is a clear layer on the front end to guard against stone chips. These jobs use less film than a full wrap and allow more budget control.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda RX-7: body, cut-outs and film

The Mazda RX-7 has a single coupe body style with two long side doors. At 168.7 in (4,285 mm) long, the third generation is a compact car to wrap. Each door is one large piece of film, so installers need wide panels and careful handling.

For a clean look, common Mazda RX-7 wrap ideas include removing door handles and mirrors before installation. The two long doors require film that is wide enough to cover each panel in one piece. Badges and trim are usually removed to avoid cut edges.

To know how much vinyl to wrap a Mazda RX-7, compare the three generations. All three bodies are similar in length, around 168.7 in (4,285 mm) for the first and third generations. The second generation is slightly longer at 169.9 in (4,315 mm). Film estimates are the same for all generations: about 46 ft (14 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Mazda RX-7

How much vinyl does it take to wrap a Mazda RX-7?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a Mazda RX-7. That figure is for a full wrap of the third generation, the newest body. Chrome or patterned film needs about 52 ft (16 m) because of pattern matching. The first and second generations use the same amount of film since their bodies are similar in size and shape.

Can I wrap only the hood or the roof of a Mazda RX-7?

Yes, you can wrap only the hood or the roof of a Mazda RX-7. A partial wrap is a smaller job that uses less film than a full wrap. Other common partial areas are mirror caps. Chrome delete covers window trim and badges with black film.

Is a Mazda RX-7 hard to wrap?

A Mazda RX-7 is not hard to wrap, but it has some challenges. The two long side doors each need one large piece of film. The car is small at 168.7 in (4,285 mm) long, which helps with film handling. Removing door handles and mirrors adds time but gives a cleaner result.

How many generations of the Mazda RX-7 does this page cover?

This page covers three generations of the Mazda RX-7. They are the first generation (1979–1986), the second generation (1985–1991), and the third generation (1992–2002). All generations are two-door coupes with similar dimensions and film requirements.