Wraps by car

Mazda RX-8 wrap

The Mazda RX-8 wrap guide covers one generation built from 2003 to 2012. A full wrap of the coupe body uses about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap. This page lists the cut-outs, the body styles, and the smaller wrap jobs for this sports car.

1generations15 mof film for a full wrap

Mazda RX-8, first generation, factory photo
Mazda RX-8, first generation. Factory color shown.

Mazda RX-8 wrap colors and ideas

  • Mazda RX-8 black wrap
  • Mazda RX-8 white wrap
  • Mazda RX-8 gray wrap
  • Mazda RX-8 silver wrap
  • Mazda RX-8 red wrap
  • Mazda RX-8 blue wrap
  • Mazda RX-8 green wrap
  • Mazda RX-8 yellow wrap
  • Mazda RX-8 orange wrap
  • Mazda RX-8 purple wrap
  • Mazda RX-8 pink wrap
  • Mazda RX-8 teal wrap
  • Mazda RX-8 brown wrap
  • Mazda RX-8 gold wrap
  • Mazda RX-8 chrome wrap
  • Mazda RX-8 color shift wrap
  • Mazda RX-8 carbon fiber wrap
  • Mazda RX-8 camo and patterned wrap

How much vinyl to wrap a Mazda RX-8

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2012coupe (2 doors)174.4 in (4,430 mm) to 175.6 in (4,460 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Mazda RX-8 wrap cost factors

The Mazda RX-8 wrap cost depends on the film brand, the finish, and the shop's labor rate. This coupe is a small sports car, so a full wrap uses about 49 ft (15 m) of cast film. A chrome or patterned vinyl raises the film amount to about 61 ft (18.5 m). Removing the fog lamps, door handles, and trim adds time, which changes the labor part of the cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2008: bumpers and lights differ between the versions, and so do the film cuts.

Mazda RX-8 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda RX-8, first generation, factory photo
Factory color shown

2003–2012 Mazda RX-8 coupe (first generation)

2003–2012coupe (2 doors)174.4 in (4,430 mm) to 175.6 in (4,460 mm)

The first generation Mazda RX-8 was built from 2003 to 2012 and got a restyling in 2008. That restyling changed the bumpers and lights, so film cut for one version does not fit the other. The body is a two-door coupe with the same length range across all years. A full wrap of this generation takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Mazda RX-8

A partial wrap on a Mazda RX-8 can cover the roof, hood, or mirror caps with less film than a full wrap. A Mazda RX-8 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can go on the front end to guard the paint. These smaller jobs let you change the look without wrapping the whole coupe.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda RX-8: body, cut-outs and film

The Mazda RX-8 vinyl wrap has to fit a two-door coupe body that is 174.4 in (4,430 mm) to 175.6 in (4,460 mm) long. The long side doors are each one large piece of film, which calls for careful handling. Since the film is wide, one installer can lay the door panels without a seam. The compact body keeps the total film use close to 49 ft (15 m).

Mazda RX-8 wrap ideas must allow for fog lamps in the front bumper on every trim. The bumper film needs cut-outs around those lamps, so the wrap stays smooth. The side doors have no handles that stick out, which keeps the film clean. For a custom look, a chrome delete covers the window trim and badges with black film.

How much vinyl to wrap a Mazda RX-8 depends on the film choice, because chrome or patterned film takes about 61 ft (18.5 m). The body changed with a restyling in 2008, so bumpers and lights are not the same on earlier and later cars. For all years, a standard color change wrap needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. The coupe body style is the only one for this model.

Questions about wrapping a Mazda RX-8

How much vinyl does it take to wrap a Mazda RX-8?

A Mazda RX-8 takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl for a full wrap. That figure is for the coupe body of this single generation. If you choose chrome or patterned film, plan for about 61 ft (18.5 m).

Which years of the Mazda RX-8 take the same film cuts?

The Mazda RX-8 was built from 2003 to 2012, and the 2008 restyling changed the bumpers and lights. Because of that change, film cut for 2003 to 2008 cars does not fit 2009 to 2012 cars, and the other way around. Cars from 2003 through 2008 share one set of cuts, and cars from 2009 through 2012 share another set.

Can I wrap only the hood or the roof of a Mazda RX-8?

Yes, you can wrap only the hood or the roof of a Mazda RX-8. A partial wrap on this coupe can also cover the mirror caps. These smaller jobs use less film than a full wrap and let you change the look in stages.

Is a Mazda RX-8 hard to wrap?

A Mazda RX-8 is not the hardest car to wrap, but it has two long side doors that are each one large piece of film. Every trim has fog lamps in the front bumper, so the bumper film needs cut-outs. The body is compact at 174.4 in (4,430 mm) to 175.6 in (4,460 mm) long, which helps with film handling. The coupe shape has clean lines, but the door size adds work for one installer.