Wraps by car

Mazda Sentia wrap

This Mazda Sentia wrap page covers the first two generations of the full-size sedan. The first generation ran from 1994 to 1995, and the second ran from 1997 to 2000. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

2generations16.5 mof film for a full wrap

Mazda Sentia, second generation, factory photo
Mazda Sentia, second generation. Factory color shown.

Mazda Sentia wrap colors and ideas

  • Sentia black wrap
  • Sentia white wrap
  • Sentia gray wrap
  • Sentia silver wrap
  • Sentia red wrap
  • Sentia blue wrap
  • Sentia green wrap
  • Sentia yellow wrap
  • Sentia orange wrap
  • Sentia purple wrap
  • Sentia pink wrap
  • Sentia teal wrap
  • Sentia brown wrap
  • Sentia gold wrap
  • Sentia chrome wrap
  • Sentia color shift wrap
  • Sentia carbon fiber wrap
  • Sentia camo and patterned wrap

How much vinyl to wrap a Mazda Sentia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2000sedan (4 doors)192.7 in (4,895 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1994–1995sedan (4 doors)193.9 in (4,925 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Sentia wrap cost factors

Sentia wrap cost depends on the size of the car, the film type, and the amount of disassembly. At up to 193.9 in (4,925 mm) long, this full-size sedan needs around 54 ft (16.5 m) of cast film, and chrome or patterned film adds about 13 ft (4 m). Removing door handles, mirrors, and badges takes extra labor, and the painted surfaces may need correction before wrapping. The final cost changes with the condition of the paint and the number of cut-outs on the bumpers.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Sentia wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Sentia, second generation, factory photo
Factory color shown

1997–2000 Sentia sedan (second generation)

1997–2000sedan (4 doors)192.7 in (4,895 mm)

The 1997–2000 Mazda Sentia is the second generation, with a body length of 192.7 in (4,895 mm). On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap to check adhesion. The paint on older panels can be fragile, and the wrap must be applied with care to avoid lifting. A test spot on each panel type shows whether the film will bond safely.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Mazda Sentia, first generation, factory photo
Factory color shown

1994–1995 Sentia sedan (first generation)

1994–1995sedan (4 doors)193.9 in (4,925 mm)

The 1994–1995 Mazda Sentia is the first generation, with a body length of 193.9 in (4,925 mm). The size and the four-door sedan body mean the same amount of film as the second generation, about 54 ft (16.5 m) of 60-inch material. The long roof and hood are the largest panels, and the number of panels is fixed by the four doors, fenders, bumpers, and trunk. A wrapper counts the same panel set for every Sentia of this generation.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Sentia

A partial wrap on a Mazda Sentia can cover the roof, hood, or mirror caps. Chrome delete is also possible, with black film over the window trim and badges. Paint protection film (PPF) is another option, using clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done on either generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Sentia: body, cut-outs and film

A Mazda Sentia vinyl wrap covers a large four-door sedan with a length of up to 193.9 in (4,925 mm). The full-size body means more film than a compact car, with about 54 ft (16.5 m) of 60-inch material for a standard wrap. The sedan shape has long roof and hood panels that are straightforward to wrap but require careful alignment. The body is one style only, so every wrap is planned around the same panel count.

Sentia wrap ideas start with the parts that need cut-outs for sensors, door handles, and trim. The door handles and mirrors come off for a clean install, and the badges are removed before the wrap. The front and rear bumpers have openings for lights and grilles that need precise trimming. Chrome or patterned film adds about 13 ft (4 m) to the total film estimate because of extra waste on curved areas.

How much vinyl to wrap a Sentia depends mainly on the generation, and both are close in size. The 1994–1995 first generation is 193.9 in (4,925 mm) long, while the 1997–2000 second generation is 192.7 in (4,895 mm). The difference is under 1.2 inches, so the film estimate stays at about 54 ft (16.5 m) for a standard wrap. A wrapper who counts film will treat both generations as the same quantity.

Questions about wrapping a Mazda Sentia

How much vinyl does it take to wrap a Mazda Sentia?

A Mazda Sentia wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for the newest body. This estimate includes the sedan's long roof, hood, and bumpers, with extra material for cut-outs and waste. If you choose chrome or patterned film, the total rises to about 67 ft (20.5 m) because of the need to match patterns. The first generation is nearly the same length, so the figure applies to both generations.

Can I wrap only the hood or the roof of a Sentia?

Yes, you can wrap only the hood or the roof of a Sentia. These are the two most common partial wrap areas, along with mirror caps. A partial wrap uses much less film than a full wrap and can be done in a shorter time. Chrome delete on the window trim and badges is another partial option.

Is a Sentia hard to wrap?

A Sentia is not the easiest car to wrap because of its full-size body and many cut-outs. The long roof and hood panels require a second pair of hands to align the film without wrinkles. The bumpers have openings for lights and grilles that need precise trimming, and the door handles and mirrors must be removed for a clean finish. The paint may also be aged on these cars, so a test spot is needed before the full wrap.

How many generations of the Sentia does this page cover?

This page covers two generations of the Mazda Sentia. The first generation ran from 1994 to 1995, and the second from 1997 to 2000. Both are four-door sedans with nearly the same length, so the wrap film estimate is the same for both.